Draft Supplies
RHT Hex Nipple, 2.5" x 1/4" NPT
This brass hex nipple is 2.5" in length and has 1/4" NPT, right hand threads (rht). It is commonly used for secondary regulators.
$6.99
6-1/8"' 304 Stainless Steel Shank Assembly
6-1/8" stainless steel shank assembly for dispensing beer, wine, cider, or kombucha. Wall flange is a black plastic material. Specifications: Length: 6-1/8" Bore ID: 1/4" Thread: 7/8"-14 (5/8" BSP) Material: 304 stainless steel shank
$48.60
Star Washer, Dual Shank
Replacement star lock washer for dual shank.
$1.95
CO2 Regulator Inlet Nipple - LHT
Replacement keg beer regulator CO2 Inlet Nipple. Specifications: 1/4" NPT Left Hand Thread (LHT) 2-1/4" Length
$14.99
Low Pressure Back Mount Gauge
A 0-15 lb low pressure, 1/4" thread back mounted pressure gauge commonly used on spunding valves.Please Note: Color/ style of gauge may vary
$13.99
Locking Flange for Wall Shank
Attach this flange to a wall and help prevent your beer shank and faucet from rotating with a set screw. Material: Brass Finish: Brass Thread Size: 5/8”-14BSP
$11.95 $8.99
Draft Tower Shank Assembly for 3'' Tower
Draft tower shank assembly for 3" diameter tower. Specifications: Shank Length: 2.25" Shank Material: Chrome plated brass Bore Size: 3/16" with 1/4" counter bore Barb Size: 1/4" Flange Material: Chrome plated plastic
$13.99
3'' x 5/16'' Bore Cooler Wall Coupling Assembly, Chrome Plated
3” shank for jockey box. Material: Brass Finish: Chrome Plated Brass Length: 3" Bore ID: 5/16" Thread Size: 5/8" - 14 BSP Important information: Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
$14.99
1/4'' NPT Plug
1/4" NPT plug, left hand threads, Allen socket head, for primary regulators
$1.75
1.6'' Diaphragm Regulator Repair Kit
This kit contains everything you need to service your 3700 series TapRite regulator after years of use. It includes a 1.6" diaphragm, capsule, and tank nipple o-ring which are the most common wear and leak points.
$19.99
Replacement PRV (65 psi)
Replacement pressure relief valve rated to blow at 65 psi. This is a direct replacement of the PRV featured on the KOMOS® CO2 regulator. The Green PRV can also be used with pressurizable FermZilla models for hydro testing. Note that under normal operation, the FermZilla should always be used with the Red PRV (35psi).
$6.49
Insert, Tank Plug, Ball (Old-Fire)
Fits tank plugs for John Wood and old style Firestone Challenger tanks.
$2.50
European Sanke Keg Coupler - S Style
Keg coupler (tavern head) for S-system (Euro-Sanke, Heineken) kegs. Includes integrated washer/check valve and nut on the gas in side. Nut, nipple, and washer assembly included for both gas and beer inlet/outlet. Nickel coated body with stainless steel probe. This item does not come with a pressure relief valve.
$45.99
3-Way Beer Manifold
Material: Stainless Steel 304 Mounting Bracket: Integrated Inlet Connection: 1/2" O.D. Barb Outlet Connection: 7/8" - 14 (5/8" BSP)
$69.95 $39.99
Brass Faucet Lever
Brass faucet lever replacement for most standard U.S. draft faucets.
$2.99
Black Cap Plug CMB Disconnects
Replacement black cap plug for CMB ball lock disconnects.
$1.25
Growler Filler - Older Perlick/Perl Faucets Models
304 stainless steel faucet insert with 12 inches of 5/16" ID draft tubing. This insert fits into older styles of Perlick and Perl faucets.
$9.99
Check Valve with Insert
Non-return check valve with insert. Commonly used in U and G system couplers.
$3.49
Sanke Pump Adapter
For use on Sanke pumps. Material: Brass Finish: Chrome Plated Brass Thread Size: 5/8 BSP
$4.95 $3.99
Pump Connector with 3/8'' Hose Barb
Connects any picnic pump to CO2 inlet side of coupler. Material: Brass Finish: Chrome Plated Brass Barb: 3/8" Length: 5/16"
$4.95 $3.99
Faucet Lock, Wrap Around, Krome
Made from chrome plated brass, this lock is easy to remove and install on your faucet. It features a hardened steel locking hasp and lock that are keyed alike, a brass tumbler, and two keys.
$34.95
Faucet Bonnet, Chrome
Faucet bonnet, chrome plated brass.
$1.95
Beer Faucet Tap Ferrule - Gold
Use with a hanger bolt to attach to a wooden tap handle. This ferrule has 5/16” top threads and 3/8” bottom threads.
$4.50
Gas Ball Lock, SS Barbed
304 Stainless steel ball lock gas (in) connector with 1/4" barb connection.
$21.99
Faucet Lever Collar, Chrome
Replacement chrome plated faucet lever collar.
$2.99
Faucet Shaft Assembly
Draft faucet shaft assembly with seat. 304 stainless steel.
$12.99
45 degree 1/4" Swivel Elbow
45 degree barbed swivel elbow stem and nut. Specifications: Barb with fit 1/4" ID tubing. Nut is a 1/4" flare fitting. 304 Stainless Steel.
$4.49
KOMOS® Rubicon Cold Plate Jockey Box (2 Tap)
The KOMOS Rubicon Jockey Box is perfect for low-volume home applications like picnics, cookouts, and tailgaters. Built around the ultra-tough, rotomolded Rubicon Cooler and featuring the aluminum cast Slimline cold plate for compact, efficient cooling. The cooler comes with pre-drilled holes and only takes minutes to assemble. Along with the cooler and cold plate, this draft box kit includes stainless steel Intertap faucets, stainless shanks, self-closing faucet springs, tap handles, EVABarrier draft line, and Duotight fittings for all connections. Rubicon CoolerRotomolded body makes this cooler virtually indestructible, while high density polyurethane insulation and compression lid will keep the contents ice-cold for days on end. Rope handles with molded grips make the Rubicon easy to move around, and lockable lid will keep out beverage bandits and bears alike. Slimline Cold PlateThe KOMOS Slimline Cold Plate is made from rugged aluminum casting with a large thermal mass for excellent heat absorption. High conductivity aluminum alloy aids the heat transfer as your beverage travels through the internal 18 ft. long stainless steel lines. Duotight Fittings & EVABarrier Draft Tubing Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing. EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. We recommend adding Duotight fittings to use for your keg connections as well, not included. Features: Rubicon Cooler Rotomolded body High density polyurethane insulation Lockable compression lid with high quality seal Polyester rope handles with molded grips Rubber feet Side drain outlet 23.5" x 16.25" x 16.5" Slimline Cold Plate Aluminum cast 18 ft. internal lines made from 304 stainless steel 1/4" male flare connections 15" x 10" x 1" 2 x Intertap Stainless Faucets w/ Self-Closing Springs 2 x Intertap Stainless Draft Shanks 2 x Black Plastic Tap Handles 39 ft. roll of EVABarrier tubing (8 mm OD x 5mm ID) Duotight push-in fittings for all connections
$399.99
Tubing Quick Disconnect, 1/4'' barb x Male
Male quick disconnect with a 1/4" female barb. Includes a shutoff that seals the valve when not connected to tubing.
$9.99
Tower Surface Drip Tray with Drain
Made from 304 stainless steel, 12" x 7" x .75" drip tray with drain assembly. This will fit a 3" beer column.
$44.99
Surface Drip Tray 14"x6", Stainless Steel, w/o Drain
Stainless Steel 14"x6" drip tray without drain. Stainless steel with brushed finish. Robust 18 gauge Stainless Steel construction. Finished smooth for safety and appearance with welded corners. Removable grill for easy manual cleaning.
$34.99
SS304 Cooling Coil - 50' x 5/16'' OD
304 Stainless Steel Cooling Coil. Includes grommets, ferrules, and hex nut fittings for easy connection to shanks. Specifications: Material: Stainless Steel 304 Size: 50ft x 5/16" OD (Tube) Diameter: 5.25" (coil) Height: 6.75" (coil)
$99.99
Duotight - 9.5 mm (3/8 in.) Joiner
This Duotight joiner fitting is compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$2.99
Coupler and Hex Nut Wrench
Keg coupler probe and hex nut wrench
$9.95
Tower Surface Drip Tray w/o Drain
Stainless steel cut out surface mount drip tray with brushed finish 16 gauge stainless steel construction Finished smooth for safety and appearance with welded corners Removable grill for easy cleaning 12"L x 7"W x .75"D Will fit a 3" beer column
$34.99
Stainless Steel 12''x5'' Drip Tray, no drain
Surface mount drip tray without drain. Stainless Steel 12" x 5" Made in USA
$29.99