Draft Supplies
Faucet Handle Extension
Add height to your faucet handle with a 1" extension. Material: Brass Finish: Chrome Plated Brass Length: 1" Extension Thread Size: 3/8" x 16 UNC
$6.99 $4.99
Elbow Tailpiece, 3/8'' Barb, Stainless Steel
Stainless steel elbow tailpiece with 3/8" Barb
$6.95
Duotight 9.5 mm (3/8 in.) x Female Beer Thread
This Duotight to Female Beer Thread fitting is perfect for connecting gas line to keg couplers. Although it could be used with 9.5 mm EVA Barrier as a beverage line, this would only be recommended for long draw systems where the beverage line will be 20-25 ft long. Compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$4.49
Coupler and Hex Nut Wrench
Keg coupler probe and hex nut wrench
$9.95
Chrome Plated Brass Ferrule for 5/16'' ID SS Tubing
Brass ferrule for jockey box cooling coil. Chrome plated brass with a 5/16" ID bore.
$3.50
Faucet Cleaning Attachment - 3/8" barb
With this beer faucet cleaning attachment, you can make sure that your beer lines undergo thorough cleaning and washing. You only need to connect this beer faucet cleaning attachment to a pressurized tank of beer-line cleaner to get the best results. Remove the faucet from the shank at the end of the line to be cleaned, and install this beer faucet cleaning attachment in its place. Then, pump the beer-line cleaner through your beer lines until they are thoroughly cleaned and free from dirt, grime, beer stone, and other contaminants. FEATURES Easy-to-attach beer faucet cleaning attachment Beer faucet cleaner attachment made of heavy-duty metal Meets U.S. industry standards Thread: 1-18"-18 Barb: 3/8" Includes washer
$10.99
Kegland Replacement CO2 Tank Knob
This replacement knob is for Kegland branded CO2 tanks. It is compatible with 2.5 - 20 pound tank sizes.
$4.99
2.5lb Co2 Aluminum Cylinder - Empty
2.5 pound aluminum CO2 cylinder. Ships empty. Will dispense approximately 4-5 five gallon kegs before needing to be refilled.
$65.99
Tapcooler Beer Valve Keg Connector
Want to bottle directly from your ball or pin lock keg using the Tap Cooler Counter Pressure Bottle Filler? This beer valve connector tube assembly will allow you to do just that! Setup is a snap. Simply remove the faucet fitting on the Tapcooler filler, attach the valve end, attach a ball (or pin) lock connector into the included swivel nut set on the tubing, and hook to your keg, and get to bottling! The valve acts as the beer faucet normally would, starting and stopping flow directly from the keg. The attached tubing is 2 meters (about 78 inches) long, giving you plenty of versatility in your bottling range. Another great accessory from Tapcooler! Tapcooler and ball lock disconnect not included.
$39.99
Tapcooler Filler Extension Tube
The Tapcooler extension tube is perfectly suited to provide the counter pressure filler a bit of extra space for the bottles where there is not enough room to fit them directly under the tap. The one end of the connection hose is designed to screw into the top of the filler unit and the other end of the tube is designed to screw into the filler unit's removable tap nozzle insert. Includes two small o-rings to seal the extension line on either end (there is already an o-ring seal inside the filler unit when the tap nozzle insert is removed). Tubing (based on length chosen) Stainless steel faucet fitting Stainless steel Tapcooler fitting Required o-rings for sealing purposes Comes pre-assembled!
$17.99
Chrome Plated Brass Ferrule for 1/4'' ID SS Tubing
Brass ferrule for jockey box cooling coil. Chrome plated brass with a 1/4" ID bore.
$3.50
BeerGun® Tip: version 2
Replacement BeerGun® tip for version 2 units.
$2.50
$1.25
10lb Co2 Aluminum Cylinder - Empty
10 pound aluminum CO2 cylinder. Ships empty. Will dispense approximately 18 five gallon kegs before needing to be refilled or exchanged. Dimensions: 20.75" Tall x 7" wide.
$124.99
1/4'' Swivel Nut for 5/16'' Barb
Flare nut, 1/4 (for 5/16b)
$1.00
Duotight 9.5 mm (3/8 in.) x 1/2 in. BSP Ball Valve
This Duotight ball valve with 1/2" male thread is perfect for attaching to the water input on the Copper Counterflow Chiller, allowing you to adjust the water flow while chilling your wort. Compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$4.49