Plastic Fermenters
Speidel Replacement Cap
Replacement cap and cap gasket for Speidel plastic fermenters.
$4.99
Speidel Fermenter Lid Gasket 20L/30L
Replacement Lid Gasket for Speidel Plastic Fermenters 20L (5.3 gal) & 30L (7.9 gal)
$5.49
Replacement Spigot for Speidel Plastic Fermenters
Spigot and collar replacement for Speidel plastic fermenter.
$8.99
20 Gallon Wine Fermenter Lid
Lid for the 20 gallon trash can style fermenter. Please note that this lid is not meant to seal airtight.
$16.99
Replacement Flat Lid for FermZilla
Replacement Flat Lid for FermZilla. Includes o-ring. Fits all models and sizes of FermZilla fermenters.
$11.00
The BrewBelt
The BrewBelt is an adjustable heating belt that wraps around a 7-8 gallon plastic pail or a 6 gallon single-stage plastic fermenter. It will maintain 6 U.S. gallons of fermenting beverage at a constant brewing temperature, approximately 75-80 degrees Fahrenheit for a period of up to 8 days. 120 VAC, 20 Watts Warnings: Do Not use this product on glass carboys or demijohns, metal, or wooden fermenters. Do Not use the belt if the room temperature rises above 75-80 degrees Fahrenheit. Do Not cover the belt with a blanket or any other covering. This may cause the belt to overheat. Do Not stretch or twist the belt to prevent slack on the pail. This may rupture the internal heating element. Do Not store flammable objects near the belt while in use. Do Not leave the belt plugged in for more than 8 consecutive days or until the S.G. (specific gravity) drops below 1.010, whichever comes first.
$29.99
32 Gallon Wine Fermenter Lid
Lid for the 32 gallon trash can style fermenter. Please note that this lid is not meant to seal airtight.
$18.99
FermZilla - Replacement Lid O-Ring
Replacement Lid O-Ring for FermZilla for all models and sizes of FermZilla fermenters.
$3.30
Tri-Clamp Pressure Lid for FermZilla
Upgrade your FermZilla Conical or All Rounder with the new 2" Tri-Clamp Lid from KegLand. Add yeast, hops or even take samples from a wine thief from the top and not have to remove the entire lid. This particular lid was designed in order to suit a growing number of customers desire to dry hop without exposing the batch to oxygen from opening the lid. By using this lid in conjunction with the FermZilla 2" Butterfly Valve and Hop Bong Kit, you will be able to purge CO2 into the tube and expel all the oxygen inside it and dump freely into the vessel. Features: (2) PCO1881 Male Ports Recommended for use with Red (Gas In) & Yellow (Bev Out) Ball Lock Caps PRV Port with Red 35 psi (2.5 BAR) PRV 2" T.C. Ferrule Undrilled Ports (for optional accessories): Thermowell Port (for FermZilla Thermowell kit) (2) Temp Twister Ports Please Note: Temp Twister will need to be bent on a 20° Angle in order to fit on the curved lid and align vertically in the tank. Also includes: 2" Tri-Clamp 2" T.C. Gasket 2" T.C. x PCO1881 Male Thread Cap Warning: Always depressurize your system COMPLETELY before removing fittings from your fermenter. Warning: Only use Red 35 psi PRV with this lid. Ensure the PRV is cleaned and dried of sticky residue before each fermentation. Failure to do so could cause injury and void warranty.
$44.00
Hop Bong Sight Glass - 2 in. T.C.
The Hop Bong is a versatile pressurizable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters, but also as an inline carbonation/oxygenation accessory. This particular sized tri-clamp Hop Bong was designed for the FermZilla Tri-Conical and All Rounder fermenters with the new Tri-Clamp Adapted Pressure Lid. It can also be adapted to any 2" T.C. port in your system to use either inline or as a dry hopping device. The side port features PCO1881 male threads so you have the option to add a Ball Lock Cap. When used as a dry hopping device on top of your fermenter, this will allow you to purge your additions of oxygen by flushing them with CO2. When used as a sight glass below your fermenter, bubble CO2 from the bottom up via the Ball Lock Cap to rouse hops or carbonate finished beer. Constructed from Nylon 12: An autoclavable, extremely robust, and chemical resistant engineering plastic. Hop Pellet Capacity: 150–180g (5.2–6.3 oz)
$27.50
Wine Fermenter Dolly
This dolly fits the 20 gallon and larger trash can style wine fermenters. This dolly is made from tough plastic and features five sturdy casters. It locks onto the bottom of the wine fermenters allowing for easy transport.
$59.99
Hop Bong Sight Glass - 1.5 in. T.C.
The Hop Bong is a versatile pressurizable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters, but also as an inline carbonation/oxygenation accessory. This particular sized tri-clamp Hop Bong was designed for the BrewBuilt X-Series Uni Conical fermenters for their 1.5" T.C. lid port. The side port features PCO1881 male threads so you have the option to add a Ball Lock Cap. When used as a dry hopping device on top of your fermenter, this will allow you to purge your additions of oxygen by flushing them with CO2. When used as a sight glass below your fermenter (if your conical has a 1.5" bottom port, or if you use it along with a 2" x 1.5" reducer), bubble CO2 from the bottom up via the Ball Lock Cap to rouse hops or carbonate finished beer. Constructed from Nylon 12: An autoclavable, extremely robust, and chemical resistant engineering plastic. Hop Pellet Capacity: 80–120g (2.8–4.2 oz)
$22.00
Speidel Storage Lid Gasket
Replacement lid gasket for 60L-500L Speidel rectangular storage tanks.
$4.00
