Spike Brewing Conical Accessories
Conical Extended Bracing Shelf
Spike Brewing's new custom Spike extended bracing shelf was a solution created based on customer feedback on their normal bracing shelf. The extended bracing shelf now widens the footprint of the conical making it more stable. It is a recommended addition when going vertical with the leg extensions or mobile with casters. Features: 304SS Super thick 14ga material Made in the USA Welded support bars Includes 3 bolts to affix the conical to the bracing shelf Bracing shelf install and instructions:Install + instructions Additional accessories to add on: -Caster Wheels -Standard or Shorty Leg Extensions
$70.00 - $90.00
CIP Ball
Another cool innovation from the Spike Brewing engineers; their low pressure CIP ball! They wanted to design a CIP ball that didn’t require home brewers to purchase another pump if they already owned one. Small brewery pumps, like Chugger and March pumps used on our Spike System, are very common for most home brewers. However, most CIP balls require a much larger pump to work properly. This CIP ball was specifically designed to work with the more common 7GPM pumps. It has also been tested with larger sump pumps which are also commonly used for CIP applications. Spike Brewing also designed the CIP ball to fit through a 1.5" TC port. This allows for quick install of the CIP ball after fermentation. This works especially well with cleaning the temp control coil. They recommend a 5-10min CIP with 160F brewery wash to give a nice and shiny FLEX or conical fermenter. Pro Tip:If you do not have a FLEX+ lid with 1.5" TC port you can attach the CIP ball to the secondary port of your FLEX after an initial dump and rinse. Then simply CIP as described above! Specifications: 1.5" TC x 1.5" TC 304SS Low flow design
$70.00
ForgeFit® Stainless Tri-Clamp End Cap - 3 in.
End cap for 3" tri-clamp fittings. Made from 304 stainless steel.
$6.99
3" Tri-Clamp, Stainless Steel
The most popular choice for sanitary connections, tri-clamp fittings are widely used in the food & beverage industry due to their ability to be cleaned in place. Tri-clamps join two fittings together without any nooks or crannies for contaminants to hide. Use anywhere you want to ensure a sanitary connection. 3" tri-clamp Made from 304 stainless steel
$10.99
4" TC Cap
Cap any 4” port with this stainless steel cap. Specifications: 4" TC 304SS
$16.00
TC Sample Valve
Spike Brewing conicals come equipped with this 100% sanitary sample valve. Taking samples has never been so easy; simply twist the valve handle to slowly draw out a sample from your fermenter for a gravity reading. The one downside is you might end up with lower final volumes due to how easy it is to take taste tests ;)Specifications: 1.5" TC 304SS FDA Silicone seals 3/8” barb
$35.00
TC-100 Bundle
Spike Brewing's TC100 temp control system will manage both cooling and heating of your Spike Conical. The digital controller's temp probe will feed into the included thermowell on our CF Series Conical. Also included is a specially fitted neoprene jacket which features reinforced port holes to reduce the chance of ripping during install. Last (and maybe the coolest item) is Spike Brewing's special insulated tubing. This almost eliminates tube cooling losses and will prevent your cooling lines from sweating all over your floor! Cooling:When the temp in the conical rises above the set point it will turn on the pump submerged in your cold water reservoir (bucket of ice water, dorm fridge, aquarium or glycol chiller, DIY AC chiller, etc). This will pump cold water/glycol through the temp control coil, which mounts to the lid, cooling your beer until it reaches the controller set point. Heating:When the temp in the conical falls below the controller set point the optional heater will kick on warming the unit up. Detailed product guide:Product Guide.pdf TC100 Package:-Digital closed loop controller (heating and cooling)-Insulated tubing (more efficient and no more sweaty tubes!-Temp control coil-Neoprene insulated jacket-Submersible pump (pumping cold water through the temp coil)-Temp Coil Quick Connect Fittings TC100 + Heat Package:-TC100 Package (above)-Optional heater (for us northern brewers) Limited availability in store. Drop ships from vendor.
$325.00 - $550.00
ForgeFit - 1.5" EPDM TC Gasket - Blue
EPDM gasket for 1.5" tri-clamp connection with a temperature range of -30°F to 300°F. Use color-coded gaskets for different applications to avoid cross contamination.
$2.00
Spike Tank Racking Arm
Specifically designed for our Tank Bottom Drain Boil and Solo kettles, this racking arm is the key component to make sure you take only the highest quality wort to your fermenter and leave hops and trub behind in your kettle. The dual 1.5" TC flange allows the pickup tube to attach to the kettle and allows for a 1.5" TC accessory to attach to the arm as well. We use 5/8" tubing which flows up to four times better than our competitors 1/2" size. Tank Racking Arm fits all 5 sizes of the Tank Bottom Drain Kettles Oversized 5/8" diameter 304 stainless tube Indicator pin lets the brewer see which way the tube is pointing when installed and covered in wort Rotatable when installed from the outside Made in the USA **A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares**
$45.00
Glycol Line Coupler
The straight quick connect fittings allow you to increase the length of the Spike Brewing insulated tubing. This insulated glycol tubing is sold in increments of 6ft. If you need to increase the length of tubing, this is your solution. Specifications: 1/2" to 1/2" connections 2 fittings included per purchase (enough to connect 2 lengths of the Spike Brewing insulated tubing)
$11.00
15 psi Pressure Relief Valve
When pressurizing your Spike Conical you'll always want to use a pressure relief valve (PRV). This will prevent the tank from being over pressurized and causing a potential failure to occur. This Spike Brewing PRV was developed with their OEM specifically to work with their CF series Conical. It will keep your tank below the 15psi max working pressure rating. The PRV also has a handy bleeder pull ring to release built up pressure. Specifications: 15 psi release 1/4" npt threads Spike Brewing's specially designed gas manifold is also now available.
$25.00
ForgeFit® Stainless Tri-Clamp End Cap Reducer - 4 in. x 1.5 in.
Connect a 4" TC fitting to a 1.5" TC fitting with this reducer. Made from 304 stainless steel.
$37.99
2" TC Butterfly Valve
Spike Brewing conicals come equipped with this 100% sanitary 2” TC butterfly valve. This valve has a squeeze locking/trigger handle that allows for 180 degrees of motion and 13 locking positions.The butterfly valve is the preferred valve for the cold side of brewing instead of ball valves. These butterfly valves have no pockets or crevices for bacteria to hide in. Ball valves can trap liquid between the seals in the internal ball when opening and closing the valve.The handle is a special 'shorty' style which keeps a compact design. This handle is made from extremely durable glass reinforced Nylon which is much lighter than metal handles. Specifications: 2" TC 304SS metal components FDA silicone seals Light and very durable Nylon handle Squeeze trigger with 13 locking positions
$75.00
Carb Stone
If you didn't already know the Spike Conical is a unitank! This means it is designed to handle pressures up to 15psi. This capability allows you to add 15psi of pressure needed to carbonate your beer before transferring to your keg. This will reduce carbonation times from upwards of a week down to less than 24hrs. Spike Brewing's carb stone is designed to attach to the outside of the racking port butterfly valve. This means the carb stone can be installed when you need it and won't be sitting inside the tank during the entire fermentation process. This eliminates the chance for the stone to become clogged. It also has a protective stainless housing which prevents damaging the very brittle 'stone'. Detailed product guide:Product Guide.pdf Forced carbonation pressure chart:Carbonation Chart Carb Stone Only Carb Stone 1.5" TC Clamp 1.5" TC Gasket Gas Post Carb Stone Bundle Carb Stone Package (see above) Pressure Gauge (Link) PRV (Link) 2nd Gas Post (Link) Gas Manifold (Link) **Always use a 15psi pressure relief valve when pressurizing a tank**
$85.00 - $160.00
TC Sample Valve Gasket Set
FDA approved EPDM gaskets for all your sample needs. Go get yourself a new gasket and seal that baby right up!
$2.50
Oxygenation Kit
An oxygenation kit specifically designed for homebrewing. Oxygenate your wort easily and conveniently with a precise amount of oxygen rather than leaving it to chance. The Spike Oxygenation (O2) Kit was designed to provide homebrewers with a simple solution for oxygenating their wort prior to fermentation; Happy yeast = happy beer! The days of slow or failed fermentations are over, and a giant 10lb oxygen tank is no longer the only solution! The O2 kit is designed to attach to a standard hardware store oxygen tank and will precisely oxygenate your wort to make sure fermentation goes smoothly! With that precise flow control, eacg oxygen bottle will oxygenate up to 200 gallons of wort; saving you time and money!
$85.00
Pickup Tube Replacement O-Rings
Set of 3 replacement o-rings for the Spike Brewing 5/8" quick connect pickup tube fittings. Specifications: FDA approved Buna-N Sold in set of 3
$2.50
HERMs Coil Replacement O-Rings
Set of 3 replacement o-rings for the Spike Brewing 1/2" quick connect HERMs coil fittings. Specifications: FDA approved Buna-N Sold in set of 3
$3.00