Draft Supplies
2" Connector Nipple - 1/4" NPT
Use to connect secondary regulators 1/4" NPT x 1/4" NPT Right hand thread
$6.99
Premium Plus Regulator Service Kit
Rebuild a Micro Matic Premium Plus Series Regulator with this 7-piece service kit. Includes the disassembly torque tool. Included: (1) Tamper evident cap (1) Cartridge bolt (1) Lock ring (1) Diaphragm (1) O-Ring (1) Disassembly torque tool (1) Instructions
$39.99
Duotight 8mm Inline Plastic Regulator
These regulators work great for reducing your main pressure from 0-150 psi. Suitable for both gas and liquid. The 8 mm Duotight inlet and outlet are compatible with EVABarrier tubing. Specifications: Pressure Range: 0–150 psi Suitable for mains water pressure Liquid and gas compatible Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Wall mountable Made from non-corrosive acetyl, nitrile, and stainless parts
$9.49
Wall Mount Flange
Shank mounting flange, 2" diameter, with 1/4-20 set screw.
$10.99
Regulator Bonnet Gasket
Replacement bonnet gasket for regulator. 2" outer diameter.
$3.50
Mini CO2 Regulator
Portable, mini, two stage co2 regulator with a range of 7-21 PSI. This regulator uses 74g cartridges and provides constant pressure to your vessel. Cartridges not included.
$69.99 $54.99
Duotight BlowTie Diaphragm Spunding Valve
The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style spunding valve is much more accurate than the poppet style. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing. The blow off pressure can be set by either pairing the BlowTie with the Push-In Pressure Gauge, or by attaching it to an empty keg that has been pressurized to the desired psi. Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends 0-40 psi pressure rating
$14.99
4.5'' Cooler Wall Coupling with 3/8'' Bore
4.5" jockey box wall coupling with 3/8" bore. Material: Brass Finish: Chrome plated brass Length: 4.5" Bore ID: 3/8" Thread Size: 5/8"- 14BSP Important information: Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
$18.99
3'' Special Cooler Wall Shank, (5/16'' x 1/4'' ), SS
3" Special Shank Assembly for Jockey Box. Material: Stainless Steel Bore: 1/4" x 5/16"
$23.99
24'' Wall Shank Assembly
24" beer shank assembly allows you to dispense thru a wall. Chrome plated brass, bore ID 3/16”, thread size 5/8”- 14BSP.
$39.99 $24.99
2'' Flat Seal, Regulator Repair Kit
Regulator repair kit for 2" diaphragm Taprite co2 regulators (series 740, series 1660, series 5260, series 5740). Includes diaphragm, capsule, and flat tank seal.
$19.99
Connector Nipple, 2" x 1/4" NPT
This brass nipple is 2" in length and has 1/4" NPT, right hand threads (rht). It is commonly used for connecting regulators and air distributors/manifolds.
$4.99
Pressure Gauge
This pressure gauge can be used while pressure fermenting, briting or pressure transferring. Specifications: 0-30psi 2" Dial 1/4"npt **This accessory is to only be used with the FLEX+ or the upgraded high pressure lid**
$15.00
3'' Chrome Plated Cooler Wall Shank
3" chrome plated special cooler wall shank with 1/4" x 3/8" bore. Specifications: Finish: Chrome PlatedBody: Material BrassLength: 3-1/8"Bore ID: 1/4" x 3/8"
$17.99
Faucet Shank Locking Ring
Faucet shank locking ring
$0.50
Replacement PRV (17 psi)
Replacement pressure relief valve rated to blow at 17 psi. Fits FermZilla and Kegmenter. It is also compatible with homebrew kegs and the KOMOS® CO2 regulator if you desire a lower blowoff pressure.
$6.99
Stainless Beer Thread Adapter | 2 pack | Female Beer Thread x 1/2 in. BSP | KOMOS®
Convert draft shanks or keg couplers for use with 1/2" female threaded fittings. Featuring a hex nut exterior for easy wrench adjustments. The female side is standard beer thread which is used on both ports of standard keg couplers and the tail end of draft shanks. Once installed, you can adapt these input/output ports to any 1/2" fittings and valves you might find useful. The 1/2" male BSP end may require teflon tape if used with 1/2" NPT fittings. Comes in a pack of 2
$9.99
Duotight Ball Lock Quick Disconnect (9.5mm) - Gas In
The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world. Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required This particular ball lock disconnect has been designed for use with EVABarrier 9.5 mm OD Tubing. Due to the integrated Duotight fitting the line will simply push directly into this fitting. Ball Lock Quick Disconnect - Gas In Direct connect 9.5 mm OD EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Disassemble by hand for quick and easy cleaning Duotight Ball Lock QDs are offered in three sizes that correspond to the outer diameters seen on our line of EVABarrier Draft Tubing. 6.35 mm OD – features a very tight 3 mm ID that requires only 3.2 ft of length for adequate flow resistance. This is the ideal size for mobile draft or if you want to keep your kegerator as tidy as possible. 8 mm OD – the most common OD size of EVABarrier tubing. This size comes in two IDs (4 mm & 5 mm) and pairs up with the lion's share of Duotight fittings and accessories. 4 mm ID is our most recommended size for beverage lines, requiring 5-6 ft. lengths. 5 mm ID is commonly used as gas line or when 10-12 ft. beverage lines are required. 9.5 mm OD – suitable for gas lines or long draw beverage lines. At 6.3 mm ID, this size is ideal for beverage lines that will be 20 ft. or longer in length.
$7.99
3-Way Gas Manifold
3-way horizontal gas manifold without safety pressure release. 3/8" barbed inlet (3) 5/16" barbed shut-offs Shut-offs do not include check valves Aluminum body
$44.99
Tank Plug, Liq/Ball (Wood/Old-Fire)
Fits John Wood and old style Firestone ball lock tanks. Thread size 3/4 - 18, plastic insert included.
$24.00
Pin Lock Body Connect 3 Pin Liquid-Out
Liquid out pin lock (3 pin) body connect. 19/32" - 18 pitch thread.
$14.95
Pin Lock Body Connect 2 Pin Gas-In
Gas in pin lock (2 pin) body connect. 19/32" - 18 pitch thread. Poppet valve is not included.
$9.99
Keg Spear Locking Disc
Locking disc for Sankey D type keg spears. Sankey D Spear Exploded View
$4.95
Keg Spear Body O-Ring
Keg spear body o-ring for Sankey D and Sankey S type spears. Sanke D Spear Exploded View
$0.95
'U' Style Guinness Tap
This Guinness, "U Style" keg coupler is manufactured by Micro Matic, a leader in the beverage dispensing industry. It is most commonly used to tap Guinness beers but will usually fit Abby White, Boddingtons Pub Ale, Harp, Kilkenny, Leffe, Magners, and Smithwicks Ale. Features: Well-type connection Stainless steel probe Easy to engage handle: push down to tap/pull up to untap
$79.99
Firestone / Challenger Ball Lock Gas Post
- Tank Plug, Ball-Lock (gas)- For Firestone V & VI Challenger and Super Challenger Tanks- 9/16 - 18 Thread size- Plug includes Poppet and O-Ring.
$19.95
Corny Lid Boot (Cap), A.E.B
Helps protect your keg from scratches from your lid.
$0.75
6-Way Modular Gas Manifold
This modular gas manifold will allow you split one CO2 line to six of them. Each line can be turned off individually without affecting the flow to other kegs. Each ball valve contains a check valve that ensures no beer or gas can flow between the two kegs. The barbs are all 5/16" which is standard for gas line in the beer industry. If later, you decide to add an additional keg this manifold can be expanded using the Add On Assembly.
$69.99
Faucet Lock, Wrap Around, Fits Perlick
Specially designed lock to fit Perlick taps. Secure unauthorized beer handling with this beer faucet lock. The U hasp wraps closely around the faucet tap handle and beer inlet. This leaves no space to move the handle. So can’t open the faucet and hence no beer flows out either. Lock made of Chrome plated Brass and comes with two-set alike keys. Use with Perlick taps only. Chrome plated Brass lock with 2 alike keys set Locks the tap handle to the faucet body in close position. Cannot move and open the tap with the lock around. Eliminates underage access to your draft beer setup. Tamper proof and extremely easy to install and remove. Also fits stainless steel Intertap faucets
$36.95
Non-Return Torpedo Valve
Replacement non-return torpedo valve for keg couplers. Similar to a check ball but more commonly found in A, G, and U style couplers. This valve prevents beer in the line from returning to keg.
$4.99
Gray Cap Plug CMB Disconnects
Replacement gray cap plug for CMB ball lock disconnects.
$1.25
Check Valve for Party Pump
Replacement check valve for Micro Matic party pumps. For Micro Matic HP-100, 300, 500, 700 & 900 series pumps.
$2.49
Piston Rod O-Ring
Replacement piston rod 0-ring for the Micro Matic 4" and 8" chrome pumps. Dimensions: O.D. 1-7/16" I.D. 1-3/16" x W. 1/8"
$2.49
Intertap Standard Stainless Steel Spout
Standard stainless steel spout replacement for Intertap and Nukatap faucets.
$5.99
Probe Washer, European & Perlick Couplers
Replacement probe washer for Perlick and European style couplers.
$2.99
Perlick Ball Retainer
Ball retainer for Perlick couplers.
$1.95