Regulators

The KOMOS industrial gauge regulator aims to be the last regulator you'll ever need. Large body and precision diaphragm provide high flow rates, and pressure settings are quickly and easily dialed in the with hand knob. The pressure gauges are made from thick stainless steel and come with rubber bumpers for an extra layer of protection. Triple-scale dial faces read in psi, bar, and kPa. Includes a 1/4" flare fitting with barbed outlet. Also included is a Duotight adapter which allows the regulator to be easily used with EVABarrier draft tubing. Features: 0 - 60 PSI Strong, robust design Highly accurate precision diaphragm Easily adjusted by hand 1/4" flare fitting with barbed outlet Duotight adapter fitting included for use with EVABarrier draft tubing Heavy duty steel gauges with rubber bumpers 65 psi PRV M6 mounting screw holes Made in accordance with AS 4267  

Read more less

The Duotight In-Line regulator works with both gas and liquid. The flow can easily be adjusted with the yellow adjustment knob. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing. Features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The gauge is removable and can be swapped out with a gauge of a different pressure range.Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-60 psi Made with quality EPDM seals Wall mountable

Read more less

Safely control the flow of CO2 with Micro Matic's Premium Plus dual gauge co2 regulator low pressure primary regulator with an in-place check valve in the shutoff preventing liquid from backing up into the regulator. This is useful for homebrewers who use corny kegs as most corny kegs have no check valves on the keg couplers (ball lock fittings). For added safety, this model has an integrated pressure relief valve that vents if pressures exceed 55-65 PSI. This primary regulator comes with an output gauge that monitors pressure up to 60 PSI to provide you options for different beers while the tank gauge has a 0-3000 PSI range so you know how much pressure remains in your cylinder. Premium Plus regulators come standard with a tamper-evident adjustment screw and bonnet, preventing unauthorized adjustment to gas pressure which can cause foaming/performance issues.  Micro Matic is committed to producing the best quality gas equipment in the industry. Made right here in the USA, every regulator that leaves their plant goes through a rigorous quality control testing process ensuring accuracy, reliability, and optimal performance in the market. The Premium Plus regulator offers industry-leading features, providing a better performing, better quality, and better-tested regulator.  CO2 GAS REGULATOR FEATURES  Adjust pressure from 0 to 60 PSI  Built for durability: forged brass body, accurate machining, tin nickel plated  Useful for homebrewers who use corny kegs as most corny kegs have no check valves on the keg couplers (ball lock fittings)  Premium quality metal gauges for durability  One piece heavy duty seat capsule  Constant pressure supply at high output flow rates  Factory leak tested at 2900 PSI  Tamper-evident adjustment screw and bonnet  Durable built-in long-lasting solid nylon inlet seal  Enlarged CO2 port for high volume  Safety relief valve releases at 55-65 PSI  Made in the USA 🦅🇺🇸 For home or commercial use 

Read more less

The BlowTie 2 Spunding Valve complete kit is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style spunding valve is much more accurate than the poppet style. The blow off pressure can be easily set using the BlowTie's integrated pressure gauge. The kit includes everything you'll need to use the spunding valve right out of the bag. Kit Includes: BlowTie 2 w/ Integrated Pressure Gauge (0-15 psi) Ball Lock Disconnect Duotight Flare Fitting 8 mm OD Rigid Plastic Joiner

Read more less

Safely control the flow of nitrogen to a single keg with this made in the USA, Micro Matic Premium Plus primary low pressure nitrogen regulator. The primary nitrogen regulator is designed to decrease the gas cylinders high pressure to a lower, usable pressure for: mix gas (CO2 - N) for beer, wine and cold brew dispensing or servicing a gas blender. For added safety, this model has an integrated pressure relief valve that stops the gas flow if pressure gets too high (at 55-65 PSI). This primary regulator comes with an output gauge that monitors pressure up to 60 PSI to provide you options for different beers while the tank gauge has a 0-3000 PSI range so you know how much pressure remains in your cylinder. Premium Plus regulators come standard with a tamper evident adjustment screw and bonnet, preventing unauthorized adjustment to gas pressure which can cause foaming/performance issues. Features Adjust pressure from 0 to 60 PSI Built for durability: forged brass body, accurate machining, chrome plated finish Premium quality metal gauges for durability Factory leak tested at 2900 PSI Tamper evident adjustment screw and bonnet Nickel-plated valve seats for high corrosion resistance Quad-ring inlet seal at tank connection Fixed exchangeable inlet seal Enlarged nitrogen port for high volume Safety relief valve releases at 55-65 PSI Made in USA For home or commercial use Use for mix gas (CO2 - N) for beer, wine and cold brew dispensing or servicing a gas blender NOTE: The primary nitrogen regulator is designed to decrease the gas cylinders high pressure to a lower, usable pressure for: mix gas (CO2 - N) for beer, wine and cold brew dispensing or servicing a gas blender. Specifications: Performance: 1 Pressure / 1 Product Output Pressure Gauage: 0-60 PSI, for accurate product pressure Tank Pressure Gauge: 0-3000 PSI, for accurate remaining tank pressure Outlet Barbs: 3/8" O.D. (To fit 5/16" I.D. Gas Hoses) Pressure Relief Valve: Safety pressure relief valve releases at 55-65 PSI

Read more less

Micro Matic is committed to producing the best quality gas equipment in the industry. Made right here in the USA, every regulator that leaves their plant goes through a rigorous quality control testing process ensuring accuracy, reliability and optimal performance in the market. Micro Matic's Premium Plus regulator offers industry leading features, providing a better performing, better quality and better tested regulator. Safely control the flow of CO2 simultaneously to two kegs of beer with this Premium Plus low pressure primary regulator. For added safety, this model has an integrated pressure relief valve that stops the gas flow if pressure gets too high (at 55-65 PSI). This primary regulator comes with an output gauge that monitors pressure up to 60 PSI to provide you options for different beers while the tank gauge has a 0-3000 PSI range so you know how much pressure remains in your cylinder. Premium Plus regulators come standard with a tamper evident adjustment screw and bonnet, preventing unauthorized adjustment to gas pressure which can cause foaming/performance issues. Features Adjust pressure from 0 to 60 PSI Built for durability: forged brass body, accurate machining, tin nickel plated Premium quality metal gauges for durability Constant pressure supply at high output flow rates Factory leak tested at 2900 PSI Tamper evident adjustment screw and bonnet Enlarged CO2 port for high volume Safety relief valve releases at 55-65 PSI Made in USA For home or commercial use Specifications: Performance: 1 Pressure / 2 Product Installation: CO2 tank mount (CGA-320 threads) Output Pressure Gauge: 0-60 PSI, for accurate product pressure Outlet Barbs: 3/8" O.D. (To fit 5/16" I.D. Gas Hoses) Pressure Relief Valve: Safety Pressure Relief Valve Releases at 55-65 PSI Capacity: SCFM 3.5 Max Tank Pressure Gauge: 0-3000 PSI, for accurate remaining tank pressure

Read more less

KegLand has developed the world's most compact mini digital gauge with backlight illumination. This very compact design retains high accuracy while still meeting the desirable small form factor.  This meets the growing need as mini keg systems, mini regulators and other more compact keg dispensing solutions are required. Traditional analogue gauges require a small capillary mechanism where a small pipe expands and unravels under pressure. This in turn drives a mechanical cog to rotate the gauge needle.  This age-old technique works quite well especially in large gauges but as this mechanism is manufactured smaller and smaller a tradeoff between accuracy and size becomes the issue.  With very small gauges such as a 27mm x 27mm Mini Gauge, it's difficult to make them better than 10% accuracy due to the physical constraints of the mechanical components. Compatible With: BlowTie 2 Spunding Valve Duotight In-Line Regulator w/ Gauge Core 360 Mini CO2 Regulator Specifications: Battery Life: More than 2 years (using the mini gauge once a day) Battery Type: CR2032 Auto Battery Saver: automatically turns off after 15 sec Size: 27mm x 27mm (1" x 1") Radial O-ring Stem: 7.8mm Bore Please note: This gauge is not suitable for measuring pressure of liquids.  It is only for measuring gas pressure.  If liquid gets into the pressure transducer it will damage the gauge.

Read more less

Send different pressures to two separate kegs from the same CO2 tank with the KOMOS Dual Body Regulator. This industrial gauge regulator aims to be the last regulator you'll ever need. Large dual-body and precision diaphragms provide high flow rates, and pressure settings are quickly and easily dialed in the with hand knobs. The pressure gauges are made from thick stainless steel and come with rubber bumpers for an extra layer of protection. Triple-scale dial faces read in psi, bar, and kPa. Comes with 1/4" flare fitting with barbed outlets. Included Duotight adapters allow the regulator to be easily used with EVABarrier draft tubing. Features: 0–60 PSI operating range Low pressure gauge reads from 0–100 Pull ring PRV rated to blow off at 65 PSI Strong, robust design Highly accurate precision diaphragm Easily adjusted by hand 1/4" flare fitting with barbed outlet Duotight adapter fitting included for use with EVABarrier draft tubing Heavy duty steel gauges with rubber bumpers M6 mounting screw holes Made in accordance with AS 4267 Made in China Warning: This product contains lead and/or lead compounds, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warning.ca.gov  

Read more less

The new Core 360 Mini CO2 Regulator from KegLand represents a huge jump forward in the mini regulator market. After much feedback on how to make mini regulators more compact, sturdy and efficient, the brilliant engineers at KegLand have come up with this mini-beast. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge The heavy-duty chrome-plated solid cast brass body will stand up to years of abuse, and is well-suited to protect the mini pressure gauge. A unique 2-step cartridge installation process results in zero gas loss. First the cartridge is fully threaded into the unit to form a seal before it's opened, then the actuator pin is threaded down to puncture the cartridge and release gas into the regulator. The included bushing adapter is ready to accept 16g 3/8"-24 UNF threaded cartridges, and with an additional adapter (coming soon!) you can switch to 74-gram 5/8"-18 UNF threaded cartridges. The gas outlet can be swapped between a female flare connection for flare ball lock disconnects and a 6.5mm Duotight-compatible barb for use with draft line. The barb is a great option for dispensing commercial kegs. There are also two potential outlets at either the side or the front of the regulator. This makes it easy to orient the regulator depending on whether you're using plastic or stainless steel ball lock disconnects. If you remove the 16g cartridge bushing, you'll find TR21-4 female threads for use with SodaStream gas cylinders. These can be a great option for mobile dispensing— they provide much more gas than a CO2 cartridge and are more easily transported than a full CO2 tank. Includes: KegLand Core 360 Mini Regulator 6.5mm Duotight-compatible hose barb Female Flare Fitting for MFL Disconnects Port end cap 65psi Green PRV SodaStream to 16g thread bushing   Instruction Manual

Read more less

Draft Beer CO2 regulator to nitrogen tank adapter Quickly converts a CO2 regulator into a nitrogen regulator. Converts female CGA-320 threads to make CGA-580 threads. Ideal for occasional use of mixed gas cylinders with nitrogen connection. Material: Brass

Read more less

Portable CO2 charger that eliminates the need for costly CO2 tanks & hoses. Pressurizes any 3 or 5-Gal corny keg. Works on either ball-lock or pin-lock fittings with 1/4" flare connection. Cartridges and connectors are not included.

Read more less

The BlowTie 2 Spunding Valve complete kit is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style spunding valve is much more accurate than the poppet style. The blow off pressure can be easily set using the BlowTie's integrated pressure gauge. The kit includes everything you'll need to use the spunding valve right out of the bag. The BlowTie 2 can also be upgraded with a Digital Mini Pressure Gauge. Kit Includes: BlowTie 2 w/ Integrated Pressure Gauge (0-15 psi) Kegland Red Gas Ball Lock Disconnect 8 mm OD Rigid Plastic Joiner

Read more less

Micro Matic is committed to producing the best quality gas equipment in the industry. Made right here in the USA, every regulator that leaves Micro Matic's plant goes through a rigorous quality control testing process ensuring accuracy, reliability and optimal performance in the market. Their new Premium Plus regulator offers industry leading features, providing a better performing, better quality and better tested regulator. Easily convert any primary CO2 regulator into a dual product primary regulator. Premium Plus Add-On CO2 regulator is ideal for dispensing two draft beers that require different CO2 pressures. The add-on module type design makes expansion easy. Features: Built for durability: forged brass body, accurate machining, chrome plated finish Premium quality metal gauges for durability Factory leak tested at 2900 PSI Tamper evident adjustment screw and bonnet One piece heavy duty seat capsule Durable built in long lasting solid nylon inlet seal Enlarged CO2 port for high volume Constant pressure supply at high output flow rates Adjust pressure from 0 to 60 PSI Safety relief valve releases at 55–65 PSI Made in USA For home or commercial use Specifications: Performance: 1 Pressure / 1 Product Output Pressure Gauge: 0-60 PSI, for accurate product pressure Outlet Barb: 3/8" O.D. (To fit 5/16" I.D. Gas Hoses) Pressure Relief Valve: Safety Pressure Relief Valve Releases at 55-65 PSI Capacity: SCFM 3.5 Max Installation: CO2 tank mount (CGA-320 threads) WARNING:This regulator must be connected to a primary CO2 regulator. The threaded high pressure port on the left hand side is designed for a tank mount (primary) regulator. Not connecting a regulator to this exposed port will allow high pressure CO2 to vent straight through the regulator body. Batteries with more then two regulators should be wall mounted. This is done with the addition of wall brackets for mounting and a high pressure CO2 hose for connection to the gas cylinder. To prevent your gas cylinder from falling over and damaging the regulators, be sure the cylinder is always secured in an upright position with either a chain or strap. Additionally, be sure the cylinder is located away from any sources of heat.

Read more less

This mini pressure gauge is compatible with the BlowTie 2 spunding valve, Duotight in-line regulator, and KegLand mini regulator. It is recommend using the gauge with a range closest to your desired pressure setting. Pressure Range: 0-15 psi (0-1 bar) Body Dimensions: 26mm x 26mm x 15mm Probe Diameter: 8mm

Read more less

This adapter can be installed on the Core 360 Mini Regulator from Kegland in order to use 74 gram CO2 cartridges. Use a crescent wrench to remove the stock adapter piece for 12 gram cartridges and simply screw in this adapter with 5/8-18 UNF female threading. Switching to 74 g cartridges will allow you dispense 1-4 Cornelius kegs, depending on how it is used and the CO2 consumption required. TR21-4 Male Thread x 5/8-18 UNF Female Thread Adapter only. Regulator and CO2 cartrdige sold separately. KegLand Part Number: KL20411  

Read more less

Stainless steel gauge cage for KOMOS CO2 dual gauge regulators.  Includes mounting screws. Pictured regulator not included.  

Read more less

Use the Duotight Flow Stopper when filling kegs, during keg to keg transfers, or fermenter to keg transfers to automatically cut off the flow when the keg is full. Simply attach this device to the output gas post of your keg, then when the keg is full it will prevent further liquid exiting the gas post.   The Flow Stopper pairs perfectly with the BlowTie Spunding Valve, which will enable you to apply head pressure to the keg. This allows you to control the flow speed and reduce the foam generated in the filling process. You will need a short length of 8 mm OD EVABarrier tubing to connect the BlowTie to the outlet of the Flow Stopper.   Includes: 2 x Duotight 8 mm x 5/8" FPT 1 x Duotight 8 mm elbow (DUO107) 1 x Duotight 8 mm x 1/4 in. flare (DUO106) 1 x Ball float 1 x Stainless spring 2 x 8 mm OD EVABarrier joiners 1 x Acrylic sight glass Pictured Ball lock fitting, BlowTie spunding valve, and Keg not included.

Read more less

The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style of spunding valve is much more accurate than the poppet style. The 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing. The BlowTie 2 features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The gauge is removable and can be swapped out with a gauge of a different pressure range. Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-15 psi WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge.

Read more less

Draft Beer CO2 regulator to nitrogen tank adapter Quickly converts a Nitrogen into a CO2. If you own a nitrogen regulator and want to use it on a Co2 tank, then the following adapter can save you money! Simply screw on one side of the adapter to your nitrogen regulator and the other side to your Co2 tank valve. Connects a nitrogen regulator to CGA-320 Co2 tank valve

Read more less

This Premium Plus low pressure primary regulator has a 15 PSI gauge head for accurate adjustment in low pressure dispensing applications. Many wine and cask conditioned systems use 5 PSI or lower for dispensing and maintaining a low pressure blanket on the wine or beer. For added safety, this model has an integrated pressure relief valve that stops the gas flow if the pressure gets too high (55-65 PSI). Premium Plus regulators come standard with a tamper-evident adjustment screw and bonnet, preventing unauthorized adjustment to gas pressure which can cause service issues. FEATURES Adjust pressure from 0 to 15 PSI Built for durability: forged brass body, accurate machining, chrome-plated finish Premium quality metal gauges for durability Tamper-evident adjustment screw and bonnet Nickel-plated valve seats for high corrosion resistance Enlarged CO2 port for high volume Safety relief valve releases at 55-65 PSI Factory leak tested at 145 PSI Made in the USA Excellent for dispensing keg wine and cask beer Specifications: Performance: 1 Pressure / 1 Product Height: 7-1/4" Width: 3-3/4" Depth: 5-1/2" Pass-thru barbs, Includes plug  

Read more less

Safely and effectively control the flow of CO2 to a single keg in your draft beer system. Secondary gas regulators reduce pressure from a primary regulator or gas blender and provide this lower pressure to each individual keg. Easily add another carbonated beverage to your existing system with this Premium Plus secondary regulator; the integrated pass-thru bar saves time and provides convenience in the field. For added safety, the integrated pressure relief valve stops the gas flow if the pressure gets too high (55-65 PSI). Premium Plus regulators come standard with a tamper-evident adjustment screw and bonnet, preventing unauthorized adjustment to gas pressure which can cause service issues. FEATURES Adjust pressure from 0 to 60 PSI Built for durability: forged brass body, accurate machining, chrome-plated finish Premium quality metal gauges for durability Tamper-evident adjustment screw and bonnet Enlarged CO2 port for high volume Factory leak tested at 145 PSI Safety relief valve releases at 55-65 PSI Made in the USA Specifications: Performance: 1 Pressure / 1 Product Height: 7-1/4" Width: 3-3/4" Depth: 5-1/2" Output Pressure Gauge: 0-60 PSI, for accurate product pressure Outlet Barbs: 3/8" O.D. (To fit 5/16" I.D. Gas Hoses) Pressure Relief Valve: Safety Pressure Relief Valve Releases at 55-65 PSI Capacity: Safety pressure relief valve releases at 55-65 PSI

Read more less

Made from 304 stainless steel, set of 2, for the front and back of your gauges. These cages will protect your regulator gauges from damage. Works with Micro Matic and NADS regulator.

Read more less

Protect your Taprite brand regulator with this metal guard.  Tanks occasionally tip over and damage the gauges when they do. This guard takes the blow instead of your gauge.   Attaches to the regulator by screwing into the back.  Does not work with the Micromatic or Komos branded regulators.

Read more less

Allows you to easily use a 74g CO2 cartridge with your 16g hand held keg charger. This adapter has a 5/8" male end and a 3/8" female end.

Read more less

The Duotight In-Line Regulator works with both gas and liquid. Easily adjust the flow can be adjusted with the yellow adjustment knob. 6.35 mm Duotight fittings at both inlet and outlet make this unit perfect for use with 6.35 mm OD tubing.  Features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge. The size of the Duotight connection and the extended 0-150 PSI pressure range makes this model perfect for stepping down the pressure of your mains water line for use with water filtration or RO systems. Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 6.35mm (1/4") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-150 psi Made with quality EPDM seals Wall mountable WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge.

Read more less

These regulators work great for reducing your main pressure from 0-150 psi. Suitable for both gas and liquid. The 8 mm Duotight inlet and outlet are compatible with EVABarrier tubing. Specifications: Pressure Range: 0–150 psi Suitable for mains water pressure Liquid and gas compatible Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Wall mountable Made from non-corrosive acetyl, nitrile, and stainless parts

Read more less

Portable, mini, two stage co2 regulator with a range of 7-21 PSI. This regulator uses 74g cartridges and provides constant pressure to your vessel. Cartridges not included.

Read more less

The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style spunding valve is much more accurate than the poppet style. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing. The blow off pressure can be set by either pairing the BlowTie with the Push-In Pressure Gauge, or by attaching it to an empty keg that has been pressurized to the desired psi.     Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends 0-40 psi pressure rating

Read more less