Draft Supplies
Flow Control, Self Closing Stainless Steel Faucet
Taprite's Variable Flow Control Faucet allows you to adjust your beer flow with a lever right on the faucet, eliminating foaming problems when your beer lines, temperature, or pressure cannot be adjusted to account for multiple beer styles. The self closing feature prevents the accidental loss of beer. The 304 stainless steel interior will not errode or leach metallic flavors into your perfectly poured beverage. The 304 stainless steel exterior is highly polished for a sparkling, mirror finish. Stainless shank assembly (1.75"), stainless in-line compensator, and black faucet handle are included.Special Features: Flow Adjustment Lever, Self Closing, In-Line Flow Control Compensator, Stainless Steel Shank IncludedFaucet Material: Stainless Steel, 304Flat Mount Recommended
$114.99 $89.99
Faucet Spout Extension
Used to convert a U.S. faucet spout to European style faucet spout. Helps to reduce foam Pours faster Fits snug in standard US tap spout Faucet not included.
$15.99 $9.99
Check Ball Retainer, Sanke (U,G,A)
Ball Retainer, Sankey Coupler (Probe)
$0.70
Bass Tap, G System
TOF® Import Beer Keg CouplersTOF® has been certified ISO 9001 since 1997 and produces quality keg couplers For use with but not limited to: Watneys Anchor Fuller's Features G-System Coupler Brass Body NSF 61 Galvanic Food Coating INOX AISI 300 S/S Probe Pressure Relief Valve Will also fit:Abbot AleAnchor Liberty AleAnchor PorterAnchor SteamBass Pale AleBlackthorne CiderCaffrey'sFuller's ESBFuller's London PrideGrolschOld Speckeled HenRougeScottish TennentsSir Perry William'sWatney'sYoung'sYoung's Chocolate StoutYoung's Oatmeal StoutYoung's Ram Rod BitterYoung's Special London Ale
$79.95
EVABarrier Double Wall Draft Tubing - 3 mm ID x 6.35 mm OD | 39 ft. Roll
EVABarrier double wall tubing is an excellent choice for all draft dispensing applications. The inner barrier is an excellent gas barrier, keeping oxygen out and CO2 in. The inner wall is also extremely smooth to prevent bacteria and other microbes from attaching to the inside surface. The outer barrier gives the tubing a decent stiffness while still remaining pliable. This makes EVA Barrier remarkably kink resistant and the perfect choice for use with Duotight, John Guest, and other push-in fittings. The 3 mm (5/32") ID size is perfect for mobile draft applications or home draft systems where only a short beverage line is needed. Lengths of 3.2 ft. per line are all that you'll need for adequate flow resistance.' This tubing works seamlessly with Duotight Gas In and Bev Out Ball Lock QDs which allow you to connect your draft lines directly to your ball lock homebrew keg. Be sure to select the correct size QD fittings that correspond to your tubing's outer diameter (OD). Specifications: Inner Diameter - 3 mm (1/8") Outer Diameter - 6.35 mm (1/4") PVC, BPA, and Plasticizer Free* Stiff outer wall is kink resistant and easy to use with Duotight fittings Smooth inner wall prevents oxidation, CO2 loss and microbial growth build-up *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects.
$18.89
Duotight Push-In Fitting - 9.5mm (3/8 in.) Female Bulkhead
This Duotight fitting is designed to go through the wall of a tank, housing, or wall, similar to a pass through shank, so you can run EVABarrier tubing from one side to the other. Compatible with EVABarrier 9.5 mm OD tubing. With the lock nuts in place, there is approximately 1" of pass through threading. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.
$3.49
Elbow Tailpiece, 5/16'' Barb, Stainless Steel
Stainless steel elbow tailpiece with 5/16" OD Barb
$5.99
Monotight Push-In Fitting - 6.35 mm (1/4") Female x 6.35 mm (1/4") Male Elbow
The Monotight Elbow Piece is suitable for 6.35 mm (1/4") PE tubing or most lines with a 6.35 mm outer diameter. It is designed for use with stiff PE tubing that is commonly used in water treatment equipment, water filters, reverse osmosis fittings, and other appliances that are directly connected to water lines. These fittings will not fit 8 mm or 9.5 mm OD EVABarrier line Monotight push in fittings have been engineered for maximized performance in both gas and liquid applications. No other push ins on the market have EPDM o-rings. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-ring made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.
$1.99
Co2 Disconnect Tailpiece
If you use different kegs and couplers on a normal basis, save time by add quick disconnects to your draft systems gas line tubing. Place a quick disconnect fitting in the gas line and no tools are needed to disconnect from the gas source. Simply pull back the sleeve on the female side and the connection separates and the gas is shut off. Note: To make a complete set please order the Disconnect Air Coupler. Specifications: Connection: Male Side Length: 1-1/4" Barb: 3/8" O.D. (to fit 5/16" I.D. Gas Hose) Material: Brass (not chrome plated)
$9.99
Stainless Steel 6''x5'' Drip Tray, no drain
Surface mount drip tray without drain. Stainless Steel 6" x 5" Made in USA
$24.99
Pin Lock Socket
13/16" socket with cut outs for your pin lock keg posts.
$19.99
Grommet for 5/16'' ID SS Tubing
Rubber grommet for chrome plated brass ferrule with 5/16" ID bore.
$1.95
Faucet Handle, Black Knob
Black knob handle that will fit on a faucet or a party keg coupler pump.
$3.95
Faucet Handle Extension
Add height to your faucet handle with a 1" extension. Material: Brass Finish: Chrome Plated Brass Length: 1" Extension Thread Size: 3/8" x 16 UNC
$6.99 $4.99
Elbow Tailpiece, 3/8'' Barb, Stainless Steel
Stainless steel elbow tailpiece with 3/8" Barb
$6.95
Duotight 9.5 mm (3/8 in.) x Female Beer Thread
This Duotight to Female Beer Thread fitting is perfect for connecting gas line to keg couplers. Although it could be used with 9.5 mm EVA Barrier as a beverage line, this would only be recommended for long draw systems where the beverage line will be 20-25 ft long. Compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$4.49
Chrome Plated Brass Ferrule for 5/16'' ID SS Tubing
Brass ferrule for jockey box cooling coil. Chrome plated brass with a 5/16" ID bore.
$3.50
Kegland Replacement CO2 Tank Knob
This replacement knob is for Kegland branded CO2 tanks. It is compatible with 2.5 - 20 pound tank sizes.
$4.99
2.5lb Co2 Aluminum Cylinder - Empty
2.5 pound aluminum CO2 cylinder. Ships empty. Will dispense approximately 4-5 five gallon kegs before needing to be refilled.
$65.99
Tapcooler Beer Valve Keg Connector
Want to bottle directly from your ball or pin lock keg using the Tap Cooler Counter Pressure Bottle Filler? This beer valve connector tube assembly will allow you to do just that! Setup is a snap. Simply remove the faucet fitting on the Tapcooler filler, attach the valve end, attach a ball (or pin) lock connector into the included swivel nut set on the tubing, and hook to your keg, and get to bottling! The valve acts as the beer faucet normally would, starting and stopping flow directly from the keg. The attached tubing is 2 meters (about 78 inches) long, giving you plenty of versatility in your bottling range. Another great accessory from Tapcooler! Tapcooler and ball lock disconnect not included.
$39.99
Tapcooler Filler Extension Tube
The Tapcooler extension tube is perfectly suited to provide the counter pressure filler a bit of extra space for the bottles where there is not enough room to fit them directly under the tap. The one end of the connection hose is designed to screw into the top of the filler unit and the other end of the tube is designed to screw into the filler unit's removable tap nozzle insert. Includes two small o-rings to seal the extension line on either end (there is already an o-ring seal inside the filler unit when the tap nozzle insert is removed). Tubing (based on length chosen) Stainless steel faucet fitting Stainless steel Tapcooler fitting Required o-rings for sealing purposes Comes pre-assembled!
$17.99
Chrome Plated Brass Ferrule for 1/4'' ID SS Tubing
Brass ferrule for jockey box cooling coil. Chrome plated brass with a 1/4" ID bore.
$3.50
BeerGun® Tip: version 2
Replacement BeerGun® tip for version 2 units.
$2.50
10lb Co2 Aluminum Cylinder - Empty
10 pound aluminum CO2 cylinder. Ships empty. Will dispense approximately 18 five gallon kegs before needing to be refilled or exchanged. Dimensions: 20.75" Tall x 7" wide.
$124.99
Duotight 9.5 mm (3/8 in.) x 1/2 in. BSP Ball Valve
This Duotight ball valve with 1/2" male thread is perfect for attaching to the water input on the Copper Counterflow Chiller, allowing you to adjust the water flow while chilling your wort. Compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$4.49