Keg Couplers Main

This Ball Lock Disconnect (Liquid) by CM Becker provides a secure liquid flow with a durable plastic coupler and 1/4" MFL male flare thread. Its reliable seal and robust construction make it an ideal choice for Cornelius kegs.

Read more less

CM Becker plastic ball lock gas in coupler with 1/4" MFL.  Quick disconnect for ball lock Cornelius (Corny)-type kegs.The 1/4 inch male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available.

Read more less

The "D" system keg coupler, also known as American Sankey, is the most common system available in the USA. It is used by all the major North American breweries as well as most craft breweries. The keg coupler connects to the keg valve, "tapping" the keg. Both the gas line from the CO2 tank/regulator and the beer hose to the beer faucet attach to the coupler. Features Chrome plated brass body Tin-nickel plated probe Short handle is ideal for the smaller diameter 1/6 kegs Specifications System: "D" (American Sankey) Body Material: Chrome plated brass Probe Material: Tin-nickel alloy plated Handle Style: Lever Gas Port: 3/8" O.D. Barb (To fit 5/16" I.D. Gas Hose) Beer Port: 7/8"-14 Thread (U.S. Beer Industry Standard) Height: 3-13/16" Manufacturer: Micro Matic ⚠️WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. www.P65Warnings.ca.gov

Read more less

Beer line assembly for your corny keg hook up. We build the assembly, you just need to secure the the ball lock disconnect to your corny keg. For outdoor dispensing we recommend selecting the black vinyl tubing. This assembly includes: 5' of 3/16"" ID vinyl draft tubing CMB Liquid ball lock disconnect with 1/4" flare fitting 1/4" swivel nut with 1/4" stainless steel hose barb stem 13.3 stepless hose clamp Plastic hand held faucet

Read more less

Liquid coupler for cornelius keg with 1/4 barb.

Read more less

This Ball Lock Disconnect (Gas) connector is the perfect solution for cornelius kegs. Made by CM Becker plastic, this 3/8'' barbed connector is designed for a long-lasting and reliable connection.

Read more less

Gas line assembly for your corny keg hook up. We build the assembly, you just need to secure the open end  of the tubing to the 5/16" barb on your regulator with the gear hose clamp and the ball lock disconnect to your corny keg. This assembly includes: 4' of 5/16" ID red vinyl tubing Gas ball lock disconnect with 1/4" flare fitting 1/4" swivel nut with 5/16" stainless steel hose barb stem 15.7 stepless hose clamp Stainless steel gear hose clamp

Read more less

Adapt your sanke style coupler to accept a ball lock coupler with this stainless steel fitting.   Liquid ball lock post for sanke coupler.   Stainless Steel

Read more less

Adapt your sanke style coupler to accept a ball lock coupler with this stainless steel fitting.   Gas ball lock post for sanke coupler. Stainless Steel.

Read more less

Micro Matic 304 stainless steel, Sankey D probe coupler for American kegs.  Good for dispensing beer, wine, and cider. "D" system is the most common system available in the U.S., also known as American Sankey. It is used by all the major breweries Anheuser-Busch, Miller, Molson-Coors, and Labatt as well as most craft breweries. The keg coupler connects to the keg valve, "tapping" the keg. Both the gas line from the CO2 tank/regulator and the beer hose to the beer faucet attach to the coupler. Specifications: 304 stainless steel body improves durability and resistance to chemicals 304 stainless Steel probe for the ultimate in purity Excellent for beer, wine, and cider 304 stainless steel handle fork for added strength Short handle is ideal for the smaller diameter 1/6 kegs NSF approved Made in the USA

Read more less

Concave check valve for sanke style keg couplers. This check valve helps to prevent liquid from backing into the Co2 line.

Read more less

The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world.  Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required This particular ball lock disconnect has been designed for use with EVABarrier 8 mm OD Tubing. Due to the integrated Duotight fitting the line will simply push directly into this fitting. Ball Lock Quick Disconnect - Gas In Direct connect 8 mm OD EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Disassemble by hand for quick and easy cleaning Duotight Ball Lock QDs are offered in three sizes that correspond to the outer diameters seen on our line of EVABarrier Draft Tubing.  6.35 mm OD – features a very tight 3 mm ID that requires only 3.2 ft of length for adequate flow resistance. This is the ideal size for mobile draft or if you want to keep your kegerator as tidy as possible. 8 mm OD – the most common OD size of EVABarrier tubing. This size comes in two IDs (4 mm & 5 mm) and pairs up with the lion's share of Duotight fittings and accessories. 4 mm ID is our most recommended size for beverage lines, requiring 5-6 ft. lengths. 5 mm ID is commonly used as gas line or when 10-12 ft. beverage lines are required. 9.5 mm OD – suitable for gas lines or long draw beverage lines. At 6.3 mm ID, this size is ideal for beverage lines that will be 20 ft. or longer in length.

Read more less

This pump is a budget solution for dispensing beer and cider at parties, picnics, and special occasions.  Since this is a hand pump tap, it is best when dispensing a whole keg that same day or night. For use with American sanke D style kegs.

Read more less

The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world.  Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required This particular ball lock disconnect has been designed for use with EVABarrier 8 mm OD Tubing. Due to the integrated Duotight fitting the line will simply push directly into this fitting. Ball Lock Quick Disconnect - Beverage Out Direct connect 8 mm OD EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Disassemble by hand for quick and easy cleaning

Read more less

Sankey coupler bottom seal also known as a skirt washer. Specifications: Type: Seal O.D.: 1-9/16" I.D.: 1-3/16"

Read more less

This ball lock to hex nut beer draft beer line assembly will connect a corny keg liquid post to a faucet shank. Includes: 5' of 3/16 ID clear vinyl draft tubing 1 x CMB liquid out corny keg connector, 1/4 mfl 1 x 1/4" swivel stem (stainless steel) with nut (chrome plated) 1 x 304 stainless steel tailpiece 1 x hex nut (chrome plated brass) 1 x hex nut washer 2 x 13.3 stepless oetiker clamp

Read more less

Molded probe seal washer for D style sankey couplers.

Read more less

This hex nut to hex nut beer draft beer line assembly will connect a sanke coupler to a faucet shank. Includes: 5' of 3/16 ID clear vinyl draft tubing 2 x 304 stainless steel barbed tailpiece 2 x hex nut (chrome plated brass) 2 x hex nut washer 2 x 13.3 stepless oetiker clamp

Read more less

This stainless steel flow control disconnect will eliminate the guess work of balancing draft lines. Use the adjustment knob to dial in the ideal flow resistance based on the beverage being served. Flow control disconnects perform better than flow control faucets as they put the point of resistance at the beginning of the beverage line instead of at the end. When beer passes through the flow control apparatus inside the faucet, turbulence will cause carbonation to come out of solution and foaming issues occur.  Flow control disconnects on the other hand have the ability to restrict the flow before the beer enters the beer line so the head pressure created by the beer line keeps the carbonation in solution. 1/4" flare thread for beverage line connection. Please note: make sure your keg post o-rings are in good condition before using this fitting. If they are overly worn and you are not getting a good seal, replace the post o-ring then re-attach the ball lock fitting.

Read more less

This kit allows you to connect to and dispense from a sanke coupler. It includes 5' of 3/16" ID draft tubing, handheld faucet, 304 stainless steel barbed tailpiece, 13.3 stepless clamp, and a hex nut with washer. We recommend selecting the black draft tubing if dispensing outdoors.

Read more less

This pump is great for parties and special occasions. This is a hand pump tap, so your beer will go flat overnight. This is designed for parties where you plan on drinking the whole keg that same day or night.  American Sanke D System Black Lever Coupler Low Profile Plastic Pump

Read more less

Check ball retainer for sankey D and S style couplers.

Read more less

Transfer beer from ball lock corny keg to ball lock corny keg with this jumper assembly. Includes 4 feet of 3/16" ID draft tubing and 2 CMB liquid ball lock connectors.

Read more less

Make your cleaning day a breeze with this QD Jumper post.  No need to remove the Ball lock disconnects at all. The cleaner solution goes right through the Ball Lock Keg cleaning post. Connect multiple beer lines and Ball lock kegs in a daisy chain and clean them all in one go. Specifications: Made of Stainless steel material. Includes O rings on both ends. Jumper between the beer lines for easy cleaning. Ball lock kegs are widely used in home-brewing. Hence a handy tool for all home-brewers. Note: Pictured ball lock coupler not included.

Read more less

Helps prevent kinked tubing in low clearance situations. - 90 degree angle -Thread: 7/8“-14 (5/8" BSP) - Includes washer

Read more less

Sanke Coupler Hose Nipple, 3/8" Barb For use on the gas side of a sanke coupler.  Fits into concave check valve.

Read more less

If you want an easy way to balance your beer lines, this is the way to do it. One of the benefits of Flow Control disconnects is you don't need to rely on the small ID or line length to apply flow resistance. Rather than adjusting your line length or size, simply apply additional restriction directly on the Quick Disconnect (QD). This is perfect for people who want to serve a large range of beverages with differing carbonation levels without having to customize each line. Now with the added benefit of Duotight fittings built in. Please be aware that even in the fully open position these FC disconnects do have some inherent flow resistance so you should use either shorter line or larger ID line that you would when compared with traditional ball lock disconnects.  The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world.  Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required. Features: Ball Lock Quick Disconnect - Bev Out Adjustable flow rate Direct connect EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Dissamble by hand for quick and easy cleaning

Read more less

304 Stainless steel ball lock gas (in) side connector with 1/4" flare connection.

Read more less

Replacement check ball for Taprite sanke coupler Specifications: .375 Diameter Nylon

Read more less

304 Stainless steel ball lock liquid (beverage out) side connector with 1/4" flare connection.

Read more less

This CM Becker pin lock style disconnect is made in Germany and assembled in the USA.  It is for the three pin liquid connection and features a short body and a 1/4" flare connection. Most commonly, you will need a 1/4" swivel nut with 1/4" barb to connect the standard 5/16" red gas line. For EvaBarrier tubing, a Duotight 8mm with 1/4 flare fitting is a common connector.

Read more less

This CM Becker pin lock style disconnect is made in Germany and assembled in the USA.  It is for the two pin gas connection and features a short body and a 1/4" flare connection. Most commonly, you will need a 1/4" swivel nut with 5/16" barb to connect the standard 5/16" red gas line. For EvaBarrier tubing, a Duotight 8mm with 1/4 flare fitting is a common connector.

Read more less

This inline check valve can be used with any gas-in ball lock or pin lock flared disconnect. It allows gas to flow through while preventing the backflow of liquid. Made in Germany and assembled in the USA by CM Becker.

Read more less

Plastic ball lock gas in coupler with 1/4" MFL.  Quick disconnect for ball lock Cornelius (Corny)-type kegs. This disconnect has an internal check valve that will allow the gas to flow out, but won’t allow backflow of liquid back into your system.

Read more less