Kegs & Parts
Replacement PRV (35 psi)
Replacement pressure relief valve rated to blow at 35 psi. This is a direct replacement of the PRV featured on the FermZilla and Kegmenter. It is also compatible with homebrew kegs and the KOMOS® CO2 regulator if you desire a lower blowoff pressure.
$6.99
Low2 Cornelius Keg Lid O-ring | Superior Oxygen Barrier Properties
96% reduction in oxygen ingress compared to silicone O-rings when measured in a keg! Made from a special blend of materials, these gaskets offer vastly improved oxygen barrier properties compared to Silicone or EPDM Give your beverage the absolute best protection from oxygen staling with KegLand's Low2 O-rings! The result is your beverage staying fresher for longer! Compatible with any ball lock or pin lock corny-style keg with standard lid Upgrade the storage life of your beer by replacing your standard keg lid O-ring with the new Low2 O-ring from KegLand. Even the most perfectly sealed keg is susceptible to oxygen ingress through the hatch O-ring—yes, even if the keg is under constant pressure with CO2! Even a leak-free, pressurized keg will release CO2 molecules as they pass through the lid O-ring itself, and conversely, Oxygen molecules will permeate through the O-ring and diffuse into the keg when they reach the surface area on the other side. The level of permeability is wide ranging and highly dependent on what material the O-ring is made from. Rather than the usual EPDM or Silicone, Low2 gaskets are made from a unique composition of Synthetic M-Class and Cross-Link Elastomers. This special blend has superior oxygen barrier properties that results in your beverage staying fresher for longer.
$3.99
Sankey D & S System Spear removing / Opening Demounting Tool
Sankey D and S System Spear removing / Opening Demounting Tool Stainless steel commercial keg opening tool. Suitable only for D and S system kegs also called American and European Sankey kegs respectively. Use this Keg spear demounting tool for cleaning and servicing. Spanner tool to remove the spear from a D-TYPE or S-TYPE keg Sturdy tool with a long rod for easy handling Always degas before proceeding to remove keg valve.
$39.99
Replacement PRV (100 psi)
The most common relief valve. Fits most Cornelius and Firestone style kegs. Long body with spring with gray top and pull ring. Max. pressure rating: 100 psi
$7.99
Plug Adapter, 1/4'' FFL x 19/32''
Allows you to attach a keg post with 19/32" threads to a 1/4" flare fitting. Simply screw a post on to the adapter, attach it to a 1/4" flare fitting, and then connect a pin or ball lock connector.
$5.95 $2.99
Straight Beverage Out Dip Tube
Replacemnet straight beverage (liquid) out dip tube for Firestone and Cornelius kegs. Stainless Steel Approximately 23" in length.
$22.99
Replacement PRV (65 psi)
Replacement pressure relief valve rated to blow at 65 psi. This is a direct replacement of the PRV featured on the KOMOS® CO2 regulator. The Green PRV can also be used with pressurizable FermZilla models for hydro testing. Note that under normal operation, the FermZilla should always be used with the Red PRV (35psi).
$6.49
Poppet Valve, Ball (Wood/Old-Fire)
Fits John Wood and old style Firestone Challenger ball lock tank (has plastic insert under tank plug).
$4.50
Adapter, 1/4'' FFL x 19/32-18 UNF (Cornelius)
Cornelius and A.E.B. Adapter for Ball-Lock or Pin-Lock Plugs Adapters for product tank plugs allows plugs removed from product to be used for other purposes. - 1/4" FFL x 19/32" - 18 UNF- Female Flare Note: Gas and Liquid Plugs use the same adapter.
$8.95 $4.99
Replacement PRV (17 psi)
Replacement pressure relief valve rated to blow at 17 psi. Fits FermZilla and Kegmenter. It is also compatible with homebrew kegs and the KOMOS® CO2 regulator if you desire a lower blowoff pressure.
$6.99
Tank Plug, Liq/Ball (Wood/Old-Fire)
Fits John Wood and old style Firestone ball lock tanks. Thread size 3/4 - 18, plastic insert included.
$24.00
Pin Lock Body Connect 3 Pin Liquid-Out
Liquid out pin lock (3 pin) body connect. 19/32" - 18 pitch thread.
$14.95
Pin Lock Body Connect 2 Pin Gas-In
Gas in pin lock (2 pin) body connect. 19/32" - 18 pitch thread. Poppet valve is not included.
$9.99
Keg Spear Locking Disc
Locking disc for Sankey D type keg spears. Sankey D Spear Exploded View
$4.95
Keg Spear Body O-Ring
Keg spear body o-ring for Sankey D and Sankey S type spears. Sanke D Spear Exploded View
$0.95
Insert, Tank Plug, Ball (Old-Fire)
Fits tank plugs for John Wood and old style Firestone Challenger tanks.
$2.50
Firestone / Challenger Ball Lock Gas Post
- Tank Plug, Ball-Lock (gas)- For Firestone V & VI Challenger and Super Challenger Tanks- 9/16 - 18 Thread size- Plug includes Poppet and O-Ring.
$19.95
Corny Lid Boot (Cap), A.E.B
Helps protect your keg from scratches from your lid.
$0.75
1/4'' FPT Liquid Ball Lock Adapter
Liquid Firestone Adapter for Ball-Lock ONLY Adapters for product tank plugs allows plugs removed from product to be used for other purposes. - 1/4" FPT x 10/16"-18- Female Pipe Thread Note: Gas and Liquid Plugs use DIFFERENT adapters.
$18.95 $12.99
1/4'' FPT Gas Ball Lock Adapter
1/4" FPT Gas Ball Lock Adapter Gas Firestone Adapter for Ball-Lock ONLY Adapters for product tank plugs allows plugs removed from product to be used for other purposes. - 1/4" FPT x 9/16"-18- Female Pipe Thread Note: Gas and Liquid Plugs use different adapters.
$18.95 $11.99
1/4'' FFL Liquid Ball Lock Adapter
1/4" FFL Liquid Ball Lock Adapter Liquid Firestone Adapter for Ball-Lock ONLY Adapters for product tank plugs allows plugs removed from product to be used for other purposes. 1/4" FFL X 10/16"-18 Female Flare Note: Gas and Liquid Plugs use different adapters.
$7.95 $4.50
1/4'' FFL Gas Ball Lock Adapter
1/4" FFL Gas Ball Lock Adapter Gas Firestone Adapter for Ball-Lock ONLY Adapters for product tank plugs allows plugs removed from product to be used for other purposes. 1/4"FFL x 9/16"-18 Female Flare Note: Gas and Liquid Plugs use DIFFERENT adapters.
$7.95 $4.50
