Pumps

The Super Sucker transfer pump is the perfect solution to moving beer or wine between vessels without the hassle of starting a siphon or positioning carboys and kegs to use gravity. Eliminates excess oxygen exposure that results from hand-pumping a siphon or blowing into a carboy hood. Use 3/8" ID tubing to hook up the Super Sucker to a racking cane and run a length from the outlet to the receiving vessel. The pump is self-priming and features a convenient on/off switch in-line on the power cord. Features: Self-Priming 10 mm Barbed Inlet/Outlet On/Off Switch Max Flow: 1.12 Gal/min Suction: 5 in. Max Lift: 150 in. (12.5 ft.) Maximum Temperature: 140°F Pressure: 90 psi Voltage: 12V DC (3.5A)  

Read more less

A compact submersible pump for small cooling projects or building a DYI bucket carboy/keg cleaning system. Specifications: Maximum flow rate: 800 GPH Max lift height: 9 ft. Comes with 2 barb fittings - 1/2" & 3/4"  High quality 60W motor runs quiet Stainless steel impeller shaft 6 ft. long power cord For cooling, recommended for batch sizes less than 10 gallons.

Read more less

It's time to go with the (higher) Flow. With features like an Air Relief Valve (ARV), 6-vane impeller design, stainless steel precision machined casting and an integrated impeller shaft and thrust bearing, the Flow is the newest and most badass pump to hit the market. Higher Pressure & Flow-What's more important? Moving your wort quickly or a powerful CIP? The Spike Flow is leading at both. No compromises here.  Air Relief Valve-Air in your lines creating headaches? The Flow features an ARV bleed system. Problem solved.  Clog Proof Impeller-With the built-in chopping tines on the impeller, you'll never have to stop mid-Brew Day because of a clogged pump head.  Quietest on the Market-The Flow is for brewers who prefer listening to their brewing playlist or the game on TV rather than a loud pump.  Specs:  • Best-in-class 9GPM (gallons/minute) flow rate• Best-in-class 9.5 PSI of pressure • Air Relief Valve (ARV) makes priming easy and convenient• Built in 1/2" drain barb• 6-vane impeller design optimized for performance and durability• 304 stainless steel precision machined casting with maximized inlet and outlet ports• Integrated chopping tines to prevent clogging• Black anodized motor shell and shot-blasted housing• Easy disassembly, cleaning and reassembly• Ultra-quiet, fan enclosed motor: 120v, 60 Hz • 6 foot power cord • 9" length x 5" width x 7" height • Continuous use rated Available in NPT fittings or TC fittings

Read more less

The Vintage Shop Super Transfer Pump is quick, compact and portable.It is easy to install anywhere, since it comes with mountable shock-absorbing feet.This self-priming unit is specially designed to save you time. You can transfer a 5-gallon carboy in approximately 1.5 minutes. It flows at a rate between 1 to 3 GPM (gallons per minute). Has an on/off switch with variable flow adjustment dial and a 5' electrical cord. Comes with a quick disconnect pre-filter to prevent clogging of the pump head. Comes with hoses, clamps, fittings and a spanner wrench. BPA Free Packaged pump total weight: 3.5 Kg (7.7 Lbs).Pump Specifications: Flow rate from 1 to 3 gallons per minute. Motor type AC. 110 Volts, 0.5 Amp, 60 Hz.

Read more less

A compact submersible pump for small cooling projects or building a DYI bucket carboy/keg cleaning system.       Specifications: Maximum flow rate: 1300 GPH Max lift height: 10 ft. Comes with 2 barb fittings - 1/2" & 3/4"  High quality 100W motor runs quiet Stainless steel impeller shaft 6 ft. long power cord For cooling, recommended for batch sizes between 10 gallons to 2 bbl

Read more less

Replacement parts for the FloJet pump which is included with the Buon Vino Mini-Jet and Super-Jet filters.A complete kit to replace the diaphragm on this pump. Kit includes replacement Diaphragm, Springs & Poppets for the installation.

Read more less

A Stainless Steel pump housing is food-grade and nearly indestructible. Stainless steel is the material of choice for professional breweries because it is a durable, food-grade metal that can withstand caustic chemicals and can also be effectively sanitized. This housing has a 3/4" mpt for the center inlet and a 1/2" mpt outlet.The magnetic drive acts as a clutch allowing the user to put back-pressure on the pump to slow down flow. With a ball valve on the outflow, you can slow flow all the way to nothing. Since it is a magnetic drive, it is not self priming, you must put the pump under the level of the liquid source. This pump has an installed bracket to allow mounting. This is a tough little pump with a 1/25 hp, continuous-duty 1.4 Amp motor which can be run non-stop for extended periods. This pump has a maximum flow of 7.2 GPM with a maximum head of 12 feet. For an example of typical usage: with a head of 6' it will pump 3.25 GPM and with an 8' head it will pump 2.5 GPM.Motor requires 115v 50/60HZ power requirements. 3/4" mpt center inlet 1/2" mpt outlet 7.2 gpm maximum flow 12 foot maximum head 115V 50/60HZ power requirement. 6 foot power cord 250 Fahrenheit or 121 Celsius max liquid temperature

Read more less