Stainless Steel Fermenters

30 products


  • Food Grade Propylene Glycol 100% | One Gallon | CellarScience®

    Food Grade Propylene Glycol 100% | One Gallon | CellarScience®

    Out of stock

    Certified Food-Grade Propylene Glycol Inhibited Coolant 100% Concentrate for use in Glycol Cooling Systems in any Food Service application. Dilute with distilled water to the ratio specified in the instructions for your chiller. NSF Certified, food-grade inhibited propylene glycol fluid which is intended for use in antifreeze and heat transfer applications where contact with food may occur, such as wineries, micro-breweries, meatpackers, and other food-related industries.  Formulated with propylene glycol and an inhibitor system which is effective at preventing rust and corrosion in aluminum, brass, cast iron, copper, solder and steel-containing systems.  Operating Range: -50°F to 325°F (-46°C to 163°C) Application: HVAC system freeze/burst/corrosion protection Immersion freezing Cooling liquid foods Packaging carbonated beverages Fermentation cooling Refrigeration coil defrosting Cold room dehumidifying Conveyor roller defrosting Process cooling Process heating Waste heat recovery PLEASE NOTE: While Propylene Glycol is considered food grade this is not meant to suggest that it is safe for consumption. Always test your heat exchangers with water to check for pinhole leaks. In case of consumption please contact your local Poison Control Center immediately.

    Out of stock

    $54.99

  • Leg Extension Set Leg Extension Set

    Leg Extension Set

    1 in stock

    **Not for use with the CF30** The shorty leg extensions are 9” long (compared to 18”). They were specifically designed to be used with the 2” sight glass in the vertical arrangement. This was the major design criteria that Spike Brewing engineering noticed.The long leg extensions were specifically designed to bring the racking port to a height where the conical can be gravity drained into a 5 gallon corny keg. However they are pretty long for those people that do not need to gravity transfer but want the conical high to use a sight glass for example. *It is recommend to use the standard or extended bracing shelf when using the leg extensions for added stability* Shortly leg extension specifications:  304SS 9" long Top threads for attaching to conical legs Bottom threads for attaching leveling feet and casters Long leg extension specifications:  304SS 18" long Top threads for attaching to conical legs Bottom threads for attaching leveling feet and casters

    1 in stock

    $45.00 - $60.00

  • Closed Pressure Transfer Kit

    Closed Pressure Transfer Kit

    Out of stock

    Introducing another cool accessory to compliment Spike Brewing CF series conicals. Their closed pressure transfer kit (CPT kit) will allow you to rack your beer from your conical to keg without exposing it to oxygen. This will help you avoid off-flavors that can be caused by oxygen coming in contact with your beer.  The Spike Brewing CPT kit uses all stainless hardware and Ultra Barrier tubing which is antibacterial due to its silver lining. It is also BPA free and over-sized to promote a quick transfer from conical to keg. CPT Kit Includes: 1.5" TC to flare 1.5" TC clamp 1.5" TC gasket Flare to liquid ball lock Gas ball lock blow off The Spike Brewing gas manifold bundle can be seen HERE.**Always use a 15psi pressure relief valve when pressurizing a tank****

    Out of stock

    $65.00

  • Flex+ Flex+

    Flex+

    1 in stock

    FLEX+ FERMENTER Introducing the new Spike FLEX+! The FLEX+ was designed to be the most versatile, upgradable and longest lasting small batch fermenter on the market. With currently over 20 accessories (and counting) you'll never run out of run toys to bling your FLEX out with. The FLEX+ is the big brother to the standard FLEX. Out of the box it features an upgraded tri-clamp racking arm, tri-clamp butterfly valve and upgraded high pressure lid and clamp that can handle up to 15 psi. The higher pressure rating allows for carbonating your beer in the same tank you fermenter in. Carbonate your beer in 24hrs opposed to 7 days!All hardware shown HERE is included! Flex Features: 304 stainless steel; 1.2mm (18ga) All sanitary welded ports (no-weldless fittings) Designed for 2.5 to 6 gallon batches 7 gallon total capacity 15 psi working pressure Use for pressure transfers Use as a brite tank Etched volume markings Fully polished finish Dimensions: 15" wide by 21¨ tall (to top of airlock) See additional dimensions here Lid Features: 4" TC modular top port Allows for hop additions, temp control coil, top sight glass, etc Three 1.5" TC ports which allow for:  Blow Off Port – Dedicated port for an airlock or blow off tube Hop Port – Dedicated port for adding hops PRV Port – Dedicated port for your pressure relief valve (PRV) Stainless band clamp for attaching the lid Completely removable lid for easy cleaning Body Features: 1.5" TC racking port with rotatable racking arm 1.5" TC secondary port for thermometer, sample valve, etc Limited availability in store.  Drop ships from vendor.

    1 in stock

    $450.00

  • Stainless Bucket Fermenter with Heating - 35L Stainless Bucket Fermenter with Heating - 35L

    Stainless Bucket Fermenter with Heating - 35L

    1 review

    2 in stock

    If you've been looking to step up from fermenting in plastic buckets or carboys, this is an excellent choice for your next fermenter. Stainless steel is a much better option than glass or plastic, as it is extremely easy to clean and virtually lasts forever. There's also much less chance of contamination as stainless doesn't scratch like plastic. Over time, you'll get scratches in plastic fermenters from normal wear and tear, creating microscopic havens for bacteria. Meanwhile, glass carboys are always at risk of breaking which is something you will never have to worry about with stainless steel. The Bucket Buddy represents a great value for a stainless fermenter in this size. Another advantage over carboys and plastic buckets is the domed base inside the fermenter which is great for yeast flocculation when fermentation is complete. The included racking arm will make it easy to transfer out every last drop of beer while leaving the yeast cake undisturbed. The entire racking arm and ball valve assembly is weldless, which means you can remove the assembly to clean and sanitize it between batches. You can even boil the assembly for added assurance that it's been sterilized. This model has an integrated (concealed) 36-watt heating element. No need to worry about accessories such as heating belts and external temperature controllers. This stainless steel fermenter will keep your yeast at optimal temperature making it the ideal option for cold climates. To help maintain a steady temperature, the Bucket Buddy pairs well with either the BrewZilla Neoprene Jacket or the FermZilla Insulating Jacket. For cooling, you can place the fermenter in a dedicated refrigerator or drill into the lid to install a Temp Twister Cooling Coil. A temperature controller probe can then be taped to the side of the fermenter. This unit comes standard with silicone tubing to transfer from the ball valve to your bottles or cans, as well as a stopper and airlock for the domed lid. Specifications: Capacity: 35L Brimful Body Material: 304 Stainless steel Outlet Valve Type: Stainless steel, nylon bushings, silicone seal and stainless rotating rack arm. Thread on tap is 1/2" Lid: 304 Stainless steel Display: Digital temperature display Heating: 36 Watt Concealed Element Stopper & airlock included Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C External Dimensions: 28" H x 15" W (including handles) Internal Dimensions: 22" H x 11.75" W Includes a #3 rubber stopper

    2 in stock

    $179.99

  • Sale -19% Stainless Bucket Fermenter Stainless Bucket Fermenter

    Stainless Bucket Fermenter

    2 in stock

    If you've been looking to step up from fermenting in plastic buckets or carboys, this is an excellent choice for your next fermenter. Stainless steel is a much better option than glass or plastic, as it is extremely easy to clean and virtually lasts forever. There's also much less chance of contamination as stainless doesn't scratch like plastic. Over time, you'll get scratches in plastic fermenters from normal wear and tear, creating microscopic havens for bacteria. Meanwhile, glass carboys are always at risk of breaking which is something you will never have to worry about with stainless steel. The Bucket Buddy represents a great value for a stainless fermenter in this size. Another advantage over carboys and plastic buckets is the domed base inside the fermenter which is great for yeast flocculation when fermentation is complete. The included racking arm will make it easy to transfer out every last drop of beer while leaving the yeast cake undisturbed. The entire racking arm and ball valve assembly is weldless, which means you can remove the assembly to clean and sanitize it between batches. You can even boil the assembly for added assurance that it's been sterilized. Also available with built-in heating element for fermenting in colder environments. You can also use a heat wrap or heat belt on the outside of this unit. To help maintain a steady temperature, the Bucket Buddy pairs well with either the BrewZilla Neoprene Jacket or the FermZilla Insulating Jacket. For cooling, you can place the fermenter in a dedicated refrigerator or drill into the lid to install a Temp Twister Cooling Coil. A temperature controller probe can then be inserted into the thermowell to control your heating and cooling sources. This unit comes standard with silicone tubing to transfer from the ball valve to your bottles or cans, as well as a stopper and airlock for the domed lid. Specifications: 304 stainless steel construction 9 gallon total capacity Digital thermometer (Temp reads in °C) Weldless thermowell Stainless steel outlet valve with rotating racking arm Stopper & airlock included External Dimensions: 28" H x 15" W (including handles) Internal Dimensions: 22" H x 11.75" W Includes a #3 rubber stopper

    2 in stock

    $159.99 $129.99

  • Caster Kits Caster Kits

    Caster Kits

    Out of stock

    The Spike Brewing casters screw directly into the bottom of their conical legs for easy installation. The CF5, 10 and 15 use a 3" caster while the CF30 uses a larger 4" caster. CF5, CF10, CF15 Specifications: 3" caster wheel Set of 3 Non-marking wheel Locking brake + locking swivel  CF30 Specifications: 4" caster wheel Set of 4 Non-marking wheel Locking brake + locking swivel *Spike Brewing recommends a standard or extended bracing shelf when using the casters for added stability* Caster wheel install and instructions:Install + instructions

    Out of stock

    $40.00 - $63.00

  • Conical Extended Bracing Shelf Conical Extended Bracing Shelf

    Conical Extended Bracing Shelf

    5 in stock

    Spike Brewing's new custom Spike extended bracing shelf was a solution created based on customer feedback on their normal bracing shelf. The extended bracing shelf now widens the footprint of the conical making it more stable. It is a recommended addition when going vertical with the leg extensions or mobile with casters.  Features: 304SS Super thick 14ga material Made in the USA Welded support bars Includes 3 bolts to affix the conical to the bracing shelf Bracing shelf install and instructions:Install + instructions Additional accessories to add on: -Caster Wheels -Standard or Shorty Leg Extensions

    5 in stock

    $70.00 - $90.00

  • 857c41bc36ba2d1be4e16d321e3f15b7%2FFLEX-Front_Spike.jpg 857c41bc36ba2d1be4e16d321e3f15b7%2FSpike Flex Fermenter.jpg

    Flex

    1 in stock

    FLEX FERMENTER Introducing the new Spike FLEX! The FLEX was designed to be the most versatile, upgradable and longest lasting small batch fermenter on the market. With currently over 20 accessories (and counting) you'll never run out of fun toys to bling your FLEX out with. You can use the FLEX as a simple bucket fermenter with an airlock or add some accessories to get you all the way up to a 15 psi capable brite tank and anywhere in between!All hardware shown HERE is included! Flex Features: 304 stainless steel; 1.2mm (18ga) All sanitary welded ports (no-weldless fittings) Designed for 2.5 to 6 gallon batches 7 gallon total capacity 2 psi working pressure Strong seal to keep oxygen and bacteria out Use for pressure transfers to your keg or bottling bucket Etched volume markings Fully polished finish Dimensions: 15" wide by 21¨ tall (to top of airlock) See additional dimensions here Lid Features: 4" TC modular top port Allows for hop additions, temp control coil, top sight glass, etc Airlock port Body Features: 1.5" TC racking port with rotatable racking arm 1.5" TC secondary port for thermometer, sample valve, etc Limited availability in store.  Drop ships from vendor.

    1 in stock

    $290.00

  • 857c41bc36ba2d1be4e16d321e3f15b7%2FFront_CF10_Spike_Conical_Fermenter.jpg 857c41bc36ba2d1be4e16d321e3f15b7%2FCF10_Spike_Conical_Fermenter.jpg

    CF10 Spike Conical Unitank

    1 in stock

    CF10 SPIKE CONICAL UNITANK Spike Brewing has completely re-designed their stainless conical line from the ground up. It took a year in the making and are confident that these are the best conical fermenters on the market! Along with the new TC100 Temp Control System, you'll have everything you need to Elevate Your Brew Day! CF10 Features: 304 stainless steel; 1.2mm (18ga) All sanitary welded ports (no-weldless fittings) All hardware shown here is included! Designed for 5 to 10 gallon batches 14 gallon total capacity 15 psi working pressure (always use a 15 psi pressure relief valve) Use for pressure transfers Use as a brite tank Etched volume markings 17" wide by 35¨ tall Fully polished finish Lid Features: 4" TC modular top port Allows for hop additions, temp control coil, top sight glass, etc Three 1.5" TC ports which allow for:  Blow Off Port – Dedicated port for an airlock or blow off tube Hop Port – Dedicated port for adding hops PRV Port – Dedicated port for your pressure relief valve (PRV) Stainless band clamp for attaching the lid Completely removable lid for easy cleaning Body Features: Huge 2" TC bottom dump with butterfly valves (no more stuck yeast dumps) 1.5" TC racking port with butterfly valve 1.5" TC sample valve (for taking gravity readings) 1.5" TC thermowell with 3" dial thermometer  Limited availability in store.  Drop ships from vendor.

    1 in stock

    $775.00

  • 857c41bc36ba2d1be4e16d321e3f15b7%2F3_Port_CF5-Conical.jpg 857c41bc36ba2d1be4e16d321e3f15b7%2FFRONT_3_port_CF5-Conical.jpg

    CF5 Spike Conical Unitank

    Out of stock

    CF5 SPIKE CONICAL UNITANK Spike Brewing has completely re-designed their stainless conical line from the ground up. It took a year in the making and are confident that these are the best conical fermenters on the market! Along with the new TC100 Temp Control System, you'll have everything you need to Elevate Your Brew Day! CF5 Features: 304 stainless steel; 1.2mm (18ga) All sanitary welded ports (no-weldless fittings) All hardware shown here is included! Designed for 2.5 to 6 gallon batches 7 gallon total capacity 15 psi working pressure (always use a 15 psi pressure relief valve) Use for pressure transfers Use as a brite tank Etched volume markings 14" wide by 29¨ tall Fully polished finish Lid Features: 4" TC modular top port Allows for hop additions, temp control coil, top sight glass, etc Three 1.5" TC ports which allow for:  Blow Off Port – Dedicated port for an airlock or blow off tubeHop Port – Dedicated port for adding hopsPRV Port – Dedicated port for your pressure relief valve (PRV) Stainless band clamp for attaching the lid Completely removable lid for easy cleaning Body Features: Huge 2" TC bottom dump with butterfly valves (no more stuck yeast dumps) 1.5" TC racking port with butterfly valve 1.5" TC sample valve (for taking gravity readings) 1.5" TC thermowell with 3" dial thermometer  Limited availability in store.  Drop ships from vendor.

    Out of stock

    $660.00

  • 857c41bc36ba2d1be4e16d321e3f15b7%2FFRONT_CF15_Spike_Conical_Fermenter.jpg 857c41bc36ba2d1be4e16d321e3f15b7%2FCF15_Spike_Conical_Fermenter.jpg

    CF15 Spike Conical Unitank

    Out of stock

    CF15 SPIKE CONICAL UNITANK Spike Brewing has completely re-designed their stainless conical line from the ground up. It took a year in the making and are confident that these are the best conical fermenters on the market! Along with the new TC100 Temp Control System, you'll have everything you need to Elevate Your Brew Day! CF15 Features: 304 stainless steel; 1.2mm (18ga) All sanitary welded ports (no-weldless fittings) All hardware shown here is included! Designed for 5 gallon to 1/2 bbl batches 18 gallon total capacity 15 psi working pressure (always use a 15 psi pressure relief valve) Use for pressure transfers Use as a brite tank Etched volume markings 17" wide by 39¨ tall Fully polished finish Lid Features: 4" TC modular top port Allows for hop additions, temp control coil, top sight glass, etc Three 1.5" TC ports which allow for:  Blow Off Port – Dedicated port for an airlock or blow off tube Hop Port – Dedicated port for adding hops PRV Port – Dedicated port for your pressure relief valve (PRV) Stainless band clamp for attaching the lid Completely removable lid for easy cleaning Body Features: Huge 2" TC bottom dump with butterfly valves (no more stuck yeast dumps) 1.5" TC racking port with butterfly valve 1.5" TC sample valve (for taking gravity readings) 1.5" TC thermowell with 3" dial thermometer  Limited availability in store.  Drop ships from vendor.

    Out of stock

    $925.00

  • Conical Unitank Bracing Shelf

    Conical Unitank Bracing Shelf

    Out of stock

    Spike Brewing's custom bracing shelf is made in the USA and is a recommended addition when casters or leg extensions are installed for additional stability. Their bracing shelf will also come in handy as a storage shelf for blowoff buckets, tools and more. Specifications: 304SS Super thick 14ga material Made in the USA Bracing shelf install and instructions:Install + instructions

    Out of stock

    $45.00 - $50.00

  • Grainfather GF30 Conical Fermenter Grainfather GF30 Conical Fermenter

    Grainfather GF30 Conical Fermenter

    Out of stock

    Limited availability in store, drop ships from vendor.   The Grainfather Conical Fermenter Pro gives brewers more flexibility and freedom during fermentation than ever before!   Product Description The Grainfather Conical Fermenter Pro has built-in wireless control, so you can control and monitor fermentation from anywhere!  The Conical Fermenter Pro gives brewers more flexibility and freedom during fermentation than ever before! Connect the built-in wireless controller to the internet and the Grainfather App, add fermentation tracking devices and control/monitor fermentation from anywhere!   The Conical Fermenter Pro allows you to dump yeast, take samples and transfer your wort via our innovative, dual function, valve design. Partner it with the Glycol Chiller*** and get full control over the heating and cooling of your unit. FEATURES: Double Walled: A stainless steel double walled skin is filled with a thick layer of polyurethane foam for insulation. This is what keeps the wort at a constant stable temperature with minimal influence from any external environmental temperature changes, providing insulation for your fermentation that a standard jacket cannot achieve.  Integrated Gentle Heating: In the cavity of the fermenter between the outer body and cone sits a 30 Watt, 12V heating element. Unlike standard heating elements/sources that directly heat the liquid, this heat source is designed to heat the environment in between the walls of the fermenter, which in turn heats the liquid. It is similar to controlling the temperature in a temperature-controlled room. The fermenter acts as an artificial environment that can be heated, meaning the temperature is raised in an even and controlled manner which is much better for the yeast. Integrated Cooling Sleeve: In between the two stainless steel walls sits a cooling sleeve (also made of stainless steel). This cooling sleeve is welded onto the inner wall of the fermenter and can be hooked up to the additionally purchased Glycol Chiller. Temperature is dialed into the Temperature Controller and as the cooling liquid travels through this sleeve, it cools the stainless steel which in turn evenly cools the beer in the fermenter. The cooling sleeve never comes into contact with the beer, it is completely concealed, built into the fermenter, and never needs cleaning or sanitizing - a true innovation for a fermenter of this scale.Easy Access to the Interior for Hassle-Free Cleaning: The Grainfather Conical Fermenter has a smooth interior with no additions such as cooling coils or additional sampling valves meaning it is easy to clean and minimizes the risk of infection. Golden Angle Conical: The conical shape of the fermenter is typical for professional breweries. Our conical has been designed with the 'Golden Angle' of 60º. This is the optimum angle for yeast and sediment to drop down to the bottom of the cone without getting stuck to the sides, allowing you to transfer from above the sediment line, resulting in clearer beer. The conical shape also allows for better mixing during fermentation due to the path of convention currents that it enables to occur. Dual Valve Tap: Make the yeast dumping, transferring and sampling process more professional with this innovative all in one valve. Sampling and transferring is done through an inlet above the sediment line, allowing for clear, sediment-free beer. Easily collect your yeast from below the sediment line with the same unique valve for recultivating and pitching. The innovative design of the valve allows for this dual functionality and less cleaning for you.  Support: The Grainfather Conical Fermenter is fully supported around the world by a fantastic support team who love brewing just as much as you do. Our support team is here for any technical inquiries on brewing or how the Conical Fermenter works, as well as general customer service inquiries. All Grainfather Conical Fermenters come with a 24-month warranty. Includes: Conical Fermenter  Fermenter Lid Rubber Bung Bubbler Airlock Cone Plug Cone Plug Seal 5 cm (2") Tri-Clamp Digital Temperature Display Power Adapter and Wall Plug 2 m (6.5 ft) M12 3-Pin Power Cord Dual Valve Tap Wi-Fi Capable Wireless Temperature Controller Specifications: 304 Stainless Steel Body (polished inner and brushed outer) 30 L (8 US Gal) capacity (volume markings on inner body up to 25 L (7 US Gal) 30 W, 12 V heating power 3.8 cm (1.5") ferrule on lid (for pressure transfer attachments) 5 cm (2") ferrule on bottom of cone Dual Valve Tap with 110 mm (4.3”) inlet Dimensions of Conical Fermenter:  Diameter with handles: 360 mm (14.2") Height (without airlock): 910 mm (35.83") Height with bubbler airlock: 1090 mm (42.92") Dimensions of Carton: 368 mm W x 325 mm L x 905 mm H Limited availability in store, drop ships from vendor.

    Out of stock

    $694.98

  • Replacement Pump for Marchisio Variable Volume Tanks Replacement Pump for Marchisio Variable Volume Tanks

    Replacement Pump for Marchisio Variable Volume Tanks

    2 in stock

    Pneumatic air pump for variable capacity (VC) tanks. Features a 3/8 in barbed nipple to attach a length of tubing. Can be used with VC tanks from most manufacturers.

    2 in stock

    $69.99

  • 200L (53G) Variable Capacity Tank - Flat Bottom 200L (53G) Variable Capacity Tank - Flat Bottom

    200L (53G) Variable Capacity Tank - Flat Bottom

    Out of stock

    Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha.  Includes: 304 Stainless Tank 304 Stainless Floating Lid Food-Grade Floating Gasket Air Pump with pressure gauge Connection kit for connecting gasket to pump Dry Airlock for tank Chrome Plated Spigot 200L Specifications: Nominal volume: 200 Liters (52.8 gallons) Effective volume: 200 Liters (52.8 gallons) Diameter: 50 cm (20 inches) Height: 120 cm (47 inches) Valve size: 1/2" BSP Thickness (Bottom X side, in mm): 1.0 X 0.7 *Please Note: Tank may differ slightly from image shown. Stands are sold separately. Due to size of this item, it is available for pick-up only.

    Out of stock

    $599.99

  • Bucket Buddy Stainless Fermenter with Heating - 65L/17.1G (110V) Bucket Buddy Stainless Fermenter with Heating - 65L/17.1G (110V)

    Bucket Buddy Stainless Fermenter with Heating - 65L/17.1G (110V)

    1 in stock

    This top value fermenter is made from 304 grade stainless steel and has an integrated (concealed) 60-watt heating element. No need to worry about accessories such as heating belts and external temperature controllers. This stainless steel fermenter will keep your yeast at optimal temperature making it the ideal option for cold climates. The welding is smooth and the outer body has a sleek brushed stainless finish making it easy to clean and maintain. The base inside this unit is a dome so it's really easy to clean while the rotating rack arm enables you to drain out every last drop. This unit comes standard with silicone tubing to transfer from the ball valve to your bottles or cans. Specifications: 110V / 60W power Capacity: 65L Brimful Body Material: 304 Stainless steel Outlet Valve Type: Stainless steel, nylon bushings, silicone seal and stainless rotating rack arm. Thread on tap is 1/2" Lid: 304 Stainless steel Display: Digital temperature display Heating: 60 Watt Concealed Element Stopper & airlock included Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C Please note: Heating capacity is highly dependent on ambient temperature and use of insulation. The 65L Bucket Buddy is appropriate for warm fermentations such as kveik. Adding insulation may increase heating capacity while colder ambient environments may lower heating capacity. KegLand Part Number: KL23061

    1 in stock

    $249.99

  • 100 L (26G) Variable Capacity Tank - Flat Bottom 100 L (26G) Variable Capacity Tank - Flat Bottom

    100 L (26G) Variable Capacity Tank - Flat Bottom

    1 in stock

    Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha.  Includes: 304 Stainless Tank 304 Stainless Floating Lid Food-Grade Floating Gasket Air Pump with pressure gauge Connection kit for connecting gasket to pump Dry Airlock for tank Chrome Plated Spigot 100L Specifications: Nominal volume: 100 Liters (26.4 gallons) Effective volume: 93 Liters (24.6 gallons) Diameter: 50 cm (20 inches) Height: 60 cm (24 inches) Valve size: 1/2" BSP Thickness (Bottom X side, in mm): 1.0 X 0.7 *Please Note: Tank may differ slightly from image shown. Stands are sold separately. Due to size of this item, it is available for pick-up only.

    1 in stock

    $499.99

  • Sale -50% Lid Gasket, 7 Gallon Brew Bucket and Chronical

    Lid Gasket, 7 Gallon Brew Bucket and Chronical

    2 in stock

    Replacement lid gasket for SS Brewtech's 7 gallon Chronical and Brew Buckets.

    2 in stock

    $13.95 $6.99

  • Leveling Feet

    Leveling Feet

    3 in stock

    Want some additional leveling adjustment for your FLEX? Well the Spike Brewing non-marking leveling feet will do the trick! They also use a 304SS stud because nobody likes rust! Specifications: Non marking plastic bottom 304SS stud 3 pack

    3 in stock

    $16.00

  • FLEX Replacement Lid Gasket

    FLEX Replacement Lid Gasket

    Out of stock

    The Spike Brewing conical lid gasket is a one piece design made from FDA approved Silicone. This design allows for an easy install and easy clean up. Simply push the gasket into the gasket groove on the lid. Specifications: Black in color FDA approved Silicone Works with the FLEX and FLEX+

    Out of stock

    $12.00

  • FLEX Extended Bracing Shelf

    FLEX Extended Bracing Shelf

    1 in stock

    The Spike Brewing custom Spike extended bracing shelf is a recommended addition when casters or leg extensions are installed. The extended bracing shelf widens the stance of the FLEX making it more stable. This helps when going vertical with the leg extensions or mobile with casters.  Specifications: 304SS Super thick 14ga material Made in the USA Bracing shelf install and instructions:Install + instructions

    1 in stock

    $55.00

  • Grainfather Conical Fermenter Dual Valve Grainfather Conical Fermenter Dual Valve

    Grainfather Conical Fermenter Dual Valve

    Out of stock

    Make the yeast dumping, transferring and sampling process more professional with this innovative all in one valve. Sampling and transferring is done through a valve above the sediment line, allowing for clear, sediment free beer. Collect your yeast from below the sediment line for recultivating and pitching.  Dual Valve Tap with 4.3” (110 mm) liquid inlet for the Grainfather Conical Fermenter Special Order.  Please contact us for availability.

    Out of stock

    $99.99

  • Chronical Replacement O-rings

    Chronical Replacement O-rings

    3 in stock

    Four replacement o-rings for Ss Brewing Technologies Chronical racking arm bought after September 2014.

    3 in stock

    $2.99

  • Blow Off Cane, 3'' TC for 14 gallon Chronical Blow Off Cane, 3'' TC for 14 gallon Chronical

    Blow Off Cane, 3'' TC for 14 gallon Chronical

    1 in stock

    Blow off cane for 14 gallon Chronical. Made from 304 stainless steel this blow off cane is for 3" tri-clamp lids and includes a pressure relief valve. A 3" tri-clamp gasket is NOT included.

    1 in stock

    $56.95

  • Sale -25% 3/8'' Stainless Steel Tap

    3/8'' Stainless Steel Tap

    1 in stock

    3/8" mpt stainless steel spigot with black handle.  

    1 in stock

    $19.99 $14.99

  • Sale -24% 3/8'' All Stainless Steel Tap for Oil Drums

    3/8'' All Stainless Steel Tap for Oil Drums

    2 in stock

    3/8" mpt stainless steel spigot for olive oil drum.  

    2 in stock

    $24.99 $18.99

  • FLEX Leg Extension Set

    FLEX Leg Extension Set

    3 in stock

    Leg extensions are a great option to get th FLEX off the ground. This reduces bending over to take gravity readings, add hops, transfer, etc. The shorty leg extensions are 9” long and the long leg extensions are 18". Both screw directly into the bottom of the FLEX legs. Both sets of leg extensions can be used with the stock leg caps, leveling feet and casters.  *It is recommend to use the extended bracing shelf when using the leg extensions for added stability* Shortly leg extension specifications:  304SS 9" long Top threads for attaching to conical legs Bottom threads for attaching leveling feet and casters Long leg extension specifications:  304SS 18" long Top threads for attaching to conical legs Bottom threads for attaching leveling feet and casters

    3 in stock

    $42.00 - $55.00

  • Conical Replacement Lid Gasket

    Conical Replacement Lid Gasket

    Out of stock

    The Spike Brewing conical lid gasket is a one piece design made from FDA approved Silicone. This design allows for an easy install and easy clean up. Simply push the gasket into the gasket groove on the lid. Specifications: Black in color FDA approved Silicone

    Out of stock

    $13.00 - $40.00

  • 857c41bc36ba2d1be4e16d321e3f15b7%2FFRONT_CF30_Spike_Conical_Fermenter.jpg 857c41bc36ba2d1be4e16d321e3f15b7%2FCF30_Spike_Conical_Fermenter.jpg

    CF30 Spike Conical Unitank

    Out of stock

    CF30 SPIKE CONICAL UNITANK Spike Brewing has completely re-designed their stainless conical line from the ground up. It took a year in the making and are confident that these are the best conical fermenters on the market! Along with the new TC100 Temp Control System, you'll have everything you need to Elevate Your Brew Day! CF30 Features: 304 stainless steel; 1.5mm (16ga) All sanitary welded ports (no-weldless fittings) All hardware shown here is included! Designed for 1/2 bbl to 1 bbl batches 40 gallon total capacity 15 psi working pressure (always use a 15 psi pressure relief valve) Use for pressure transfers Use as a brite tank Etched volume markings 24" wide by 46¨ tall Fully polished finish Lid Features: 4" TC modular top port Allows for hop additions, temp control coil, top sight glass, etc Three 1.5" TC ports which allow for:  Blow Off Port – Dedicated port for an airlock or blow off tube Hop Port – Dedicated port for adding hops PRV Port – Dedicated port for your pressure relief valve (PRV) Stainless band clamp for attaching the lid Completely removable lid for easy cleaning Body Features: Huge 2" TC bottom dump with butterfly valves (no more stuck yeast dumps) 1.5" TC racking port with butterfly valve 1.5" TC sample valve (for taking gravity readings) 1.5" TC thermowell with 3" dial thermometer Bracing shelf is included with the CF30  Limited availability in store.  Drop ships from vendor.

    Out of stock

    $1,725.00

Stainless Steel Fermenters

Login

Forgot your password?

Don't have an account yet?
Create account