Keg Repair

47 products


  • O-Ring Kit for Corny Kegs

    O-Ring Kit for Corny Kegs

    18 in stock

    Includes O rings for dip tubes, posts, and lid.

    18 in stock

    $4.00

  • Keg Lube

    Keg Lube

    15 in stock

    Keg lube is a food grade lubricant for rubber and plastic parts. Using keg lube will extend the life of the o-rings on your kegs preventing cracks from developing and leaks from occurring. 1 ounce tube.

    15 in stock

    $3.99

  • Universal Poppet

    Universal Poppet

    39 in stock

    Universal poppet valve fits most kegs.

    39 in stock

    $3.99

  • O-Ring - Keg Post

    O-Ring - Keg Post

    168 in stock

    Replacement o-ring for Cornelius keg post.

    168 in stock

    $0.50

  • Floating Dip Tube

    Floating Dip Tube

    5 in stock

    When using the Torpedo Buoy™ floating dip tube, you can draw the clearest beer possible from the first pint to the last. Included is a 3" metal dip tube, 23.5" length of 1/4" ID silicone tubing, and stainless steel ball float. This floating dip tube is compatible with any ball lock or pin lock homebrew keg. Sized for 5-gallon kegs, but it can be shortened for use with 1.5 or 2.5-gallon kegs. Instructions

    5 in stock

    $17.99

  • Cornelius Keg Lid O-ring

    Cornelius Keg Lid O-ring

    12 in stock

    Replacement o-ring for Cornelius keg lids.

    12 in stock

    $2.99

  • O-Ring - Dip Tubes

    O-Ring - Dip Tubes

    294 in stock

    Replacement o-ring for Cornelius keg dip tubes.

    294 in stock

    $0.50 - $3.99

  • Ball Lock Body Connect Gas-In (New)

    Ball Lock Body Connect Gas-In (New)

    5 in stock

    Replacement corny keg post where the gas-in ball lock coupler is fitted onto.  Includes one o-ring and an universal poppet. 19/32" - 18 pitch thread Fits Cornelius Spartan, Super Champion, and Torpedo kegs.  Use a 11/16" deep socket to install

    5 in stock

    $13.99

  • Manual Relief Valve

    Manual Relief Valve

    7 in stock

    For A.E.B. & Cornelius ball lock tanks

    7 in stock

    $8.95

  • Ball Lock Body Connect - Beverage Out (New)

    Ball Lock Body Connect - Beverage Out (New)

    8 in stock

    Replacement corny keg post where the liquid-out ball lock coupler is fitted onto.  Includes one o-ring and an universal poppet. 19/32" - 18 pitch thread Fits Cornelius Spartan, Super Champion, and Torpedo kegs.  Use a 11/16" deep socket to install

    8 in stock

    $13.99

  • Universal Keg Post O-Rings - 10 Pack Universal Keg Post O-Rings - 10 Pack

    Universal Keg Post O-Rings - 10 Pack

    54 in stock

    Replacement o-rings for ball lock or pin lock keg posts (body connects). 10 Pack

    54 in stock

    $3.99

  • Cornelius Keg Lid, New

    Cornelius Keg Lid, New

    2 in stock

    A replacement lid for Cornelius (Corny) and Firestone kegs. Pressure relief valve included. Includes pressure relief valve and lid o-ring (not pictured).

    2 in stock

    $19.99

  • O-Ring - Keg Post - Red

    O-Ring - Keg Post - Red

    49 in stock

    Replacement o-ring for Cornelius keg post.

    49 in stock

    $0.50 - $3.99

  • Ball Lock Post Bulkhead - Gas In

    Ball Lock Post Bulkhead - Gas In

    6 in stock

    This gas in ball lock post bulkhead assembly allows you to add a ball lock post just about anywhere. Create your own pressure vessel or attach it to an aluminum gas manifolds for a quick connect option. 1/4" BSP threads and locking nut.

    6 in stock

    $11.99

  • Floating Dip Tube Filter Attachment Floating Dip Tube Filter Attachment

    Floating Dip Tube Filter Attachment

    10 in stock

    This really handy little filter can be used with the Torpedo Keg Buoy or the floating dip tubes included with the Kegmenter and FermZilla Pressure Kit to prevent hops or other solids from getting sucked into the dip tube itself. The 304 stainless 80 mesh is fine enough to filter out hops and many other solids but not so fine that it gets blocked up easily. If you have a FermZilla or stainless Kegmenter this add is a must. Made from HDPE and 304 Grade stainless steel, this product can be boiled or sanitized in the full range of cleaners that we sell. The plastic HDPE is over molded onto the stainless mesh to make a seamless finish. The end cap can easily pop off for cleaning.

    10 in stock

    $3.99

  • 6pk - O-ring for Universal Poppet

    6pk - O-ring for Universal Poppet

    41 in stock

    Universal poppet valve fits most kegs.

    41 in stock

    $3.99

  • O-Ring - Keg Post - Green

    O-Ring - Keg Post - Green

    61 in stock

    Replacement o-ring for Cornelius keg post.

    61 in stock

    $0.50 - $3.99

  • Pin Lock Conversion Body Connect - Beverage Out

    Pin Lock Conversion Body Connect - Beverage Out

    9 in stock

    Convert a pin lock beverage out post over to a ball lock. Includes o-ring (not pictured) Does not include poppet valve

    9 in stock

    $7.50

  • Dip Tube - Gas In (S/S)

    Dip Tube - Gas In (S/S)

    2 in stock

    Replacement gas in stainless steel dip tube for Corny style kegs.

    2 in stock

    $4.99

  • O-Ring - Keg Post - Yellow

    O-Ring - Keg Post - Yellow

    104 in stock

    Replacement o-ring for Cornelius keg post.

    104 in stock

    $0.50 - $3.99

  • Pin Lock Conversion Body Connect - Gas In

    Pin Lock Conversion Body Connect - Gas In

    11 in stock

    Convert a pin lock gas in post over to a ball lock. Includes o-ring (not pictured) Does not include poppet valve

    11 in stock

    $7.50

  • Carbonation Keg Lid

    Carbonation Keg Lid

    4 in stock

    A corny keg lid with an extra gas post which connects to a .5 micron stone.  Simply connect your gas quick disconnect to the included fitting on the lid and allow carbonation to begin. How to use this product:Beer must be stored cold 34–40°F1. Preboil the stone for 2–3 minutes before using. This assures you that your stone is sterile and any residual oils have been boiled off.2. Sanitize the whole keg lid before submersing into your keg filled with beer.3. Set your PSI on your regulator to 3–4psi and attach your gas in fitting to the body connect on the lid. Leave keg at this pressure for 1 hour.4. Raise your pressure 2PSI per hour until you reach 10–12psi. Leave it at 10–12psi for 24 hours. Pour a pint and test the carbonation. If you think your beer needs more CO2 leave for another 4–6 hours and have another pint.5. Remove carbonation lid after carbonation level is satisfactory. Return original keg lid for long term storage.

    4 in stock

    $59.99

  • Ball Lock Post Bulkhead - Beverage Out

    Ball Lock Post Bulkhead - Beverage Out

    8 in stock

    This beverage out ball lock post bulkhead assembly allows you to add a ball lock post just about anywhere. Use in conjunction with the gas in bulkhead to create your own pressure vessel. The included short dip tube can be replaced with a longer dip suitable to your needs. 1/4" BSP threads and locking nut.

    8 in stock

    $11.99

  • Petrol-Gel® Sanitary Food Grade Lubricant

    Petrol-Gel® Sanitary Food Grade Lubricant

    4 in stock

    Lubricates & protects o-rings & other kegging equipment Petrol-Gel is the purest of lubricants, made with an odorless, tasteless, high viscosity index paraffinic base oil. Petrol-Gel is compounded with appropriate food grade additives to meet the performance demands for all recommended applications. Authorized by USDA as a lubricant for use where there is incidental contact with food. Use on valves, pistons, pumps, O-rings, guides, slide mechanisms, & more. Tasteless & odorless Will not taint beer USDA Rated H-1 FDA Approved Impervious to water Operating Temp 0 - 185F High melting point 195F Technical white grease Valves, pistons, pumps, O-rings, guides, slide mechanisms, & more. 4 ounce tube

    4 in stock

    $7.99

  • Plastic Boot, Corny Lid Boot

    Plastic Boot, Corny Lid Boot

    22 in stock

    For Cornelius manufactured tanks.

    22 in stock

    $1.00

  • Corny Keg Lid with Tab

    Corny Keg Lid with Tab

    3 in stock

    A replacement lid for Cornelius (Corny) kegs.  This lid has a tab welded on the inside for hanging mesh bags of dry hops, oak, or other additives. Pressure relief valve and lid o-ring included.

    3 in stock

    $24.99

  • Poppet Valve, Becker

    Poppet Valve, Becker

    2 in stock

    This poppet valve will fit most Cornelius kegs.

    2 in stock

    $4.50

  • Beverage Out Dip Tube, Ball Lock Kegs

    Beverage Out Dip Tube, Ball Lock Kegs

    3 in stock

    Curved beverage (liquid) out curved dip tube for 5 gallon Cornelius style ball lock kegs. Stainless Steel.  

    3 in stock

    $16.99

  • O-Ring - Keg Post - Blue

    O-Ring - Keg Post - Blue

    132 in stock

    Replacement o-ring for Cornelius keg post.

    132 in stock

    $0.50 - $3.99

  • 857c41bc36ba2d1be4e16d321e3f15b7%2FSanke Valve Spear Removal Tool.jpg

    Sanke Valve/Spear Removal Tool

    1 in stock

    This tool is for removing the valve and spear on American Sanke kegs. This tool will push the spear down, it does not remove the ring.

    1 in stock

    $94.99

  • Low2 Cornelius Keg Lid O-ring | Superior Oxygen Barrier Properties

    Low2 Cornelius Keg Lid O-ring | Superior Oxygen Barrier Properties

    25 in stock

    96% reduction in oxygen ingress compared to silicone O-rings when measured in a keg! Made from a special blend of materials, these gaskets offer vastly improved oxygen barrier properties compared to Silicone or EPDM Give your beverage the absolute best protection from oxygen staling with KegLand's Low2 O-rings! The result is your beverage staying fresher for longer! Compatible with any ball lock or pin lock corny-style keg with standard lid Upgrade the storage life of your beer by replacing your standard keg lid O-ring with the new Low2 O-ring from KegLand. Even the most perfectly sealed keg is susceptible to oxygen ingress through the hatch O-ring—yes, even if the keg is under constant pressure with CO2! Even a leak-free, pressurized keg will release CO2 molecules as they pass through the lid O-ring itself, and conversely, Oxygen molecules will permeate through the O-ring and diffuse into the keg when they reach the surface area on the other side. The level of permeability is wide ranging and highly dependent on what material the O-ring is made from. Rather than the usual EPDM or Silicone, Low2 gaskets are made from a unique composition of Synthetic M-Class and Cross-Link Elastomers. This special blend has superior oxygen barrier properties that results in your beverage staying fresher for longer.

    25 in stock

    $3.99

  • Replacement PRV (35 psi)

    Replacement PRV (35 psi)

    4 in stock

    Replacement pressure relief valve rated to blow at 35 psi. This is a direct replacement of the PRV featured on the FermZilla and Kegmenter. It is also compatible with homebrew kegs and the KOMOS® CO2 regulator if you desire a lower blowoff pressure.

    4 in stock

    $6.99

  • Sankey D & S System Spear removing / Opening Demounting Tool

    Sankey D & S System Spear removing / Opening Demounting Tool

    19 in stock

    Sankey D and S System Spear removing / Opening Demounting Tool​ Stainless steel commercial keg opening tool. Suitable only for D and S system kegs also called American and European Sankey kegs respectively. Use this Keg spear demounting tool​ for cleaning and servicing. Spanner tool to remove the spear from a D-TYPE or S-TYPE keg Sturdy tool with a long rod for easy handling Always degas before proceeding to remove keg valve.

    19 in stock

    $39.99

  • Replacement PRV (100 psi)

    Replacement PRV (100 psi)

    8 in stock

    The most common relief valve. Fits most Cornelius and Firestone style kegs. Long body with spring with gray top and pull ring. Max. pressure rating: 100 psi

    8 in stock

    $7.99

  • Straight Beverage Out Dip Tube

    Straight Beverage Out Dip Tube

    1 in stock

    Replacemnet straight beverage (liquid) out dip tube for Firestone and Cornelius kegs. Stainless Steel Approximately 23" in length.

    1 in stock

    $22.99

  • Replacement PRV (65 psi)

    Replacement PRV (65 psi)

    7 in stock

    Replacement pressure relief valve rated to blow at 65 psi. This is a direct replacement of the PRV featured on the KOMOS® CO2 regulator. The Green PRV can also be used with pressurizable FermZilla models for hydro testing. Note that under normal operation, the FermZilla should always be used with the Red PRV (35psi).

    7 in stock

    $6.49

Keg Repair
Footer image

© 2024 Home Fermenter®, Powered by Shopify

    • American Express
    • Apple Pay
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account