Draft Supplies - Main
3/16" ID Vinyl Draft Tubing
3/16" ID vinyl beverage and gas tubing. Accuflex Bevlex 200 PVC Tubing is used for draft beer transfer and BIB soft drink applications. Its special dual durometer construction combines a low extraction inner contact surface with a flexible outer layer to provide excellent kink resistance and taste protection. NSF-51 Listed. Inside Diameter (ID): 3/16" Outside Diameter (OD): 7/16" Clamp Size: 13.3mm Available in clear or black, by the foot or 100' roll. Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.
$1.20 - $79.99
Hose Gear Clamp - Fits 1/4'' to 5/8'' OD Tubing
Stainless steel hose clamp for 1/4" to 5/8" OD tubing. Commonly used with 3/16" ID and 5/16" ID draft tubing.
$1.30
5/16" ID Vinyl Draft Line Tubing
5/16" ID red or clear vinyl beverage and gas tubing. The red color is generally used for gas line. Accuflex Bevlex 200 PVC Tubing is used for draft beer transfer and BIB soft drink applications. Its special dual durometer construction combines a low extraction inner contact surface with a flexible outer layer to provide excellent kink resistance and taste protection. NSF-51 Listed. Inside Diameter (ID): 5/16" Outside Diameter (OD): 9/16" Clamp Size: 15.7mm or 17mm Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.
$1.20 - $98.00
Hex Nut Washer
Flat neoprene washer for use with beer shanks or Sanke couplers. Pairs up with a tailpiece and hex nut (or wing nut).
$0.75 - $6.49
Flare Swivel Nut & 5/16" Swivel Stem
Swivel nut and stem set. Used to attach 5/16" ID draft or CO2 line to corny keg disconnects. Barb Specifications: Material: Stainless Steel Size: 5/16" Nut Specifications: Material: Brass Finish: Chrome Plated Brass Size: 1/4"
$2.99
Flare Swivel Nut with 1/4'' Stem
Swivel nut and stem set. Used to attach 3/16" ID or 1/4" ID draft line to corny keg disconnects. Barb Specifications: Material: Stainless Steel Size: 1/4" Nut Specifications: Material: Brass Finish: Chrome Plated Brass Size: 1/4"
$2.99
Hex Nut for Tailpiece
Nickel Plated Brass Hex Nut, 1" (Beer Thread, 29/32-14). Used to connect a tailpiece to a sanke coupler or a shank. You may also need a tailpiece or hex nut washer. California Proposition 65 Warning: This product may contain a chemical known to the State of California to cause cancer, or birth defects, or other reproductive harm.
$1.99
Beer Line Assembly - Ball Lock to Hand Held Faucet
Beer line assembly for your corny keg hook up. We build the assembly, you just need to secure the the ball lock disconnect to your corny keg. For outdoor dispensing we recommend selecting the black vinyl tubing. This assembly includes: 5' of 3/16"" ID vinyl draft tubing CMB Liquid ball lock disconnect with 1/4" flare fitting 1/4" swivel nut with 1/4" stainless steel hose barb stem 13.3 stepless hose clamp Plastic hand held faucet
$21.99
Duotight 8 mm (5/16 in.) x 1/4 in. Flare
This Duotight fitting with 1/4" Flare is perfect for flared gas and beverage ball lock and pin lock disconnects. This Duotight fitting is compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Note: Ball lock fitting and regulator not included.
$4.29
Ball Lock Gas Line Assembly
Gas line assembly for your corny keg hook up. We build the assembly, you just need to secure the open end of the tubing to the 5/16" barb on your regulator with the gear hose clamp and the ball lock disconnect to your corny keg. This assembly includes: 4' of 5/16" ID red vinyl tubing Gas ball lock disconnect with 1/4" flare fitting 1/4" swivel nut with 5/16" stainless steel hose barb stem 15.7 stepless hose clamp Stainless steel gear hose clamp
$16.99
13.3mm Stepless Hose Clamp - For 3/16" ID Vinyl or 3/8" ID Poly
13.3mm Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines. For 3/16" ID Vinyl or 3/8" ID Poly Hose Stepless Clamp Tool sold separately.
$0.75 - $12.99
Multi Draft Tool with Duotight Remover
The KOMOS multi draft tool is a handy and inexpensive tool that every homebrew kegger should have in their toolbox. It's really useful for the most common fittings that you are likely to see in a home draft system, and Duotight users will appreciate the handy removal tool for 8 mm and 9.5 mm fittings. Functions: CO2 Regulator Nut Spanner Shank Hex Nut Spanner Faucet Coupling Ring Pin Wrench Flare Swivel Nut Spanner 8 mm Duotight Removal 9.5 mm Duotight Removal Bottle Opener
$4.99
EVABarrier Double Wall Draft Tubing - 4 mm ID x 8 mm OD
EVABarrier double wall tubing is an excellent choice for all draft dispensing applications. The inner barrier is an excellent gas barrier, keeping oxygen out and CO2 in. The inner wall is also extremely smooth to prevent bacteria and other microbes from attaching to the inside surface. The outer barrier gives the tubing a decent stiffness while still remaining pliable. This makes EVA Barrier remarkably kink resistant and the perfect choice for use with Duotight, John Guest, and other push-in fittings. The 4 mm (5/32") ID size is perfect for home draft applications where only a short beverage line is needed. It is recommended to use 5-6 ft. per line for adequate flow resistance. Specifications: Inner Diameter - 4 mm (5/32") Outer Diameter - 8 mm (5/16") PVC, BPA , and Plasticizer Free* Outer wall prevents oxidation and CO2 loss Smooth inner wall prevents microbial growth build-up *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects.
$5.49 - $47.29
Faucet Spanner Wrench - Red Handle
A faucet spanner wrench is a must have tool for all kegerator owners. This wrench with the red coated handle is gentler on the hands when using.
$5.99
3/16" Stainless Steel Tailpiece (304)
3/16" ID stainless steel tailpiece commonly used for 3/16" ID draft tubing. 304 Stainless Steel
$3.49
15.7mm Stepless Hose Clamp - For 5/16" ID Vinyl
15.7mm Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines. For 5/16" ID Vinyl Tubing Stepless Clamp Tool sold separately.
$0.75 - $12.99
Plastic Carbonation and Line Cleaning Cap
This plastic ball lock cap features soda bottle threads, allowing you to convert a soda bottle into a pressurized growler. It is compatible with both gas and liquid ball lock disconnects. Also works well for cleaning draft lines. Simply add line cleaning solution to a soda bottle, attach it to the draft line, and open the faucet to push solution through. When using two ball lock caps, it is recommend pairing this yellow plastic cap with a red plastic cap so you can easily identify which caps are being used for liquid or gas. This cap can also be attached to the FermZilla collection container, enabling you to purge the collection container of oxygen. Specifications: Liquid and Gas Ball Lock Compatible Overall Length - 2.5" Barb Length - 7/8" Barb OD - 1/4" Barb ID - 3/16" 28 mm PCO 1881 Threads
$7.99
12.8mm Stepless Hose Clamp - 7/16 in. OD Tubing
Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines. 12.8mm for 7/16" OD Tubing. (10.5-12.5mm OD) This will fit our 3/16" ID clear/black draft tubing. Stepless Clamp Tool sold separately.
$0.50 - $5.99
Duotight 8mm (5/16) x 5/8 Female Beer Thread
This Duotight to Female Beer Thread fitting can be used to connect beverage line to faucet shanks instead of a tailpiece, and it's also a convenient option for connecting gas and beverage line to the gas in and bev out on keg couplers. Compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$4.29
Butterfly Screw Clamp for 7/16'' ID Tubing
Butterfly screw clamps are a time-saving product. Forget about using screw drivers or other tools to tighten these clamps, all you need is your hands. This size is appropriate for the 9/16" hose. 10 mm (0.39") is the minimum opening and 16 mm (0.62") is the maximum. Band and Housing are AISI #430 stainless steel. Band width is 9mm (0.39") Orange plastic handle
$1.70
EVABarrier Double Wall Draft Tubing - 5 mm ID x 8 mm OD
EVABarrier double wall tubing is an excellent choice for all draft dispensing applications. The inner barrier is an excellent gas barrier, keeping oxygen out and CO2 in. The inner wall is also extremely smooth to prevent bacteria and other microbes from attaching to the inside surface. The outer barrier gives the tubing a decent stiffness while still remaining pliable. This makes EVA Barrier remarkably kink resistant and the perfect choice for use with Duotight, John Guest, and other push-in fittings. The 5 mm (13/64") ID size is perfect for draft applications where a longer beverage line is needed. It is recommended to use 10-12 ft. per line for adequate flow resistance. Specifications: Inner Diameter - 5 mm (13/64") Outer Diameter - 8 mm (5/16") PVC, BPA , and Plasticizer Free* Outer wall prevents oxidation and CO2 loss Smooth inner wall prevents microbial growth build-up *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects.
$7.99 - $19.99
Butterfly Screw Clamp for 3/8'' ID Tubing
Butterfly screw clamps are a time-saving product. Forget about using screw drivers or other tools to tighten these clamps, all you need is your hands. This size is appropriate for the 3/8" ID tubing. 8 mm (0.31") is the minimum opening and 12 mm (0.47") is the maximum. Band and Housing are AISI #430 stainless steel. Band width is 9mm (0.39") Blue plastic handle
$1.40
Butterfly Screw Clamp for 1/2" ID Tubing
Butterfly screw clamps are a time-saving product. Forget about using screw drivers or other tools to tighten these clamps, all you need is your hands. This size is appropriate for the 1/2" ID tubing. 12 mm (0.47") is the minimum opening and 20 mm (0.78") is the maximum. Band and Housing are AISI #430 stainless steel. Band width is 9mm (0.39") Green plastic handle
$1.85
1/4" ID Vinyl Draft Line Tubing
1/4" ID clear vinyl beverage and gas tubing. Accuflex Bevlex 200 PVC Tubing is used for draft beer transfer and BIB soft drink applications. Its special dual durometer construction combines a low extraction inner contact surface with a flexible outer layer to provide excellent kink resistance and taste protection. NSF-51 Listed. Inside Diameter (ID): 1/4" Outside Diameter (OD): 1/2" Clamp Size: 14.5mm Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.
$1.35 - $86.99
Duotight - 6.5 mm (1/4 in.) x 8 mm (5/16 in.) Reducer
Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$2.49
14.5mm Stepless Hose Clamp - 1/2in. OD Tubing
Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines. 14.5mm for 1/2" OD Tubing. (12-14mm OD) Stepless Clamp Tool sold separately.
$0.50 - $5.99
Hose Gear Clamp - Fits 5/16'' to 7/8'' OD Tubing
Clean, smooth edges-durable and strong. Made from 300 series stainless steel.
$1.60
Draft Line Cleaning Kit with Hand Pump
Avoid off flavors in your dispensed beverages by cleaning your kegerator lines regularly. The included metal pump makes it easy to push the cleaning liquid through the draft lines. This kit includes the following: 1 liter draft cleaning bottle 4" metal pump Single sided faucet/coupler brush Faucet wrench Note: This kit does not include the beer line cleaning detergent unless selected. Need additional Beer Line Cleaner? Warnings: Important information – Prop. 65 for CA residents. Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
$45.99 - $59.99
Duotight 8 mm (5/16 in.) Check Valve
This Duotight check valve is a great idea for protecting your regulator. It has a low opening pressure of 1 psi, and since it cannot be opened or taken apart, it is recommended for gas applications only. The internal components are made from stainless steel. Compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$4.49
Flare Swivel Nut & Swivel Stem (3/16" OD)
Swivel nut and barb for connecting 1/8" ID tubing to a 1/4" flare fitting. Barb Specifications: Material: Stainless Steel Size: 3/16" OD Nut Specifications: Material: Brass Finish: Chrome Plated Brass Size: 1/4" Flare
$2.25
Beer Line Assembly, Ball Lock to Hex Nut
This ball lock to hex nut beer draft beer line assembly will connect a corny keg liquid post to a faucet shank. Includes: 5' of 3/16 ID clear vinyl draft tubing 1 x CMB liquid out corny keg connector, 1/4 mfl 1 x 1/4" swivel stem (stainless steel) with nut (chrome plated) 1 x 304 stainless steel tailpiece 1 x hex nut (chrome plated brass) 1 x hex nut washer 2 x 13.3 stepless oetiker clamp
$23.99
5/16'' Gas Hose Barbed Tee, Chrome Plated
Chrome plated Brass splicer tee has a 5/16″ bore. So use with 5/16 in. ID inlet and outlet hoses. Barbed Hose splicer Tee for gas in beer dispensing Brass with chrome plating. Tee fittings turn it to a 3-way system. Use with 5/16″ ID hoses.
$4.75
16.5mm Stepless Hose Clamp - 5/8 in. OD Tubing
Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines. 16.5mm for 5/8" OD Tubing. (14-16mm OD) This will fit our 5/16" ID clear/red draft tubing that is commonly used for gas/co2 line. Stepless Clamp Tool sold separately.
$0.50 - $5.99
Clamp Crimper
Standard clamp crimper for stepless style clamps with anti-slip rubberized grip. Material: Fully Hardened Steel 9" in length
$9.99
Stainless Carbonation and Line Cleaning Cap
This stainless steel ball lock cap features soda bottle threads, allowing you to convert a soda bottle into a pressurized growler. It is compatible with both gas and liquid ball lock disconnects. Also works well for cleaning draft lines. Simply add line cleaning solution to a soda bottle, attach it to the draft line, and open the faucet to push solution through. This is a direct replacement to ball lock fittings included with the FermZilla pressure kit. It can also be attached to the FermZilla collection container, enabling you to purge the collection container of oxygen. 28mm PCO 1881 Threads
$13.99
3/8" Vinyl Draft Line Tubing
3/8" ID clear vinyl beverage and gas tubing. Accuflex Bevlex 200 PVC Tubing is used for draft beer transfer and BIB soft drink applications. Its special dual durometer construction combines a low extraction inner contact surface with a flexible outer layer to provide excellent kink resistance and taste protection. NSF-51 Listed. Inside Diameter (ID): 3/8" Outside Diameter (OD): 5/8" Clamp Size: 18.5mm Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.
$1.80 - $110.00
