Faucets & Shanks

This insert will fit your Intertap, Nukatap, or Perlick faucet. Simply insert the filler into your faucet, attach 3/8” ID tubing, and fill your growler.

Read more less

This seal kit is suitable for both standard and flow control NukaTap faucets. Includes: NukaShuttle Tap Coupling Washer Bonnet Washer Spout Washer (2) Cup Seals Also Included (for Flow Control faucets): (2) Shaft Seals Flow Bonnet Damper Shaft Cushion Flow Slider Seal

Read more less

The Brewmaster faucet handle includes multiple inserts with different writing surfaces.  One insert surface is a reusable chalkboard and the other a white board. Tap Board Features: Includes removable inserts with different writing surfaces Back of tap handle also serves as chalkboard surface Dimensions: 7.25" H x 2.25" W x 0.75" D Note: You might need to use a bonnet angler if you converted an upright refrigerator.  Bonnet anglers allow longer tap handles to sit in a more vertical position so they do not angle back and hit the refrigerator door or wall.

Read more less

Black chrome plated tap handle. 2-5/8" tall. 7/8" wide at the top of the knob.

Read more less

This spring fits the Gen 1 NukaTap only The NukaTap flow control faucet is the world's only forward-sealing flow control tap that can use an auto close spring.  By inserting the spring between the flow control device and NukaTap shuttle, the tap will automatically close when you let go of the handle. This is perfect for customers who may not be diligent enough to remember to completely turn off the tap after each pour. Or for those with little kids or pesky cats that knock everything around! This very inexpensive spring can save you from emptying an entire keg and then losing a whole bottle of gas. Please note: this spring is not compatible with the standard non-flow control NukaTap faucet.

Read more less

Replacement regulation cone for stout faucet spout. Stout Faucet Diagram

Read more less

This insulating neoprene sleeve slips over your draft tower to keep your draft lines icy cold. The KOMOS draft tower sleeve was designed to fit the KOMOS kegerators like a glove, but can be used with most 3" and 4.5" draft towers. The sleeve comes without holes so it can be customized to fit your faucet arrangement, whether it be single, double, or triple tap. Made from 7 mm thick neoprene. Installation: Remove the faucets from the tower, keeping the shanks in place Pull the sleeve down over the tower Mark the position of the shanks and use a sharp pair of scissors to cut a hole in the sleeve Stretch the hole over the shanks and reattach the faucets

Read more less

Perlick’s 650SS forward sealing stainless steel faucet has a flow control knob to help reduce foaming. The beer only drains from the 1” nozzle, helping to prevent sticking and reduce contamination.

Read more less

Chrome plated beer shank assembly Specifications: Chrome plated brass shank 3-1/8" length 1/4" bore plastic flange Does not include hose tailpiece Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Read more less

Replacement o-ring for stout faucet spout. TapRite part SF2003-13 Stout Faucet Diagram

Read more less

Replacement O-rings for Intertap faucets.

Read more less

Perlick® 425 Series replacement o-ring. Also fits 525 and 575 series faucets.

Read more less

304 stainless faucet lever replacement for most standard U.S. draft faucets.

Read more less

Cap & Washer 304 Stainless Steel Use on single or series flushers to cap off for running in series For capping off all 5/8" BSP (beer thread) components.

Read more less

CO2 Bulk Head Length : 2-7/8” Long x 7/16″ 1/4" MFL Thread • This bulkhead allows you to keep your CO2 outside of the refrigerator or freezer and run your gas line through the wall without drill a large whole. The rubber gaskets included seal of the whole or the gas and gives.

Read more less

With all stainless steel construction, Perlick faucets are some of the best around. The forward sealing design helps prevent contamination in your faucet and reduces sticking.

Read more less

This neoprene washer seals the shank and opening on the inside a cooler wall. This prevents water and moisture from leaking into the cooler box wall.

Read more less

This tower cooler will help reduce initial use warm beer and foam by blowing cold air up from your refrigerator into your tower. Kit Includes: Fan box 12V power pack Flexible tube

Read more less

Mini Design - Ideal Flow Rate for Small SystemsMost conventional beer taps are designed with 10mm diameter nozzle/spout so you can pour a pint in just over 10 seconds. This type of flow rate is great for high turnover bars and commercial venues but this high flow rate requirement is not necessary or desirable for all applications.  For compact portable systems, or for home brew draft systems a slower flow rate is easier to control the flow and further reduces foaming issues due to the low liquid volume stored in the tap body.  This NukaTap mini is also more ideal for pouring smaller doses. For example cocktails where 5-8 oz of liquid is dispensed is difficult to control with a high flow rate tap. For portable systems, the NukaTap Mini with the Flow Control Ball Lock QD & Duotight Adapter assembly is small enough to literally put in your pocket, making it ideal for mini keg setups that you want to be portable or that you want to easily fit inside a domestic fridge where space is tight. Forward SealingForward sealing taps are absolutely the way to go when it comes to beer taps. Old legacy taps still exist in the industry that are simply poorly designed. The issue with rear sealing taps is that beer dries up on the tap piston. This is not sanitary and as more and more beer dries up in these components the tap can almost glue completely shut causing damaged seals or broken handles (this is particularly the case if it's left for some time to dry out with beer inside).  These older legacy designs still exist probably due to poor education. The forward sealing designs do not have this problem and the tap drains out completely with no beer drying up on the mechanical moving parts in the same way. This makes the tap more sanitary and reduces maintenance. In many instances the price is similar so there is no reason to use a poorly designed rear sealing tap. All NukaTap faucets are forward sealing. Laminar FlowJust like the NukaTap SS and NukaTap FC, the NukaTap Mini has been designed with laminar flow in mind. Laminar flow is critical for a beer tap as it means you will pour the beer with minimal foaming and a substantial reduction in wastage. Think about how many times a beer tap opens and closes in its lifetime. 1,000 or maybe 10,000 times?  Laminar flow saves wasted beer in excessive foam and the better laminar flow easily pays for itself in a reduction in lost beer. To use poorer designed taps is literally like flushing money down the sink. Extensive modeling has been done on the NukaTap design to improve laminar flow. Integrated Seals That Are Indestructible and More SanitaryUnlike other designs the NukaTap Mini body is made from POK making it strong, robust and able to be autoclaved. The seals are also over-molded from Santoprene® making them hard wearing so they will literally last for the lifetime of the tap without the need for replacement. Santoprene® and POK both have excellent resistance to chemicals such as caustic soda, peroxide, phosphoric acid, lactic acid, citric acid, acetic acid, and all common chemicals sold and used in the beverage industry. The seals internally are over-molded meaning no fissures or cracks exist for bacteria, crud or yeast to hide. Superior First Pour Foam Due to Low Thermal Mass and ConductivityFirst pour foam is an issue caused by a warm tap body. For most taps to pour well it's important to dispense enough beer to cool the tap body down before the tap will pour well.  In addition to this the conductivity of the tab body also makes this worse so insulative materials simply work better than conductive materials. The NukaTap mini not only has very low thermal mass but is also highly insulative being made mostly from Santoprene® and POK. The combination of these two factors in conjunction with superior laminar flow makes for the lowest "first pour foam" effect out of any tap ever produced. Long Shank AlternativeMost conventional beer taps require a large 3/4" hole to be drilled through the wall of your refrigerator, keezer, or wall. Traditional long shanks also generally have a large volume of liquid that sits inside the wall unrefrigerated which is not ideal. This new long shank alternative is designed to suit any wall thickness and greatly reduces the stagnant beer sitting in the shank itself. For walls up to 2.7" thick, these wall mount shank kits include three screws, however if the wall is thicker, you can also use 6 small wood screws or something similar and attach three screws from the front and 3 from the back allowing you to go into any wall type. Another advantage of this new design is the tap will never accidentally rotate. Typically, other long shank beer taps rely on the hex nut on the shank to be done up tight enough to prevent rotation but if the wall compresses (often the case with foam walls) the tap is allowed to rotate. This new design has three fixing points making it impossible for the tap to rotate accidentally as the interlocking teeth behind the collet allow you to set the angle and then do up the collet to fix the tap permanently in that position.

Read more less

This Micro Matic faucet is designed for performance and built-to-last. The 304 Stainless Steel Faucet delivers on style, purity, and quality! This signature faucet is the most common in the industry, capable of dispensing beer, wine, cocktails, teas, or cold brew.  The 304 Faucet is constructed with 304-grade stainless steel contact surfaces, preventing 'off-tastes' for the best beverage purity. The stainless steel body is polished to an attractive, bright finish that won't tarnish like brass or pit like chrome. It's rugged stainless steel lever makes it ideal for larger, heavier faucet handles. Whether you are looking for a faucet for commercial use or for your home bar, the 304 stainless steel faucet is one of the best beverage dispensing faucet on the market. FEATURES A distinctive style that looks great on any draft tower. Highly polished exterior surface for a brilliant chrome-like finish Constructed of 304-grade stainless steel components – won't taint beverage flavors Stainless steel body will not pit or tarnish Dispense a wide range of beers, wine, kombucha, cocktails, cold brew, or any other beverage Stainless steel lever is more durable than brass when used with tall, heavy handles Easy to disassemble and clean NSF certified Faucet fits U.S. specification knobs and shanks Made in the USA 🦅🇺🇸

Read more less

Stainless steel shank assembly with black plastic flange.  A great option for dispensing beer, wine, cider, or kombucha.   Specifications Length: 4-1/8" Bore I.D.: 1/4" Thread: 7/8"-14 (5/8" BSP) Material: 304 stainless steel shank

Read more less

This stainless steel nitrogen stout faucet will ensure the perfect pour for your nitrogen stouts to give you that creamy mouth-feel that Guinness and other stouts are famous for. Specifications: Material: 304 Stainless Steel Finish: Polished Body Thread: 1-1/8" 18 UNEF Lever Thread: 3/8" X16 UNC Lever Material: Brass Spout Material: Stainless Steel Approvals: NSF Certified Made in India

Read more less

Attach this fitting to convert your Intertap faucet to a ball lock quick disconnector.

Read more less

This 6" long stainless steel shank assembly has a 1/4" bore. The following is included in the assembly: 6" 304 stainless steel shank with 1/4" bore Locking ring Sleeve Coupling nut Lock nut Choice of either a black plastic flange or stainless steel flange

Read more less

This Self Closing Spring is made of 304 stainless steel and designed specifically to ensure your NukaTap Mini stays closed when it should. Simply let go of the tap handle and the tap will snap shut and prevent accidentally leaving the faucet open and wasting pressure beer. This handy device suits all NukaTap Mini tap and shank combinations. This spring also fits the Gen 2 NukaTap Flow Control faucet

Read more less

Replacement jet disc for stout faucet spout. TapRite part SF2003-14 Stout Faucet Diagram

Read more less

Use with a hanger bolt to attach to a wooden tap handle. This ferrule has 5/16” top threads and 3/8” bottom threads.  

Read more less

Faucet shank coupling nut, chrome plate, 1 1/8 - 18.  

Read more less

This stainless steel shank assembly includes a back nut, plastic collar, hex nut, and a 1/4" barb. For a new installation, you will need a 1" hole saw. Dimensions: 5-1/4" - Total Length (Tip to Tip) 4-1/8" - Shank Length (Without Nut & Nipple) 3" - Thread Length 2-3/4" - Pass Through Length

Read more less

CO2 Bulk Head Length : 4” Long x 7/16″ 1/4" MFL Thread • This bulkhead allows you to keep your CO2 outside of the refrigerator or freezer and run your gas line through the wall without drill a large whole. The rubber gaskets included seal of the whole or the gas and gives.

Read more less

Simply unscrew the normal spout on a NukaTap or Intertap faucet and screw this stout spout in its place to pour your nitro brews. This spout has a creamer/aerator disc inside that strips out the nitrogen gas for a creamier beer. Matches perfectly with the NukaTap Stealth Bomber faucet! Stainless steel construction with matte black finish. Note: Pictured faucet sold separately.

Read more less

Flanged lock nut for beer shanks, 1-3/16" hex, 29/32-14 thread.

Read more less

Draft tower shank assembly for 2.5" diameter tower. Specifications: Shank Length: 2.25" Shank Material: Chrome plated brass Bore Size: 3/16" with 1/4" counter bore Barb Size: 1/4" Flange Material: Chrome plated plastic 

Read more less

Chrome plated beer shank assembly Specifications: Chrome plated brass shank 5 1/8" length 1/4" bore plastic flange Does not include hose tailpiece Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Read more less

Manufactured by Krome Dispense, the shank is made from stainless steel 304, is 4-1/8” long and has 3/16” Bore ID.  Includes black plastic flange, coupling sleeve, snap ring, and coupling nut. Stainless steel will not impart any off-tastes and will not tarnish like brass or pit like chrome.  Stainless is a great choice for all beer, wine, cocktails, or cider. Specifications: Shank Material: 304 Stainless Steel Length: 4-1/8" Bore ID: 3/16" Thread Size: 5/8"-14 BSP Made in India.  

Read more less

Also called a faucet positioner because it angles big tap handles from touching the wall or refrigerator. Installs on top of beer faucet lever and then the tap handle thread into this bonnet angler. Made from chrome plated brass.

Read more less