Transfering & Racking

Clear, flexible, and food-safe, this polyvinyl chloride (PVC) tubing is perfect for handling beverages and liquids. Fits 3/8" auto-siphons and racking canes. Material: PVC (polyvinyl chloride) ID: .313 (5/16) OD: .4375 (7/16) Max. Pressure: 45 psi (at 70°F. Higher temperatures lower maximum working pressures.) Max. Temperature: 150°F  Sells by the foot or by a 100' roll. Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.

Read more less

3/8” outside diameter racking tube fits a standard 5/16" hose. Includes a 23" racking tube. Maximum Temperature: 140 °F (60 °C) Starts siphon with a single stroke. Made out of Acrylic. BPA Free. Include the Anti-Sediment Tip. To prolong the life of your Easy Siphon, make sure that every time you assemble the unit, the inner walls of the outside acrylic tube and the O-Ring are wet. This product is not resistant to high levels of alcohol. Do not sanitize with alcohol. Acrylic is safe for long exposure to ABV (alcohol by volume) up to 15%. It is safe up to 30% ABV for short periods of time (10 minutes or so). Not safe to expose acrylic to more than 30% ABV. Exceeding those limits will damage the Acrylic and could potentially leach into the liquid. If you need to exceed these limits, please use a different product. FAQ Q. My Easy Siphon draws air while transferring?A. If air is coming from the bottom (O-Ring) you can do the following: Check your Anti-Sediment Tip, in case there is some sediment there. Reduce the siphoning height to 20 to 28" above your transferring level. Give the inner tube a twist with your hand. Make sure that the Center Tube with Seal is below the wine/beer level. Does not include 5/16" ID tubing.

Read more less

3/8” outside diameter racking tube fits a standard 5/16" hose. Includes a 15" racking tube. Maximum Temperature: 140 °F (60 °C) Starts siphon with a single stroke. Made out of Acrylic. BPA Free. Include the Anti-Sediment Tip. To prolong the life of your Easy Siphon, make sure that every time you assemble the unit, the inner walls of the outside acrylic tube and the O-Ring are wet. This product is not resistant to high levels of alcohol. Do not sanitize with alcohol. Acrylic is safe for long exposure to ABV (alcohol by volume) up to 15%. It is safe up to 30% ABV for short periods of time (10 minutes or so). Not safe to expose acrylic to more than 30% ABV. Exceeding those limits will damage the Acrylic and could potentially leach into the liquid. If you need to exceed these limits, please use a different product. FAQ Q. My Easy Siphon draws air while transferring?A. If air is coming from the bottom (O-Ring) you can do the following: Check your Anti-Sediment Tip, in case there is some sediment there. Reduce the siphoning height to 20 to 28" above your transferring level. Give the inner tube a twist with your hand. Make sure that the Center Tube with Seal is below the wine/beer level. Does not include 5/16" ID tubing.

Read more less

Tasteless, odorless, and food grade approved from -100F to 500F. This tubing is rated to 20 PSI and will burst at 30 PSI at 70F. It is not recommended for use with an impeller pump or household water pressure. 1/2" ID 7/8" OD 30 PSI Burst at 70F Platinum Cured  

Read more less

Clear, flexible, and food-safe, this polyvinyl chloride (PVC) tubing is perfect for handling beverages and liquids. The 7/16″ tubing is recommended for 1/2″ auto-siphons.  Material: PVC (polyvinyl chloride)  ID: .438 (7/16)  OD: .688 (11/16)  Wall: .125 (1/8) Max. Pressure: 30 psi (at 70 °F. Higher temperatures lower maximum working pressures.) Max. Temperature: 150°F  Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.

Read more less

Clear, flexible, and food-safe, this polyvinyl chloride (PVC) tubing is perfect for handling beverages and liquids. Material: PVC (polyvinyl chloride) ID: 3/8" OD: 1/2" Wall: 1/8"  Max. Pressure: 40 psi (at 70°F. Higher temperatures lower maximum working pressures.) Max. Temperature: 150°F  Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.

Read more less

Tasteless, odorless, and food grade approved from -100F to 500F. This tubing is rated to 20 PSI and will burst at 30 PSI at 70F. It is not recommended for use with an impeller pump or household water pressure. 3/8" ID 5/8" OD 30 PSI Burst at 70F Platinum Cured

Read more less

1/2” outside diameter racking tube fits a standard 7/16" hose. Includes a 23" racking tube. Maximum Temperature: 140 °F (60 °C) Starts siphon with a single stroke. Made out of Acrylic. BPA Free. Include the Anti-Sediment Tip. To prolong the life of your Easy Siphon, make sure that every time you assemble the unit, the inner walls of the outside acrylic tube and the O-Ring are wet. This product is not resistant to high levels of alcohol. Do not sanitize with alcohol. Acrylic is safe for long exposure to ABV (alcohol by volume) up to 15%. It is safe up to 30% ABV for short periods of time (10 minutes or so). Not safe to expose acrylic to more than 30% ABV. Exceeding those limits will damage the Acrylic and could potentially leach into the liquid. If you need to exceed these limits, please use a different product. FAQ Q. My Easy Siphon draws air while transferring?A. If air is coming from the bottom (O-Ring) you can do the following: Check your Anti-Sediment Tip, in case there is some sediment there. Reduce the siphoning height to 20 to 28" above your transferring level. Give the inner tube a twist with your hand. Make sure that the Center Tube with Seal is below the wine/beer level. Does not include 7/16" ID tubing.

Read more less

Clear, flexible, and food-safe, this polyvinyl chloride (PVC) tubing is perfect for handling beverages and liquids. Material: PVC (polyvinyl chloride) ID: 1/2" OD: 5/8" Max. Pressure: 25 psi (at 70°F. Higher temperatures lower maximum working pressures.) Max. Temperature: 150°F  Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.  

Read more less

3/8" x 30" plastic racking cane, uses 5/16" ID tubing.

Read more less

Need to stop your siphon flow?  This large siphon clamp provides a freer flow and accommodates up to 1/2" ID tubing.

Read more less

Tasteless, odorless, and food grade approved from -100F to 500F. This tubing is rated to 20 PSI and will burst at 30 PSI at 70F. It is not recommended for use with an impeller pump or household water pressure. 1/4" ID  7/16" OD Platinum Cured Will burst at 30 PSI at 70F

Read more less

This clamp will hold the 3/8" auto-siphon in place on your bucket or carboy.

Read more less

Clear, flexible, and food-safe, this polyvinyl chloride (PVC) tubing is perfect for handling beverages and liquids. Material: PVC (polyvinyl chloride) ID: 1/4" OD: 3/8" Max. Pressure: 50 psi (at 70°F. Higher temperatures lower maximum working pressures.) Max. Temperature: 150°F Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.

Read more less

Tasteless, odorless, and food grade approved from -100F - 500F. This tubing is rated to 20 PSI and will burst at 30 PSI at 70F. It is not recommended for use with an impeller pump or household water pressure. 5/16" ID  1/2" OD Will burst at 30 PSI at 70F

Read more less

4 feet of 1" ID tubing to fit into the mouth of a glass carboy as a blow off tube.

Read more less

3/8" x 18" plastic racking cane includes a tip for reduced sediment pickup. Works great for gallon jugs. This cane uses 5/16" ID tubing.

Read more less

This assembly includes a 3/8" x 30" plastic racking cane, 5' of 5/16" ID clear vinyl tubing, and a plastic clamp to stop the siphon flow if necessary.

Read more less

Tasteless, odorless, and food grade approved from -100F to 500F. This tubing is rated to 20 PSI and will burst at 60 PSI at 70F. It is not recommended for use with an impeller pump or household water pressure. Inner Diameter: 3/16" Outer Diameter: Approximately 3/8" Working Pressure: 20 psi Burst Pressure: 60 psi Material: Silicone Function: High Temperature

Read more less

This clamp will hold the 1/2" auto-siphon in place on your bucket or carboy.

Read more less

Plastic racking cane that is 1/2" OD and 26" in length.  Includes a black anti-sediment tip. It is recommended to use 7/16" ID tubing with this cane.

Read more less

3/8" x 26" stainless steel racking cane with anti-sediment tip. This cane uses 5/16" ID tubing.

Read more less

Fits 3/8" racking canes, clips to the side of your bucket or carboy.

Read more less

The Super Sucker transfer pump is the perfect solution to moving beer or wine between vessels without the hassle of starting a siphon or positioning carboys and kegs to use gravity. Eliminates excess oxygen exposure that results from hand-pumping a siphon or blowing into a carboy hood. Use 3/8" ID tubing to hook up the Super Sucker to a racking cane and run a length from the outlet to the receiving vessel. The pump is self-priming and features a convenient on/off switch in-line on the power cord. Features: Self-Priming 10 mm Barbed Inlet/Outlet On/Off Switch Max Flow: 1.12 Gal/min Suction: 5 in. Max Lift: 150 in. (12.5 ft.) Maximum Temperature: 140°F Pressure: 90 psi Voltage: 12V DC (3.5A)  

Read more less

This assembly includes a 3/8" x 18" plastic racking cane, 5' of 5/16" ID clear vinyl tubing, and a plastic clamp to stop the siphon flow if necessary. This shorter racking cane is recommended for smaller fermenters such as jugs, jars, and small pails.

Read more less

The Easy Siphon Clip holds your Easy Siphons to Carboys, Pails, Fermonsters, Buckets and more! Works with: Easy Siphon 3/8 ** New Revamped (7/8” thick) Easy Siphon 1/2 ** New Revamped (7/8” thick) Mini Easy Siphon Sampler Easy Siphon 3/8 and 1/2 “Previous Version” (1” thick) BPA free Made with food grade materials Maximum recommended temperature 70 °C (158 °F) Made from lasting plastic materials, so you can clip and unclip your Easy Siphons without issues. **If the product is used with the Old Design, it will not work with the New design afterwards as the clamps will adapt to the bigger diameter

Read more less

Replacement tip for 3/8" racking canes

Read more less

A compact submersible pump for small cooling projects or building a DYI bucket carboy/keg cleaning system. Specifications: Maximum flow rate: 800 GPH Max lift height: 9 ft. Comes with 2 barb fittings - 1/2" & 3/4"  High quality 60W motor runs quiet Stainless steel impeller shaft 6 ft. long power cord For cooling, recommended for batch sizes less than 10 gallons.

Read more less

1/2" x 26" stainless steel racking cane with anti-sediment tip, uses 7/16" ID tubing

Read more less

Made of plastic. Clips to side of a carboy or bucket. Keeps siphon tube in place during racking. Makes a difficult step much easier. Fits 1/2" tubing.

Read more less

It's time to go with the (higher) Flow. With features like an Air Relief Valve (ARV), 6-vane impeller design, stainless steel precision machined casting and an integrated impeller shaft and thrust bearing, the Flow is the newest and most badass pump to hit the market. Higher Pressure & Flow-What's more important? Moving your wort quickly or a powerful CIP? The Spike Flow is leading at both. No compromises here.  Air Relief Valve-Air in your lines creating headaches? The Flow features an ARV bleed system. Problem solved.  Clog Proof Impeller-With the built-in chopping tines on the impeller, you'll never have to stop mid-Brew Day because of a clogged pump head.  Quietest on the Market-The Flow is for brewers who prefer listening to their brewing playlist or the game on TV rather than a loud pump.  Specs:  • Best-in-class 9GPM (gallons/minute) flow rate• Best-in-class 9.5 PSI of pressure • Air Relief Valve (ARV) makes priming easy and convenient• Built in 1/2" drain barb• 6-vane impeller design optimized for performance and durability• 304 stainless steel precision machined casting with maximized inlet and outlet ports• Integrated chopping tines to prevent clogging• Black anodized motor shell and shot-blasted housing• Easy disassembly, cleaning and reassembly• Ultra-quiet, fan enclosed motor: 120v, 60 Hz • 6 foot power cord • 9" length x 5" width x 7" height • Continuous use rated Available in NPT fittings or TC fittings

Read more less

Replacement tip for 3/8" auto-siphon

Read more less

The Vintage Shop Super Transfer Pump is quick, compact and portable.It is easy to install anywhere, since it comes with mountable shock-absorbing feet.This self-priming unit is specially designed to save you time. You can transfer a 5-gallon carboy in approximately 1.5 minutes. It flows at a rate between 1 to 3 GPM (gallons per minute). Has an on/off switch with variable flow adjustment dial and a 5' electrical cord. Comes with a quick disconnect pre-filter to prevent clogging of the pump head. Comes with hoses, clamps, fittings and a spanner wrench. BPA Free Packaged pump total weight: 3.5 Kg (7.7 Lbs).Pump Specifications: Flow rate from 1 to 3 gallons per minute. Motor type AC. 110 Volts, 0.5 Amp, 60 Hz.

Read more less

Plastic in-line tubing valve for 3/8" ID tubing

Read more less

This siphon assembly includes a 1/2" x 26" racking cane with anti-sediment tip, 5' of 7/16" ID clear vinyl tubing, and a large plastic clamp to stop the flow if necessary.

Read more less