Spike Brewing
FLEX Replacement Lid Gasket
The Spike Brewing conical lid gasket is a one piece design made from FDA approved Silicone. This design allows for an easy install and easy clean up. Simply push the gasket into the gasket groove on the lid. Specifications: Black in color FDA approved Silicone Works with the FLEX and FLEX+
$12.00
Adjustable Thermometer
This Spike Brewing adjustable face dial thermometer can be orientated 360 degrees so reading the thermometer is easier. This 1/2” NPT Brew Thermometer is ready to screw directly into the kettle. This 2.5” stemmed thermometer can cover 40-220 degree ranges. The 3” glass dial will display all the information you need at a glance and while withstanding the high heat from the burner below. The thermometer also has calibration screw for added accuracy.
$40.00
50 Gallon Spike Brewing Kettle - V4, Vertical Couplers
50 GALLON STAINLESS BREW KETTLE - V4 Spike Brewing has once again re-designed their brew kettle. They make one of the best brewing kettles available on the market. It is the thickest kettle on the market, with US welded fittings (no more weldless fittings) at a factory direct price. Kettle Features: 15 - 32 gallon batch size 304 (18/8) stainless steel Sanitary welded coupler design (done at our facility in Milwaukee, WI) 1.5mm thick walls (50% thicker than competition) 6mm tri-clad bottom (induction capable) Internal volume markings Polished finish 23.6¨ wide by 27.1¨ tall Domed bottom design Bottom coupler 1.5" off the bottom (3 gallon mark) Top coupler 6" off the bottom (12 gallon mark) Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store. Drop ships from vendor.
$660.00
30 Gallon Spike+ Kettle
30 GALLON SPIKE+ BREW KETTLE Introducing Spike Brewing's new Spike+ line of kettles! Spike+ is just that, an improvement on an already great platform. The Spike+ line draws from the pro side of brewing with the standard use of tri-clamp (TC) fittings. TC fittings do not have any threads and use a gasket and clamp which allows for quick attaching/detaching of fittings. The Spike+ line is for the most serious homebrewers! While designing the setup of the kettle, Spike Brewing offset the ports on these kettles, so you have ample room to use our butterfly valves, or other accessories, with ease. Kettle Features: 10 – 20 gallon batch 304 (18/8) stainless steel Sanitary welded coupler design (done at Spike Brewing's facility in Milwaukee, WI) 1.5mm thick walls (thickest on the market) 6mm tri-clad bottom (induction capable) Internal volume markings Polished finish 19.7¨ wide by 24.1¨ tall Domed bottom design Bottom coupler 2" off the bottom (3 gallon mark) Top coupler 4" off the bottom (5 gallon mark) Staggered design keeps the top port submerged with half batches Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store. Drop ships from vendor.
$515.00
20 Gallon Spike Brewing Kettle - V4, Vertical Couplers
20 GALLON STAINLESS BREW KETTLE - V4 Spike Brewing has once again re-designed their brew kettle. They make one of the best brewing kettles available on the market. It is the thickest kettle on the market, with US welded fittings (no more weldless fittings) at a factory direct price. Kettle Features: 6 - 15 gallon batch size 304 (18/8) stainless steel Sanitary welded coupler design (done at our facility in Milwaukee, WI) 1.2mm thick walls (thickest on the market) 5mm tri-clad bottom (induction capable) Internal volume markings Polished finish 17.7¨ wide by 21.4¨ tall Domed bottom design Bottom coupler 1.5" off the bottom (2 gallon mark) Top coupler 6" off the bottom (6.5 gallon mark) Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store. Drop ships from vendor.
$395.00
15 Gallon Spike+ Kettle
15 GALLON SPIKE+ BREW KETTLE Introducing Spike Brewing's new Spike+ line of kettles! Spike+ is just that, an improvement on an already great platform. The Spike+ line draws from the pro side of brewing with the standard use of tri-clamp (TC) fittings. TC fittings do not have any threads and use a gasket and clamp which allows for quick attaching/detaching of fittings. The Spike+ line is for the most serious homebrewers! While designing the setup of the kettle, Spike Brewing offset the ports on these kettles, so you have ample room to use our butterfly valves, or other accessories, with ease. Kettle Features: 5 – 11 gallon batch 304 (18/8) stainless steel Sanitary welded coupler design (done at Spike Brewing's facility in Milwaukee, WI) 1.2mm thick walls (thickest on the market) 5mm tri-clad bottom (induction capable) Internal volume markings Polished finish 15.8¨ wide by 19.4¨ tall Domed bottom design Bottom coupler 2" off the bottom (2 gallon mark) Top coupler 4" off the bottom (3 gallon mark) Staggered design keeps the top port submerged with half batches Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store. Drop ships from vendor.
$350.00
15 Gallon Spike Brewing Kettle - V4, Vertical Couplers
15 GALLON STAINLESS BREW KETTLE - V4 Spike Brewing has once again re-designed their brew kettle. They make one of the best brewing kettles available on the market. It is the thickest kettle on the market, with US welded fittings (no more weldless fittings) at a factory direct price. Kettle Features: 5 - 11 gallon batch size 304 (18/8) stainless steel Sanitary welded coupler design (done at our facility in Milwaukee, WI) 1.2mm thick walls (thickest on the market) 5mm tri-clad bottom (induction capable) Internal volume markings Polished finish 15.8¨ wide by 19.4¨ tall Domed bottom design Bottom coupler 1.5" off the bottom (1.5 gallon mark) Top coupler 6" off the bottom (5 gallon mark) Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store. Drop ships from vendor.
$305.00
Pressure Gauge
This pressure gauge can be used while pressure fermenting, briting or pressure transferring. Specifications: 0-30psi 2" Dial 1/4"npt **This accessory is to only be used with the FLEX+ or the upgraded high pressure lid**
$15.00
FLEX Leg Extension Set
Leg extensions are a great option to get th FLEX off the ground. This reduces bending over to take gravity readings, add hops, transfer, etc. The shorty leg extensions are 9” long and the long leg extensions are 18". Both screw directly into the bottom of the FLEX legs. Both sets of leg extensions can be used with the stock leg caps, leveling feet and casters. *It is recommend to use the extended bracing shelf when using the leg extensions for added stability* Shortly leg extension specifications: 304SS 9" long Top threads for attaching to conical legs Bottom threads for attaching leveling feet and casters Long leg extension specifications: 304SS 18" long Top threads for attaching to conical legs Bottom threads for attaching leveling feet and casters
$42.00 - $55.00
Pickup Tube - Center
Spike Brewing's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with their full port valves which have a 5/8" flow diameter; no flow restriction. Spike Brewing's proprietary fittings uses quick connect technology. The quick connect fitting simply hand screws into the kettle and the pickup tube easily pushes in/pulls out; no tools needed. Features: One size fits all kettles Large 5/8" diameter 304 stainless tube Simply push in for seal; no tools required Proprietary stainless push to connect fitting included Sized to pick up from the bottom edge of the kettle Made in the USA
$33.00 - $45.00
CF30 Spike Conical Unitank
CF30 SPIKE CONICAL UNITANK Spike Brewing has completely re-designed their stainless conical line from the ground up. It took a year in the making and are confident that these are the best conical fermenters on the market! Along with the new TC100 Temp Control System, you'll have everything you need to Elevate Your Brew Day! CF30 Features: 304 stainless steel; 1.5mm (16ga) All sanitary welded ports (no-weldless fittings) All hardware shown here is included! Designed for 1/2 bbl to 1 bbl batches 40 gallon total capacity 15 psi working pressure (always use a 15 psi pressure relief valve) Use for pressure transfers Use as a brite tank Etched volume markings 24" wide by 46¨ tall Fully polished finish Lid Features: 4" TC modular top port Allows for hop additions, temp control coil, top sight glass, etc Three 1.5" TC ports which allow for: Blow Off Port – Dedicated port for an airlock or blow off tube Hop Port – Dedicated port for adding hops PRV Port – Dedicated port for your pressure relief valve (PRV) Stainless band clamp for attaching the lid Completely removable lid for easy cleaning Body Features: Huge 2" TC bottom dump with butterfly valves (no more stuck yeast dumps) 1.5" TC racking port with butterfly valve 1.5" TC sample valve (for taking gravity readings) 1.5" TC thermowell with 3" dial thermometer Bracing shelf is included with the CF30 Limited availability in store. Drop ships from vendor.
$1,725.00
Conical Replacement Lid Gasket
The Spike Brewing conical lid gasket is a one piece design made from FDA approved Silicone. This design allows for an easy install and easy clean up. Simply push the gasket into the gasket groove on the lid. Specifications: Black in color FDA approved Silicone
$13.00 - $40.00
Spike+ Pickup Tube - Center
The Spike+ center pickup is specially designed to work with the Spike+ line of kettles. The dual 1.5" TC flange allows the pickup tube to attach to the kettle and have a valve or other 1.5" TC accessory attached to the outside. Spike Brewing uses 5/8" tubing which flows up to 4x better than their competitors 1/2" size. Features: Oversized 5/8" diameter 304 stainless tube Sized to pick up from the center of the kettle Made in the USA **A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares**
$40.00 - $45.00