Plastic Fermenters

Brewmaster branded 6.5 gallon bucket for fermentation, cleaning and sanitizing, and general use. Made of food grade HDPE, lightweight and strong. This bucket has volume markers printed on the side in 1/2 gallon increments, up to 5 gallons.  Also available with a predrilled hole for a bottling spigot addition. Lid options are solid and drilled with grommet and are sold separately.

Read more less

Pail fermenter lid that fits the Brewmaster branded 6.5 gallon pail fermenter and the 6.5 gallon pail fermenter with spigot hole. This lid does not have a sealing o-ring gasket to seal the bucket air tight. Available with an airlock grommet insert or as an solid lid without an airlock hole.

Read more less

2 gallon food grade plastic bucket.  A perfect size as a primary fermenter for 1 gallon batches of fruit wine. Lid sold separately.

Read more less

Grommeted plastic lid for 7.9 gallon bucket fermenter.  Made from Polypropylene. Please Note: The lid forms a very tight seal and requires a decent amount of downward force to lock into place.

Read more less

A 7.9 gal (30 L) food-grade plastic bucket. Ideal for all fermentations, but especially ideal for wine kits, beers that tend to have a high krausen (hefe) and any fermentation that is slightly too large for your 6 gallon pail. The smooth walls are easier to clean compared with other blow molded fermenters that have quite porous walls. Why Polypropylene?   These buckets are made from polypropylene as it is less porous and significantly smoother than other HDPE fermenters. HDPE is porous and can harbor microbial activity making it more difficult to clean and sanitize. Being less porous, polypropylene also does not absorb aroma like HDPE so there is less flavor carry over from batch to batch.   Note: These buckets come molded with a threaded hole for a spigot to screw into. We recommend the Italian bottling spigot.   Please note: the spigot hole comes pre-molded into the bucket and needs to be drilled out before installing the spigot. It is recommend using a 5/8" drill bit, taking care not to strip the female threads that accept the spigot. The spigot includes a back nut that won't be needed—simply remove the back nut and thread in the spigot with the gasket in between the neck of the spigot and the bucket. The lid forms a very tight seal and requires a decent amount of downward force to lock in place. Lid sold separately.

Read more less

Lid for 2 gallon bucket with a grommet that will accommodate an airlock.

Read more less

This spigot fits standard 5/16", 3/8", and 7/16" hose. It's small body makes it easy to clean and it takes less space than other spigots.  The short spigot fitting design makes it easier to place closer to the bottom of the primary.  The hose will not turn when the valve is open and closed. Includes a gasket and nut.  Will fit in a 1" hole. 

Read more less

Gasketed lid for 7.8 gallon BSG Handcraft branded fermenter pail.  Available with or without the grommet for an airlock.

Read more less

Spigot fits standard 1/2" hose. When the valve is open and closed, the hose does not turn. Small body makes it easy to clean and takes less space than regular spigot. The short spigot design makes it easy to place it closer to the bottom of the primary. Comes assembled with gasket and nut. Fits 1" hole.

Read more less

Five gallon PET plastic carboy Made of heavy PET, BPA free plastic. Ideal for secondary fermentations of both wine and beer and for bulk aging of wine. Completely taste and odor free and stain resistant. No side-wall ribs to collect yeast or sediment, making it easy to clean. Impermeable to oxygen. Closure options:  #10 rubber stopper #10 breathable bung Buon vino intermediate stopper #26 tapered cork Silicone bung for large barrel  

Read more less

Solid lid for a 2 gallon bucket.

Read more less

Six gallon PET plastic carboy Made of heavy PET, BPA free plastic. Ideal for secondary fermentations of both wine and beer and for bulk aging of wine. Completely taste and odor free and stain resistant. No side-wall ribs to collect yeast or sediment, making it easy to clean. Impermeable to oxygen. Closure options:  #10 rubber stopper #10 breathable bung Buon vino intermediate stopper #26 tapered cork Silicone bung for large barrel

Read more less

The 7 Gallon Wide Mouth FerMonster Carboy.With a wider 4" mouth, there is easier access for cleaning. It is made of heavy PET plastic. Comes with an o-ring and air-tight one piece lid with a hole that will take a #10 stopper (not included). There are no ribs, only smooth sides, so no yeast or sediment will adhere to walls during fermentation. Completely taste and odor-free. It is also stain resistant. Impermeable to oxygen. 100% made in Canada. Comes with 5 gallon, 6 gallon and 7 gallon easy-to-read markings on the side. Also they are big enough so you can use them as your primary fermenter. The FerMonster is hard to carry, we strongly suggest that you purchase a carboy carrier (make sure it fits your specific size of carboy).

Read more less

The Italian bottling spigot is a high quality, durable plastic spigot.The face of this spigot rotates so you're able to sit your bucket flush on the counter when needed and it disassembles for easy cleaning. Attach 3/8" I.D. tubing and your bottle filler for easier bottling. 

Read more less

Three gallon PET plastic carboy Made of heavy PET, BPA free plastic. Ideal for secondary fermentations of both wine and beer and for bulk aging of wine. Completely taste and odor free and stain resistant. No side-wall ribs to collect yeast or sediment, making it easy to clean. Impermeable to oxygen. Closure options:  #10 rubber stopper #10 breathable bung Buon vino intermediate stopper #26 tapered cork Silicone bung for large barrel

Read more less

The 3 Gallon Wide Mouth FerMonster Carboy.With a wider 4" mouth, there is easier access for cleaning. It is made of heavy P.E.T. plastic. Comes with an O-ring and air-tight one piece lid with a hole that will take a #10 stopper (not included). There are no ribs, only smooth sides, so no yeast or sediment will adhere to walls during fermentation. Completely taste and odor-free. It is also stain resistant. Made from PET plastic which is far more resistant to oxygen than regular plastic. 100% made in Canada. Weighs 1.5 lbs Rated to 140 degrees F Height: 14.6 inches Diameter: 9 inches Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage!

Read more less

The 6 Gallon Wide Mouth FerMonster Carboy.With a wider 4" mouth, there is easier access for cleaning. It is made of heavy P.E.T. plastic. Comes with an O-ring and air-tight one piece lid with a hole that will take a #10 stopper (not included). There are no ribs, only smooth sides, so no yeast or sediment will adhere to walls during fermentation. Completely taste and odor-free. It is also stain resistant. Impermeable to oxygen. 100% made in Canada. Comes with 5 gallon, 6 gallon and 7 gallon easy-to-read markings on the side. Also they are big enough so you can use them as your primary fermenter. The FerMonster is hard to carry, we strongly suggest that you purchase a carboy carrier (make sure it fits your specific size of carboy).

Read more less

Similar to the italian bucket spigot, this one rotates when attached to the bucket.  The barb will accommodate either 3/8" ID or 1/2" ID tubing.  The interior nut has a unique design where the opening can be rotated up to effectively block sediment if the bucket is used for fermentation.  Or, the opening can be rotated down when used in a bottling bucket.  

Read more less

This pail opening tool easily pries open bucket lids. Color may vary

Read more less

The 1 Gallon Wide Mouth FerMonster Carboy.With a wider 4" mouth, there is easier access for cleaning. It is made of heavy P.E.T. plastic. Comes with an O-ring and air-tight one piece lid with a hole that will take a #10 stopper (not included). There are no ribs, only smooth sides, so no yeast or sediment will adhere to walls during fermentation. Completely taste and odor-free. It is also stain resistant. Made from PET plastic which is far more resistant to oxygen than regular plastic. 100% made in Canada. Weighs 0.6 lbs Rated to 140 degrees F Height: 9.45 inches Diameter: 6.7 inches Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage!

Read more less

Unlock the FermZilla's true potential with the FermZilla Pressure Kit. This will enable fermenting under pressure, carbonating, and serving without ever needing to move beer out of the fermenter. The kit inlcudes two stainless female threaded ball lock fittings with barbs, which thread onto the existing openings atop the FermZilla's lid. A silicone dip tube with stainless steel float work as the beverage out, allowing only the clearest beer from top of the tank to be dispensed. The Pressure Kit will turn the FermZilla into a true unitank! This pressure kit features a 23" silicone dip tube, which is appropriately sized for the 27L FermZilla. Key Features: Ferment beer under pressure to reduce ester and fusel alcohol production Always draw clear beer with the floating dip tube Keg beer that has already been carbonated Use CO2 to push beer into a keg or through a filter into a keg Eliminate kegging altogether by carbonating and serving directly from the FermZilla  Please note: pressure kit does not include the lid pictured in the example photo. The ball locks and floating dip tube are installed on the FermZilla's existing lid.

Read more less

Replacement gasket for spigots.

Read more less

Speidel fermenters are safer than glass carboys, easier to keep clean that plastic carboys, and easier to transfer contents that either.  These fermenters are made out of HDPE and are extremely durable.Key Features: 7.9 gallons, 30 liters Heavy duty HDPE construction is durable and resists oxygen transfer. Built-in handles make these tanks easy to move, even when full. Large lid opening makes them easy to clean by hand. All ports seal with gaskets and the vessel can be fully sealed for long-term storage. Includes a spigot and airlock. Approximate Dimensions: 13.5in Diameter x 18.5in Height (w/out airlock in place). Note: The maximum temperature that these plastic fermenters can handle is 140F.

Read more less

Speidel fermenters are safer than glass carboys, easier to keep clean that plastic carboys, and easier to transfer contents that either.  These fermenters are made out of HDPE and are extremely durable.Key Features: 15.9 gallons, 60 liters Heavy duty HDPE construction is durable and resists oxygen transfer. Built-in handles make these tanks easy to move, even when full. Large lid opening makes them easy to clean by hand. All ports seal with gaskets and the vessel can be fully sealed for long-term storage. Includes a spigot and airlock. Approximate Dimensions: 15.75in Diameter x 24in Height (w/out airlock in place). Note: The maximum temperature that these plastic fermenters can handle is 140F.

Read more less

Sorry, due to the size of this item, it is only available to purchase in-store or for in-store pickup. Made of food grade plastic, this 12 gallon wine primary fermenter is great for grapes and will hold around 75 lbs of must.  Dimensions: 21” tall x 15” wide at top tapering to 12.5 at bottom. Note: Lid is optional. The optional lid is not meant to seal airtight.  

Read more less

This plastic opener features two handles too quickly and easily remove the lid for the FerMonster carboy. This opener will work with both the 6 and 7 gallon versions of the FerMonster.

Read more less

This lid has a removable rubber gasket to seal your bucket airtight.  Ideal for fermentation, transportation, and storage. Once the lid is attached to a bucket, the tear strip will need to be removed to open the bucket back up.

Read more less

Speidel fermenters are safer than glass carboys, easier to keep clean that plastic carboys, and easier to transfer contents that either.  These fermenters are made out of HDPE and are extremely durable.Key Features: 5.3 gallons, 20 liters Heavy duty HDPE construction is durable and resists oxygen transfer. Built-in handles make these tanks easy to move, even when full. Large lid opening makes them easy to clean by hand. All ports seal with gaskets and the vessel can be fully sealed for long-term storage. Includes a spigot and airlock. Approximate Dimensions: 12 in. Diameter x 16.5 in. Height (w/out airlock in place). Mouth is 4.75 in. wide.  Note: The maximum temperature that these plastic fermenters can handle is 140F.

Read more less

Special Order Item. Allow more time for processing. Made from durable HDPE plastic, Speidel fermenters are safer and easier to clean than glass carboys. They feature built-in handles, large lid openings, a spigot and an airlock, and all ports are sealed with gaskets.  Approximate dimensions are 20" in diameter and 33" in height w/o the airlock in place. Maximum temperature is 140°F.    

Read more less

Lid for the 12 gallon wine primary fermenter. Please note that this lid is not meant to seal airtight.  

Read more less

Replacement lid gasket for the 60L and 120L Speidel fermenters.

Read more less

O-Ring for FerMonster Lid 

Read more less

Lid for the 25 gallon wine primary fermenter. Please note that this lid is not meant to seal airtight.  

Read more less

Solid lid for the 6 and 7 gallon FerMonster carboys.

Read more less