Brewing Equipment

Pairs well with the Grainfather G40, S40, or G30 Brewing Systems  The Grainfather Sparge Water Heater is a temperature-controlled unit that allows you to heat up to 6.6 gallons (25 L) of water making the brewing process even easier by having the right amount of sparge water heated to the right temperature ready at the time of sparge. Start heating your sparge water when you begin the mash to ensure it is ready for when you need to sparge. Once water is at required temperature, it will hold that temperature until changed or turned off. Also comes with a sight glass, tap and heating lights.  Actual capacity from bottom to MAX level is 6.6 gal 25 liters (+/-0.5L). 110-120V~, 60Hz, 1500W (USA) Single wall 304 ss material, brushed finish One piece structure for easy cleaning 304 stainless steel lid with twisted lock for safety Cool touch and robust lid handle and urn handles Water gauge indication and stainless steel ball valve water tap Two overheat protection Concealed heating element Control lights: heating and keep warm ON/OFF switch Maintenance base With 45-110°C variable thermostat Warranty: 2 years

Read more less

The Inkbird WiFi Sous Vide precision cooker will help you cook professional-quality meals. Simply pair it with the Inkbird Smart app to manage your cooking from anywhere within your home WiFi network. Water circulation and 1000-watt power will heat water quickly. Clip onto any pot. Suitable for vegetables, meat, fruit, cheese, eggs and much more. Choose recipes from the app on your phone or on the cooker's LCD screen. No other equipment needed. Put the precision cooker on any pot with water and drop in your desired food in a sealed bag or glass jar. Simply set the time and temp on the cooker or on the companion app. The sous vide cooker works quietly as it cooks. The cooker will stop working and alert you when the water level is lower than the minimum value or when the temp reaches the target setting value. The stainless steel portion is easy to clean after use. Please note that the product is not waterproof. Do not submerge past the max line. Specifications: 120V / 60hz Heating Power: 1000W Temp Control Range: 77-210°F Directional Pump: 360-degree heating WiFi: 2.4 Ghz 802.11n LCD Display  

Read more less

All pumps are not equal! The Spike Brewing engineers tested over 15 pumps during the development of this project and found almost all small submersible pumps on the market are grossly overrated. This can greatly affect your temperature control as flow rate is directly proportional to cooling efficiency.   To use: Simply plug our pump into our temp controller Connect your insulated lines to your temp control coil and to the pump outlet Submerse the pump in your cooler (with ice), fridge with cold water reservoir or glycol chiller Start cooling your wort! Specifications: High flow submersible pump 3/8" barbed outlet (connect directly to our insulated tubing) 12v DC powered (much safer than AC submersible pumps) Suction cups to keep pump submerged Detailed TC-100 product guide:Product Guide.pdf

Read more less

Designed to offer a sturdy connection point when using medium-heavy stills or off-center steam condenser units. Simply attach your still with a 2" tri-clamp and gasket. Sized for 35L BrewZillas and DigiBoils. Compatible with the AlcoEngine Copper Pot Still and Copper Reflux Still and the BrewZilla Steam Condenser. KegLand Part Number: KL32629

Read more less

Limited inventory available in store.  Please allow additional time for processing. BrewBuilt's T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. The appetite for tri-clamp fittings continues to grow in the homebrewing market as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day. The base model comes without fittings so you can add whatever tri-clamp accessories best suit your needs. Also available with a Ball Valve or Butterfly Valve hardware pack. These days homebrewers have a lot of strong choices when it comes to their kettle purchase. BrewBuilt has adopted a modern feature set designed to make the brew day easier. Silicone handle and lid grips help prevent burns. Etched internal volume markings make filling the kettle for mash or boil simple. Welded valve and thermometer ports are leak-free and never require maintenance--no more discovering worn gaskets on brew day. Sealed handle rivets are strong and allow the entire kettle to be filled if necessary. And perhaps best of all, it features the signature BrewBuilt notched lid with a silicone plug that allows the lid to be in place while using immersion chillers or an Ultimate Sparge Arm. These kettles are truly designed for brewing.Key Features: Two welded T.C. couplers for a lifetime of leak free use AISI304 Stainless Steel construction for longevity and excellent corrosion resistance Stainless handles and rivets for secure lifting Silicone coated kettle and lid handles for heat protection Lid is designed to conveniently hang from a handle 4 mm Tri-Clad Bottom with Aluminum Core heats quickly and disperses heat evenly to prevent scorching Induction burner compatible 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 1.2:1 height to diameter ratio provides optimal evaporation rate during boiling Industry-First notched lid with silicone plug accommodates an immersion chiller or sparge arm Internally etched volume markers from top to bottom for easy filling BrewBuilt Homebrewing Products: Designed for Brewing, Built to Last. Size Kettle ID (in.) Height (in.) 10 13.78 16.54 15 15.75 18.90 20 17.72 21.26 30 19.69 23.62 50 23.62 28.30 Limited inventory available in store.  Please allow additional time for processing.

Read more less

MaltMuncher 3 Roll Grain Mill Specifications: Comes with 12 lb hopper and crank handle Great for use with a power drill Cold rolled steel rollers sized at 5" long by 1.25" diameter Adjustable rollers at both ends to move the gap from 0" - 0.63" If motorized we recommend 200 rpm 12 TPI knurl to effectively pull grain through the rollers while still leaving the hulls intact to later form an excellent filter during the sparge 12 mm crankshaft Assembly required. Note: For mounting, requires four M6 x 1mm thread screws (not included). If using the maltmuncher bamboo base, the screw length should be 20mm long. 

Read more less

Built to transform steam into liquid during the boil, Spike Brewing's steam condenser lid will enable you to brew inside without worrying about moisture collecting on your walls and ceiling, which can cause mold issues. These lids are not only designed to fit Spike kettles, but will also work with most other kettle brands on the market. From a better boil-off rate to major cost savings and conveniences, you will find many benefits by adding this to your brew setup. Features & Specs: Compared to boiling without a lid, the Steam Condenser Lid has a 50% reduced boil-off rate and results in a ~6% total boil-off. Replaces the need to install a hood for indoor brewing Prevents mold from forming on walls and ceiling Third-party lab tested to show that DMS is completely undetectable (under 25 ppb) after only 30-45 minutes of boiling Discharge water is very hot and can be used for cleaning Compatible with Spike Kettles and the Spike Solo 1.5" tri-clamp port for CIP ball 4" tri-clamp port for hop additions Water usage: 15 gallons/hour for 10g, 15g & 20g lids 25 gallons/hour for 30g &. 50g lids Lid, pump, condenser mister, piping, clamps, gaskets, barbs & caps included with purchase For more information, see Spike Brewing's FAQ. To get started using the lid, see our Steam Condenser Lid Product and Process guides. Note: Limited inventory availability in-store.  Sizes not carried in-store will be drop shipped from the vendor.

Read more less

10 GALLON STAINLESS BREW KETTLE - V4 Spike Brewing has once again re-designed their brew kettle.  They make one of the best brewing kettles available on the market.  It is the thickest kettle on the market, with US welded fittings (no more weldless fittings) at a factory direct price. Kettle Features: 2.5 - 6 gallon batch size 304 (18/8) stainless steel  Sanitary welded coupler design (done at our facility in Milwaukee, WI) 1.2mm thick walls (thickest on the market) 5mm tri-clad bottom (induction capable) Internal volume markings Polished finish 13.8¨ wide by 17.0¨ tall Domed bottom design Bottom coupler 1.5" off the bottom (1 gallon mark) Top coupler 6" off the bottom (4 gallon mark) Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store.  Drop ships from vendor.

Read more less

Limited supply in-store available for pickup. Due to the weight and dimensions of the Grainfather GC4 Glycol Chiller, this item is shipped palletized freight from the vendor to prevent damage from occurring in transit.  Please allow additional time for processing. Control your fermentation temperature accurately every time!Temperature control is one of the most crucial elements for producing a good quality beer. It needs to be regulated and stable throughout the whole fermentation process to ensure the yeast doesn't get stressed and ferments correctly to get the right flavor profile.  With the ability to individually power and control the temperature of up to four Grainfather Conical Fermenters, each with their own fermenting schedules, the Grainfather Glycol Chiller is the perfect addition to ensure craft brewery-like results.  With the addition of the Glycol Chiller, your system is operating at the ultimate level and you are even able to cold crash and lager. The cooling sleeve is located in between the two stainless steel walls of the Conical Fermenter which is then hooked up to the Glycol Chiller. Temperature is dialed into the digital temperature controller and the liquid travels through this sleeve, cooling the stainless steel which in turn cools the beer in the fermenter. The cooling sleeve never comes into contact with the beer, is completely concealed and does not need cleaning or sanitizing - a true innovation for a fermenter on this scale.  Features: Allows you to cold crash 23 L of wort to as low as 4ºC Allows you to cold crash, lager  control fermentation at low temperatures (as low as 4ºC) Cools and powers up to 4 Conical Fermenters at different temperatures and fermenting schedules.  What's Included: Glycol Chiller Wall outlet power cord with plug 2 x brass couplers (with self-sealing hose connections) 2 x 2 m insulated hoses Specs: LED display 1.5 US Gal glycol tank 300 W 110 – 120 V, 60Hz 390W x 450D x 656H Weight: 62 lb 24 Month  Equipment Warranty Glycol not included. Limited availability in store, drop ships from vendor.

Read more less

The Spike Brewing insulated FLEX jacket uses high quality, extra thick, yet flexible neoprene material to insulate your FLEX from the worst ambient conditions like a hot garage or cold basement. Each custom designed, hand stitched (in the USA) jacket is custom tailored to fit the FLEX. This jacket was designed by a former Lululemon designer because if you're going to cover up shiny stainless steel it better look amazing. We think she did the trick!   Specifications: Sewn in the USA (of imported fabric from Japan and China) Reinforced stitching around all ports, legs and handles for extra strength Helps maintain stable fermentation temps regardless of ambient conditions Stops the tank from ‘sweating’ in warm weather Interior Velcro for attaching the optional heater Machine washable Detailed TC-100 product guide:Product Guide.pdf 

Read more less

Spike Brewing's TC100 temp control system will manage both cooling and heating of your Spike Conical. The digital controller's temp probe will feed into the included thermowell on our CF Series Conical. Also included is a specially fitted neoprene jacket which features reinforced port holes to reduce the chance of ripping during install. Last (and maybe the coolest item) is Spike Brewing's special insulated tubing. This almost eliminates tube cooling losses and will prevent your cooling lines from sweating all over your floor! Cooling:When the temp in the conical rises above the set point it will turn on the pump submerged in your cold water reservoir (bucket of ice water, dorm fridge, aquarium or glycol chiller, DIY AC chiller, etc). This will pump cold water/glycol through the temp control coil, which mounts to the lid, cooling your beer until it reaches the controller set point. Heating:When the temp in the conical falls below the controller set point the optional heater will kick on warming the unit up.  Detailed product guide:Product Guide.pdf TC100 Package:-Digital closed loop controller (heating and cooling)-Insulated tubing (more efficient and no more sweaty tubes!-Temp control coil-Neoprene insulated jacket-Submersible pump (pumping cold water through the temp coil)-Temp Coil Quick Connect Fittings TC100 + Heat Package:-TC100 Package (above)-Optional heater (for us northern brewers)    Limited availability in store.  Drop ships from vendor.

Read more less

This heavy-duty pulley is made from strong nylon strapping, laser cut 304 grade stainless steel and is capable of lifting large heavy loads with ease. It's the perfect pulley for lifting the heavy malt pipe from your BrewZilla or other all-in-one system. It's a bit more expensive than other pulley systems, but there's no comparison when it comes to easily lifting or lowering the malt pipe. The included strap is 10m long by 25mm wide (32.8 ft. x 1 in.). The pulley system enables you to multiply your pulling force by 4 times. If you apply 60 lbs of pulling force, the pulley can lift 240 lbs with relative ease. Be sure that the beam you mount the pulley to is rated for the total amount of force being applied i.e. pulling force plus load weight, so for this example 300+ lbs.

Read more less

Easily attach to the Grainfather Conical Fermenter, for a clean and simple way to transfer your beer without the need to lift the fermenter to perform a gravity fed transfer. This also ensures less chance of oxygen entering the beer during transfer. All you need is a C02 bottle and a regulator to attach to the Pressure Transfer and you can transfer your beer into a keg or bottles through the Conical Fermenter Dual Valve Tap or via the top of the fermenter lid using the Beer Racking Pipe. NOTE: Batteries are not included for the Pressure Gauge. 2 x AAA batteries are needed. Specifications: High quality 304 stainless steel components Accurate digital pressure gauge Needle valve for precise control of pressure

Read more less

If you are looking for the easy way to lift your malt pipe from your single vessel BrewZilla or other brewery then this is the easy way to do it. The setup includes all the parts you need. Simply screw the shackle into the roof or overhead beam and then secure the wall cleat and away you go. It will only take a couple moments to install. The double pulley is used so it's possible to lift the large malt pipe in the 65L BrewZilla unit. This stainless steel pulley set has been made from all 304 grade stainless steel, nylon and non-corrosive materials. Suitable for: 35L and 65L BrewZilla or brew in a bag. Contains: 6mm x 8 meters rope 1 x Nylon Wall Cleat 2 x Stainless Pulley 2 x Stainless Carabiner 2 x Stainless Band Rope Anchor

Read more less

The DigiMash is one of the most affordable options in all-grain electric brewing. Includes 35L Gen 2 DigiBoil, false bottom, malt pipe with bottom screen, wire support, and malt pipe handle. This model runs off 110V power and has dual heating elements (1000w and 500w) that can be controlled independently. Includes 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2"). DigiBoil Features: 304 stainless steel construction 9 gallon total capacity Digital temperature control 110V / 15A power and plug (5 ft. cord) Stamped-in volume markers (gallons & liters) Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C Recommended max. grain bill - 18 lbs Recommended min. grain bill - 8 lbs External Dimensions: 29" H x 15" W (including handles) Internal Dimensions: 19.5" H x 11.75" W Mash Upgrade Includes: False bottom Malt pipe Wire support  Malt pipe handle Malt pipe bottom screen

Read more less

The Inkbird PID controller is a convenient, plug-and-play option to control the electric element on your boil kettle, mash tun, hot liquor tank, or still. With a dedicated outlet and power button for your brew pump, you can easily kick the pump on and off to recirculate your mash, transfer wort from vessel to vessel, and whirlpool after the boil. Plug-n-Play Easy Operation: The electric home brewing controller is an all-in-one machine and no more installation is needed. Just plug in and set up the system according to your needs. Precise Control: PID digital controller provides accurate temperature control at the range of -50~125°C / -58~257°F and the accuracy of the temperature is ±0.1°C or ±0.2°F. Independent Pump Function: The Pump Function is specifically designed for homebrewers and it can be operated separately. Just press the “Pump” button to turn it on or off. Safety: The controller with overload protection features a high-quality metal case and aluminum cooling plate. 6.5 ft. power cord with 3-prong plug to ensure the safety of your electrical appliances. Specifications: Power: 120V / 15A / 60Hz / 1800W Sampling period: 0.5 second Control Mode: Auto, Manual, and Manual Inhibit Control Box Dimensions: 2.87" x 6.25" x 6.85"  Independent power receptacles for heating element and pump Built-in GFCI plug Pre-cut wall mount holes

Read more less

Spike Brewing's TC-100 temp control system will manage both cooling and heating of your FLEX. The digital controller's temp probe inserts into the included thermowell that attaches to the secondary port of the FLEX. Also included is a specially fitted neoprene jacket which features reinforced port holes to reduce the chance of ripping during install. Lastly, (and maybe the coolest item) is Spike Brewing's special insulated tubing. This greatly reduces tube cooling losses and will prevent your cooling lines from sweating all over your floor during the dog days of Summer! Cooling:When the temp in the FLEX rises above the set point of the controller, it will turn on the pump submerged in your cold water reservoir (bucket of ice water, aquarium, glycol chiller, DIY AC chiller, etc). This will pump cold water/glycol through the temp control coil, which mounts to the lid, cooling your beer until it reaches the controller set point. Heating:When the temp in the FLEX falls below the controller set point the optional heater will kick on warming the unit up to the desired temp. Detailed product guide:Product Guide.pdf TC-100 Package:-Digital temp controller (manages heating and cooling)-Insulated tubing-Temp control coil-Thermowell-Neoprene Insulated Jacket-Submersible pump-Temp Coil Quick Connect Fittings TC-100 + Heat Package:-TC-100 Package (above)-Optional heater (for us northern brewers)  Limited availability in store.  Drop ships from vendor.

Read more less

Making homemade pizza in your kitchen oven is a tasty and rewarding endeavor, but nothing matches the performance and results you get from a purpose-built pizza oven. Kitchen ovens generally max out around 550°F whereas pizza ovens can reach as high as 1,000 degrees. The ideal way to cook pizza is quickly and at very high temperatures in the 800-900°F range, so if you want to take your homemade pizza game to the next level, a gas-fired pizza oven is the way to go! The HIZO G14 Portable Gas-Fired Pizza Oven is the perfect no-hassle solution to cooking the best homemade pizza outdoors. Heats up to 932°F and cooks a pizza in only 1 to 2 minutes. Propane powered and ready to use straight out of the box with no bolts or tools required for assembly. Complete with dialed control and gas igniter included as standard—no batteries or matches required! Setup and packing away couldn't be easier thanks to the four stable folding legs. Includes: HIZO G14 Pizza Oven Liquid Propane hose and regulator Dual Scale Temperature Gauge: 32°F - 932°F (0°C - 500°C) Ceramic Pizza Stone: 14" x 14" x 3/8" Instructions

Read more less

Speed up heating times with the Heat Exchanger Dish (HED) for Gen 4 BrewZillas. Due to the concave bottom and central draining hole, the wort being recirculated through the pump will pass through the malt pipe and then down through the boiler false bottom. The wort would normally then follow the path of least resistance, making a b-line for that drainage hole. What this Heat Exchanger Dish does is force that recirculating wort up to the edge of the BrewZilla base and pass over the elements for a longer period, this then aids in faster heating exchange with the wort, which can help you on a brew day reach those temperatures much quicker. For use with the Gen 4 65L BrewZilla. It is not compatible with any previous generations of BrewZillas or DigiBoils. The HED has been pressed into a slight concave shape to match the curvature of the boiler false bottom. Includes a longer eye bolt assembly than the one included with the false bottom. NOTE: The order of bolt to washer to nuts goes as follows. Eye bolt, washer, false bottom, washer, nut, HED, then wing nut. This is so that the eye bolt does not come completely removed when and if you clean underneath the Heat Exchanger Dish.

Read more less

These Spike Brewing Spike+ false bottom is for use with their Spike+ line which uses TC fittings. For the standard Spike kettle line that uses NPT fittings please see HERE. Design Features: All stainless design; no Silicone gasket to make a seal Low profile design; extremely low dead space (<.25gal)  Best filtering on the market due to dual stage filter design; 99.9% grain filtering efficiency TC Pickup tube, gasket and clamp are included False bottom and pick up tube are Made in the USA! 2 Stage Filtering: Stage 1: Filters through top plate's optimally engineered sized laser cut slits Stage 2: Bottom ring supports the grain weight while also filtering the wort again before it reaches the pickup tube **False bottoms are not designed to filter pellet hops in the boil kettle. Instead you'll want to create a whirlpool to center the hop material and then drain using a side pickup (HERE)**

Read more less