Kegs

Used dual handle 5 gallon ball lock Corny keg with new O-ring gaskets.  Kegs have been pressure tested, cleaned, and sanitized.

Read more less

New dual rubber handle, ball lock stainless steel keg. Features: 5 gallons Rated to 130 PSI Dry hop tab under keg lid 304 stainless steel NSF certified 24.75" h x 8.375" diameter Imported from China  

Read more less

New dual rubber handle ball lock stainless steel keg. Features: 2.5 gallons Rated to 130 PSI Dry hop tab under keg lid 304 stainless steel Imported from China 14.5" h x 8.375" diameter

Read more less

The patented,Torpedo Kegs are a new lineup of Stainless Steel Ball Lock kegs.  We've taken the features and solid construction of classic ball lock kegs (High Quality welds, pressure reliefs, ball lock fittings & Corny lid) and added a couple more. Laser welded 304 SS construction and rolled Stainless Handles guarantee years of trouble free use.  These are stackable kegs, any size stacks on any other size.  This means you'll be able to save space in the garage or kegerator, since they can be stacked w/ ball lock fittings attached and serving. Features: 304 SS Construction High Quality Laser Welded Seams ISO9001 Quality Assurance 130 PSI Max Pressure PRV Rating: 85 psi Rolled SS handles make transport easy Stackable kegs - storage or serving Kegs come Boxed individually Kegs are marked with size, material, max pressure, ISO9001, In & out for fittings, & A Max Pressure warning.

Read more less

Torpedo Kegs too wide? Want to squeeze another keg in your kegerator? The patented design, of the new Slimline Torpedo Keg is 9% more slim than the classic model with all the same great features. Coming in at about 1/4" thinner than standard Ball Lock Cornelius Kegs, this keg has welded stainless handles and the ability to stack kegs with fittings still in place all at a great price. Cool FeaturesTorpedo Kegs were designed to stack with Ball Lock quick disconnects in place and serving which is a cool feature for some brewers who have vertical space in their refrigerator. We also like the rolled stainless steel handles. They are comfortable to grab and will never come off like some rubber handles can over time. “In” and “Out” is etched near the keg posts for easy identification which is very handy when you are connecting lines in a refrigerator or kegerator and trying not to make a mistake.  Specifications: Max Pressure: 130 psi PRV Rating: 85 psi High Quality Laser Welded Seams ISO9001 Quality Assurance Made from 304 Stainless Steel

Read more less

Nothing is more refreshing that having your own soda water on tap at home.  SodaStream units are great but filling up those tiny 1L bottles is a pain and those small CO2 cylinders run out fast and are expensive to swap.  Solve this problem once and for all with the Continuous Soda Carbonator Keg Reactor Solution. KegLand has invented this really easy-to-use keg lid that attaches to a standard ball lock keg.   Setup: Position the keg inside your fridge or kegerator (ideally below 40°F). Attach your beverage draft line to the soda water out post. Attach your gas line to the gas-in post. Set your CO2 regulator to 30-50 psi, depending on how highly carbonated you like your soda water. We highly recommend using a check valve on your CO2 line. On first use, purge the air from the headspace of the keg. Connect the mains water to the water inlet post on the lid of the keg. It is recommend to also use a check valve on your mains water line to prevent soda water from going back into your house mains. Depending on your mains water pressure, you may need to reduce it using the Duotight In-Line Regulator. For the Carbonator Keg Lid to work well, the mains water pressure should be 30-40 psi higher than your regulator set pressure (from Step 4). That's it. This simple unit will give you continuous soda water connected to your mains water.

Read more less

PCO38 threaded tapping head pairs perfectly with Oxebar Mono PET Kegs for a lightweight, affordable draft dispensing system Dip tube features a filter attachment to keep solids in the keg and out of your glass Includes liquid and gas ball lock posts and pull-ring PRV rated to 36 psi This handy PCO38 Tapping Head assembly is a great way to get into kegging. Using standard homebrew ball lock disconnects, this is a convenient, light weight, robust and inexpensive solution to kegging beer, cocktails, kombucha, wine, and other beverages. This PCO38 tapping head assembly has been designed to suit standard PCO38 bottle necks such as the 4L Oxebar Mono PET Keg. KegLand utilizes quality engineering plastics and efficient injection stretch blow mould processes to manufacture economical kegs and tapping heads for both homebrewing and commercial beers. The plastics used in the tapping head can withstand a wide range of chemicals used in the brewing industry and relatively high temperatures (212°F / 100°C). The Ball Lock Tapping Head kit comes with 2.5 BAR (36 psi) PRV, liquid and gas ball lock posts, and dip tube with filter attachment.

Read more less