Faucets & Shanks

Black plastic handheld faucet with a barb for 3/16” or 1/4” ID tubing.  Also known as a cobra tap or picnic tap.

Read more less

Black plastic tap handle for kegerator faucets.

Read more less

In normal rear-sealing faucets the entire faucet has to drain of beer. Intertap faucets are forward-sealing which keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transfering to your beer while you pour.Other 'perl' forward sealing faucets use a floating o-ring, which is just as sanitary but requires the o-ring to move inside the faucet body in order to seal correctly. This can become a problem as the faucet ages. Intertap faucets use a sliding shuttle that guides the o-ring into the perfect position every time. The threaded spout easily unscrews from the faucet and can be replaced by a growler filler or stout spout quickly and easily. Pour a pint and then fill a growler in no time at all.304 Stainless Steel construction.

Read more less

Faucet body gasket Replacement gasket that seals between a draft faucet and shank.

Read more less

Turns an Intertap or Nukatap faucet into a self closing faucet by forcing it to the closed position when you let go of the handle. Made from 304 stainless steel. Faucet not included. This spring is not compatible with the Nukatap flow control faucet or other brands of faucets. For the Nukatap flow control spring, click here

Read more less

In normal rear-sealing faucets the entire faucet has to drain of beer. Intertap faucets are forward-sealing which keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transfering to your beer while you pour.Other 'perl' forward sealing faucets use a floating o-ring, which is just as sanitary but requires the o-ring to move inside the faucet body in order to seal correctly. This can become a problem as the faucet ages. Intertap faucets use a sliding shuttle that guides the o-ring into the perfect position every time. The threaded spout easily unscrews from the faucet and can be replaced by a growler filler or stout spout quickly and easily. Pour a pint and then fill a growler in no time at all.Made of chrome plated brass. Proposition 65 notice: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Read more less

Improve the hygiene of your kegerator faucets with these nylon caps.  

Read more less

The Nukatap beer faucet features a forward sealing design. In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transfering to your beer while you pour. Similar to the Intertap line of faucets, but with improved laminar flow and reduced first pour foam due to its lower thermal mass. The Nukatap is compatible with all Intertap spout accessories. Features: Made from stainless steel Shuttle made from TPV O-rings made from EPDM Chrome finish

Read more less

This 4" long stainless steel shank assembly has a 1/4" bore and is commonly used when converting a refrigerator to a kegerator.  The following is included in the assembly: 4" 304 stainless steel shank with 1/4" bore Locking ring Sleeve Coupling nut Lock nut Choice of either a black plastic flange or stainless steel flange  

Read more less

Chrome plated beer shank assembly Specifications: Chrome plated brass shank 4-1/8" length 1/4" bore plastic flange Does not include hose tailpiece Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Read more less

The NUKATAP Stealth Bomber beer faucet features a forward sealing design. In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transferring to your beer while you pour. Similar to the Intertap line of faucets, but with improved laminar flow and reduced first pour foam due to its lower thermal mass. The NUKATAP is compatible with all Intertap spout accessories. Made from stainless steel Shuttle made from TPV O-rings made from EPDM Matte black finish

Read more less

This washer seals the sliding shaft inside your faucet, helping to prevent drips.

Read more less

Faucet ball washer

Read more less

Kit includes the NukaTap Mini, Flow Control Ball Lock QD, Duotight Adapter, and Self Closing Spring Mini Design – Ideal Flow Rate for Small SystemsMost conventional beer faucets are designed with 3/8" diameter spouts so you can pour a pint in just over 10 seconds. This type of flow rate is great for high turnover bars and commercial venues but isn't necessary or even desirable for all applications. For compact portable systems and home draft systems, a slower flow rate is easier to control and further reduces foaming issues due to the low liquid volume stored in the body of the faucet. The NukaTap Mini is also more ideal for pouring smaller doses. For example, cocktails where 5-8 oz of liquid is dispensed is difficult to control with a high flow rate tap. For portable systems, the NukaTap Mini with the Flow Control Ball Lock QD & Duotight Adapter assembly is small enough to literally put in your pocket, making it ideal for mini keg setups that you want to be portable or that you want to easily fit inside a domestic fridge where space is tight. Forward SealingForward sealing faucets are absolutely the way to go when it comes to beer taps. Old legacy taps still exist in the industry that are simply poorly designed. The issue with rear sealing faucets is that beer dries up on the internal piston. Aside from being unsanitary, as more and more beer dries up in these components the faucet can almost glue completely shut causing damaged seals or broken handles (this is particularly the case if it's left for some time to dry out with beer inside). These older legacy designs still exist probably due to poor education. The forward sealing designs do not have this problem and the tap drains out completely with no beer drying up on the mechanical moving parts in the same way. This makes the tap more sanitary and reduces maintenance. In many instances the price is similar so there is no reason to use a poorly designed rear sealing faucet. All NukaTap faucets are forward sealing. Laminar FlowJust like the NukaTap SS and NukaTap FC, the NukaTap Mini has been designed with laminar flow in mind. Laminar flow is critical for a beer tap as it means you will pour the beer with minimal foaming and a substantial reduction in wastage. Think about how many times a beer faucet opens and closes in its lifetime. 1,000 or maybe 10,000 times?  Laminar flow saves wasted beer in excessive foam and the better laminar flow easily pays for itself in a reduction in lost beer. To use poorer designed faucets is essentially flushing money down the sink. Extensive modeling has been done on the NukaTap design to improve laminar flow. Integrated Seals That Are Indestructible and More SanitaryUnlike other designs, the NukaTap Mini body is made from Polyketone (POK) making it strong, robust, and able to be autoclaved. The seals are also over-molded from Santoprene® making them hard wearing so they will literally last for the lifetime of the tap without the need for replacement. Santoprene® and POK both have excellent resistance to chemicals such as caustic soda, peroxide, phosphoric acid, lactic acid, citric acid, acetic acid, and all common chemicals sold and used in the beverage industry. The seals internally are over-molded meaning no fissures or cracks exist for bacteria, crud, or yeast to hide. Superior First Pour Foam Due to Low Thermal Mass and ConductivityFirst pour foam is an issue caused by a warm tap body. For most faucets to pour well it's important to dispense enough beer to cool the tap body down to reach maximum performance. In addition to this the conductivity of the tab body also makes this worse so insulative materials simply work better than conductive materials. The NukaTap mini not only has very low thermal mass but is also highly insulative being made mostly from Santoprene® and POK. The combination of these two factors in conjunction with superior laminar flow makes for the lowest "first pour foam" effect out of any tap ever produced. Long Shank AlternativeMost conventional beer faucets require a large 3/4" hole to be drilled through the side of your refrigerator, keezer, or cold box wall. Traditional long shanks also generally have a large volume of liquid that sits inside the wall unrefrigerated which is not ideal. New long shank alternatives developed for the NukaTap Mini are designed to suit any wall thickness and greatly reduces the stagnant beer sitting in the shank itself. For walls up to 2.7" thick, these wall mount shank kits include three screws, however if the wall is thicker, you can also use 6 small wood screws or something similar and attach three screws from the front and 3 from the back allowing you to go into any wall type. Another advantage of this new design is the tap will never accidentally rotate. Typically, other long shank beer taps rely on the hex nut on the shank to be done up tight enough to prevent rotation but if the wall compresses (often the case with foam walls) the tap is allowed to rotate. This new design has three fixing points making it impossible for the tap to rotate accidentally as the interlocking teeth behind the collet allow you to set the angle and then do up the collet to fix the tap permanently in that position.

Read more less

These tap handles come with a removable, erasable chalkboard surface. Additionally, the back of the tap handle features a chalkboard surface that can be written on as well, which is handy and cool if your tap handle is seen from both sides. The insert is made of a thin sheet of metal and coated with chalkboard paint. The outer portion of the tap handle is made of wood and also painted with chalkboard paint. Includes removable metal chalkboard insert Back of tap handle also serves as chalkboard surface Dimensions: 7.25" H x 2.25" W x 0.75" D

Read more less

This economical faucet option has a polished chrome-plated brass finish that will add character to either your bar/restaurant or home bar. Fits standard North American shanks. Features Cost effective draft beer faucet Highly polished chrome-plated brass finish Body and lever made of chrome-plated brass, and easy to use with quick handle action Faucet fits U.S. specification knobs and shanks Made in the USA 🦅🇺🇸 Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Read more less

The NukaTap Flow Control beer faucet features a forward sealing design with the added benefit of having a lever to adjust beverage flow. In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transferring to your beer while you pour. The Flow Control model is perfect for users that often switch between beer styles with different carbonation levels, or want to conveniently switch from pouring pints to filling growlers without having to make adjustments to the regulator pressure settings. Generation 2The NukaTap Flow Control G2 uses a completely new flow control mechanism with better sealing properties against the shank as well as improved flow control. Similar to the Intertap line of faucets, but with improved laminar flow and reduced first pour foam due to its lower thermal mass. The NukaTap is compatible with all Intertap accessories, except for the self-closing spring. The NukaTap FC uses a specially designed self-closing spring. Made from stainless steel Shuttle made from TPV O-rings made from EPDM

Read more less

This handheld draft faucet from Torpedo Keg is made with stainless steel components. A high-quality option compared to standard plastic picnic faucets or cobra taps. 1/4 OD Barb Constructed of 304 Stainless Steel

Read more less

Create your own tap handles with this insert. Simply drill a 1/2” hole in a piece of wood and thread the insert with a 3/8”, 16 thread per inch bolt with a nut attached; you can also use a coin. Once inserted, remove the bolt and attach your tap handle to your faucet.

Read more less

Facuet friction washer

Read more less

Black plastic handheld faucet compatible with the duotight 6.5mm reducer.  Also known as a cobra tap or picnic tap.

Read more less

This economical faucet option has a polished chrome-plated brass finish that will add character to either your bar/restaurant or home bar. Fits standard North American shanks. Features Economical draft beer faucet Highly polished exterior surface for a brilliant finish Body, shaft and collar is constructed of chrome-plated brass Stainless steel lever is more durable than brass when used with tall, heavy handles Faucet fits U.S. specification knobs and shanks Made in the USA  🦅🇺🇸 Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Read more less

Simply unscrew the normal spout on an Intertap faucet and screw this stout spout in its place to pour your nitro brews. This spout has a creamer/aerator disc inside that strips out the nitrogen gas for a creamier beer. Type 304 Stainless Steel Construction.

Read more less

This stainless steel Intertap Tower Shanks will fit in any 3" diameter draft tower.  The 1/4" tailpiece is Duotight compatible and pairs perfectly with the Duotight 6.5 mm x 8 mm reducer, allowing you to quickly and easily connect 8mm OD EVABarrier draft line. Duotight fitting pictured is sold separately. Please note these shanks are not compatible with Perlick brand faucets. WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less

This 3" long stainless steel shank assembly has a 1/4" bore. The following is included in the assembly: 3" 304 stainless steel shank with 1/4" bore Locking ring Sleeve Coupling nut Lock nut Choice of either a black plastic flange or stainless steel flange    

Read more less

Fill your growlers with ease with this stainless fitting and 5/16" ID or 3/8" ID tubing. Faucet insert is 1/2" OD and the barb is 3/8" OD. Fits most standard faucets. Does not fit Intertap, Nukatap, or Perlick

Read more less

KOMOS® stainless steel draft tower with Intertap faucets, EVABarrier draft line, and Duotight push-to-connect fittings. These are the same tower kits inlcuded with the KOMOS Kegerator.Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing. Each tower kit comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free.Includes: Stainless steel draft tower Intertap faucet(s) Stainless steel faucet shank(s) with Duotight tailpieces EVABarrier gas and beverage tubing Draft tower mounting screws Faucet wrench 1-3 Tap Tower Dimensions: 13.4 in. tall (without faucets) 3 in. tower diameter 4.4 in. base diameter 4 Tap Tower Dimensions: 13.4 in. tall (without faucets) 4.5 in. tower diameter Interior mounting holes (does not include bottom collar)  

Read more less

Upgrade your boring black tap handle with this shiny chrome plated one! 2-5/8" tall 7/8" wide at the top of the knob

Read more less

304 Stainless Steel Cooler Wall Coupler with 5/16" Bore. Material: Stainless Steel 304 Finish: SS Polished Length: 3" Bore ID: 5/16" Thread Size:  5/8"-14 BSP

Read more less

Easily attach this spout to your Intertap faucet. Attach tubing to the 1/2" barb to make filling growlers a breeze. Made from 304 stainless steel.

Read more less

Shank flange, stainless steel

Read more less

Perlick® 525 & 575 Series replacement lever seat o-ring  

Read more less

Shank flange, black plastic

Read more less

KOMOS matte black draft tower with NukaTap faucets, EVABarrier draft line, and Duotight push-to-connect fittings. These are the same tower kits included with the KOMOS Kegerator. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing. Each tower kit comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. Includes: Stainless steel draft tower w/ Matte Black Finish NukaTap Stealth Bomber faucet(s) Stainless steel faucet shank(s) with Duotight tailpieces EVABarrier gas and beverage tubing Draft tower mounting screws Faucet wrench 1-3 Tap Tower Dimensions: 13.4 in. tall (without faucets) 3 in. tower diameter 4.4 in. base diameter 4 Tap Tower Dimensions: 13.4 in. tall (without faucets) 4.5 in. tower diameter Interior mounting holes (does not include bottom collar)

Read more less

This stainless steel shank assembly includes a back nut, plastic collar (flange), and a 3/16" tailpiece with hex nut and gasket. If desired, the barb can be removed and swapped for a different size or replaced with a Duotight x Beer Thread Adapter. This size of beer shank is a popular choice for building your own custom draft system. Typically installed in the door of a refrigerator or the wooden collar of a converted chest freezer (keezer).  Sizing Note: The shank’s listed size refers to the total length of threaded pipe. Approximately 1-1/8” are needed to account for the thickness of the finishing collar on the front and the space for the locknut on the back. Please take this into account when sizing the shank for your project. Installation Note: On a fridge there are generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 4-1/4" - Total Length (Tip to Tip) 3-1/8" - Shank Length (Without Nut & Nipple) 2-1/4" - Thread Length 1-3/4" - Pass Through Length 3/16" Nipple California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Read more less

A shorter style plastic faucet handle with rounded top. Measurements: 2" Tall 1-1/4" Top Diameter 13/16" Bottom Diameter

Read more less