Bottle Fillers & Disconnects
Duotight Push-In Fitting - 8 mm (5/16 in.) x 3/8 in. BSP
This Duotight fitting with 3/8" male thread can be used to convert any female threaded 3/8" connection to Duotight. Comes with seated O-ring. Compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL18067
$2.99
5/16" x 1/2” Splicer - Stainless Steel
Beer line 5/16" x 1/2" stainless steel barbed splicer. Splices 1/4" I.D. Vinyl to 3/8" I.D. Vinyl 1/4" I.D. Vinyl to 1/2" I.D. Poly 5/16" I.D. Poly to 1/2" I.D. Poly Specifications Type: Straight Connectors Material: 304 Stainless Steel
$3.49
1/2” x 1/2” Vinyl Tubing Splicer - Stainless Steel
Vinyl beer line 1/2" x 1/2" stainless steel barbed splicer. Splices 1/2" I.D. Vinyl to 1/2" I.D. Vinyl Specifications Type: Straight Connectors Material: 304 Stainless Steel O.D.: 7/16" I.D.: 1/2"
$3.99
Duotight 8mm (5/16) x 1/4" BSP Male Bulkhead
This Duotight Bulkhead is the same one used for installing the Thermowell into the lid of the FermZilla. Allows you to add a bulkhead to just about anything that can then be connected to with EVABarrier 8 mm OD Tubing or 5/16" OD stainless or copper tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.
$4.49
6.5 mm (1/4 in.) x 9.5 mm (3/8 in.) Reducer
Duotight 6.5 mm (1/4 in.) x 9.5 mm (3/8 in.) Reducer Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$3.99
Tapcooler Ball Lock Adapter
Easily connect a gas ball lock fitting into your Tapcooler Counter Pressure Bottle Filler with this handy ball lock CO2 adapter! Made of aluminium.
$14.99
Push In Pressure Gauge
This 0-40 psi, push-in pressure gauge comes with an 8 mm (5/16 in.) barb and is specifically designed to be compatible with 8 mm Duotight fittings. It's the ideal companion to the BlowTie Diaphragm Spunding Valve, allowing you to dial in your blow off setting for pressure fermentations or pressure transfers. Triple-scaled to read in psi, bar, and kPa.
$8.99
Grommet for 3/8'' ID SS Tubing
Rubber grommet for chrome plated brass ferrule with 3/8" ID bore.
$0.95
Duotight Push-In Fitting - 8 mm (5/16 in.) Plug
This Duotight plug is used to block up your 8 mm (5/16") tees, elbows or other fittings for gas leak testing or simply to plug an unused section. Features: Insert plug and firmly push to connect Release plug by pushing in the collet on the Duotight fitting Suitable for both gas & beverage applications Made from food-grade acetal plastic Temperature rated to 212°F (100°C)
$1.49
Chrome Plated Brass Ferrule for 3/8'' ID SS Tubing
Brass ferrule for jockey box cooling coil. Chrome plated brass with a 3/8" ID bore.
$3.50
3/8'' x 50' Stainless Draft Coil
3/8" x 50' 304 Stainless Steel Coil This 3/8" draft coil will hold more beer than your typical 5/16" coil meaning it will cool your beer quicker and it will take less CO2 to serve your beer. Using less CO2 will help reduce over carbonating your beer which results in less foam.
$95.00
Duotight 9.5 mm (3/8 in.) x 1/2 in.FPT
This Duotight to 1/2" female thread fitting can be used to connect beverage or gas line to any fitting with 1/2" MPT. Compatible with EVABarrier 9.5 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$2.99
3/16” x 3/16” Splicer, 304 S/S
Stainless steel barbed splicer generally used for attaching two pieces of beer draft line. Specifications 304 Stainless Steel OD: 1/4" ID: 1/16" Splices Tubing Sizes 3/16" I.D. Vinyl to 3/16" I.D. Vinyl 3/16" I.D. Vinyl to 1/4" I.D. Poly 1/4" I.D. Poly to 1/4" I.D. Poly
$3.49
1/4" x 1/2” Splicer - Stainless Steel
Beer line 1/4" x 1/2" stainless steel barbed splicer. Splices 3/16" I.D. Vinyl to 3/8" I.D. Vinyl 3/16" I.D. Vinyl to 1/2" I.D. Vinyl 1/4" I.D. Poly to 1/2" I.D. Vinyl Specifications Type: Straight Connectors Material: 304 Stainless Steel
$3.99
45 degree 1/4" Swivel Elbow
45 degree barbed swivel elbow stem and nut. Specifications: Barb with fit 1/4" ID tubing. Nut is a 1/4" flare fitting. 304 Stainless Steel.
$4.49
Tapcooler Pressure Relief Valve Drain Tube
This drain tube attaches to the pressure relief valve on the Tapcooler Counter Pressure Bottle Filler to drain away excess beer! Having issues with foam and beer leaking from the Tapcooler Counter Pressure Bottle Filler? This pressure relief drain tube hooks directly up to the pressure relief valve of the Tapcooler to drain away excess beer and foam! Measuring 1 meter long (roughly 40 inches), the end of the tube can be placed in a growler or other receptacle so you can keep filling bottles without spillage!
$8.99
Tubing Quick Disconnect, 1/4'' barb x Male
Male quick disconnect with a 1/4" female barb. Includes a shutoff that seals the valve when not connected to tubing.
$9.99
SS304 Cooling Coil - 50' x 5/16'' OD
304 Stainless Steel Cooling Coil. Includes grommets, ferrules, and hex nut fittings for easy connection to shanks. Specifications: Material: Stainless Steel 304 Size: 50ft x 5/16" OD (Tube) Diameter: 5.25" (coil) Height: 6.75" (coil)
$99.99
Duotight Push-In Fitting - 9.5 mm (3/8 in.) Plug
This Duotight plug is used to block up your 9.5 mm (3/8") tees, elbows or other fittings for gas leak testing or simply to plug an unused section. Features: Insert plug and firmly push to connect Release plug by pushing in the collet on the Duotight fitting Suitable for both gas & beverage applications Made from food-grade acetal plastic Temperature rated to 212°F (100°C)
$1.59
Duotight - 9.5 mm (3/8 in.) Joiner
This Duotight joiner fitting is compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$2.99
Deluxe Counter Pressure Bottle Filler
Flush and fill your bottles with ease. This filler has all the great features of the Counter Pressure Bottle Filler with the added benefit of a pressure gauge and flared connections. The gauge helps monitor pressure inside of your bottles and the flared connections make cleaning your lines a breeze. The valve has three positions: off, beer, and gas. Insert filler into the bottle in the off position, switch to gas to flush the bottle with CO2, and then switch to beer to fill your bottle. You can control the speed of your flow with the adjustable pressure relief. This filler is designed for use with 12 oz. bottles but can be used with larger formats by attaching a small piece of 1/4" tubing to the filler.
$90.00
Counter Pressure Accessory Package
Use this kit with your counter pressure bottle filler. This kit includes a gas line tee, gas and beverage quick disconnects, 6' of gas line, flare fittings, and 5' of beer line.
$40.00
Adjustable Pressure Relief Valve with Ball Lock Coupler
This adjustable pressure relief valve can be used when transferring or filtering beer from one keg to another. The end of the pressure valve turns to let you adjust the amount of pressure released.
$24.99 $21.99
Duotight 9.5 mm (3/8 in.) x 1/2 in. BSP
This Duotight fitting with 1/2" male thread is perfect for attaching to the Copper Counterflow Chiller and using with 1/2" female threaded Camlock and QD fittings. Compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$2.99
3/16” x 1/4” Splicer, Stainless
3/16" x 1/4" hose splicer, 303 stainless (for 3/16"ID and 1/4"ID hose).
$2.99
Gas Pressure Relief, Stainless
Gas Manifold - Pressure Relief Valve 1/4" Male ThreadingSet to blow off at 55psi.
$10.00
1/2” x 1/2” Splicer - Stainless Steel
Beer line 1/2" x 1/2" stainless steel barbed splicer. Splices 3/8" I.D. Vinyl to 3/8" I.D. Vinyl 3/8" I.D. Vinyl to 1/2" I.D. Poly 1/2" I.D. Poly to 1/2" I.D. Poly Specifications Type: Straight Connectors Material: 304 Stainless Steel O.D.: 1/2" I.D.: 3/8"
$3.49
1/4" Barbed Ball Valve
Plastic ball valve with 1/4" barb fittings on each end.
$9.99 $6.99
Duotight Push-In Fitting - 9.5mm (3/8 in.) Female Bulkhead
This Duotight fitting is designed to go through the wall of a tank, housing, or wall, similar to a pass through shank, so you can run EVABarrier tubing from one side to the other. Compatible with EVABarrier 9.5 mm OD tubing. With the lock nuts in place, there is approximately 1" of pass through threading. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.
$3.49
Elbow Tailpiece, 5/16'' Barb, Stainless Steel
Stainless steel elbow tailpiece with 5/16" OD Barb
$5.99
Monotight Push-In Fitting - 6.35 mm (1/4") Female x 6.35 mm (1/4") Male Elbow
The Monotight Elbow Piece is suitable for 6.35 mm (1/4") PE tubing or most lines with a 6.35 mm outer diameter. It is designed for use with stiff PE tubing that is commonly used in water treatment equipment, water filters, reverse osmosis fittings, and other appliances that are directly connected to water lines. These fittings will not fit 8 mm or 9.5 mm OD EVABarrier line Monotight push in fittings have been engineered for maximized performance in both gas and liquid applications. No other push ins on the market have EPDM o-rings. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-ring made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.
$1.99
Co2 Disconnect Tailpiece
If you use different kegs and couplers on a normal basis, save time by add quick disconnects to your draft systems gas line tubing. Place a quick disconnect fitting in the gas line and no tools are needed to disconnect from the gas source. Simply pull back the sleeve on the female side and the connection separates and the gas is shut off. Note: To make a complete set please order the Disconnect Air Coupler. Specifications: Connection: Male Side Length: 1-1/4" Barb: 3/8" O.D. (to fit 5/16" I.D. Gas Hose) Material: Brass (not chrome plated)
$9.99
Tapcooler Beer Valve Keg Connector
Want to bottle directly from your ball or pin lock keg using the Tap Cooler Counter Pressure Bottle Filler? This beer valve connector tube assembly will allow you to do just that! Setup is a snap. Simply remove the faucet fitting on the Tapcooler filler, attach the valve end, attach a ball (or pin) lock connector into the included swivel nut set on the tubing, and hook to your keg, and get to bottling! The valve acts as the beer faucet normally would, starting and stopping flow directly from the keg. The attached tubing is 2 meters (about 78 inches) long, giving you plenty of versatility in your bottling range. Another great accessory from Tapcooler! Tapcooler and ball lock disconnect not included.
$39.99
Tapcooler Filler Extension Tube
The Tapcooler extension tube is perfectly suited to provide the counter pressure filler a bit of extra space for the bottles where there is not enough room to fit them directly under the tap. The one end of the connection hose is designed to screw into the top of the filler unit and the other end of the tube is designed to screw into the filler unit's removable tap nozzle insert. Includes two small o-rings to seal the extension line on either end (there is already an o-ring seal inside the filler unit when the tap nozzle insert is removed). Tubing (based on length chosen) Stainless steel faucet fitting Stainless steel Tapcooler fitting Required o-rings for sealing purposes Comes pre-assembled!
$17.99
Grommet for 5/16'' ID SS Tubing
Rubber grommet for chrome plated brass ferrule with 5/16" ID bore.
$1.95
Elbow Tailpiece, 3/8'' Barb, Stainless Steel
Stainless steel elbow tailpiece with 3/8" Barb
$6.95