Straining & Funnels

2" x 24" nylon bag for dry hopping in a keg.

Read more less

Keep your hops in the kettle and out of the fermenter with this hop filter basket. Conveniently hangs inside the boil kettle and can be removed at any time if needed. The double handle design helps to keep the basket steady. Also works great as a secondary filter when transferring wort from a mash tun to the kettle. Specifications: Made from 304 stainless steel Double handle design 10" H x 4" Ø

Read more less

Helps filter debris when transferring wort from your kettle to your fermenter.

Read more less

Hot side hop additions should stay in the kettle and out of the fermenter. Keep all that hop matter from transferring out with your wort using this Double Handle Hop Filter. At 6" diameter and 14" tall, this unit will do well with even the hoppiest beers you brew. Conveniently hangs on the inside of your kettle so you can remove it at any point if needed. The double handle design will keep the basket nice and steady compared to single handle units. This is a great alternative to hop bags which have the potential to decrease hop utilization compared. While using this filter basket you can add hops directly to your kettle for maximum wort exposure. Specifications: Made from 304 stainless steel Double handle design 14" H x 6" Ø

Read more less

The Super Hop Filter is designed to rest inside your kettle and keep hops and other vegetal matter from transferring out with your wort. This is a great alternative to hop bags which have the potential to decrease hop utilization in comparison. While using this filter basket you can add hops directly to your kettle for maximum wort exposure. The 13.75" diameter will fit most larger sized kettles. It's also wide enough that most immersion chillers can rest inside the basket during chilling. Specifications: Made from 304 stainless steel 300 micron mesh Lifting handle Hooked feet to keep it off the kettle floor 13.75" H x 13.75" Ø

Read more less

This stainless steel perforated tube will hold 2 oz. of oak chips or cubes and can be lowered into your carboy with a small length of plastic line.

Read more less

A nylon bag with fine mesh sides and a coarse mesh bottom, sized to fit 7.8 gallon buckets 16" x 22" diameter.

Read more less

This stainless steel bucket strainer is an excellent accessory to make cleaning and sanitizing your brew hardware quick and easy. Place the strainer inside a bucket of cleaning solution or sanitizer and then toss in your tri-clamp fittings or other parts. When you're done, simply pull the basket out of your bucket using the handle and all of your hardware will be conveniently contained in the basket. No need to submerge your whole arm into chemical solutions to fish out parts! Made by ForgeFit® so you know it is heavy duty.  9.875" H x 8.25 Ø

Read more less

The Hop Spider keeps hops together during the boil, and can be used on all appropriate sized boil pots, including the Grainfather.Made with a coarser, 800 micron mesh, for maximum wort flow and increased hop utilization.Designed with a specifically fitted hook design which can be hooked onto the side of any brew pot or the Grainfather system support ring. Perfect for those of you who would like the reassurance of a hop spider when brewing.This spider can be used for any kind of hops, including hop pellets. Specifications: Diameter: 5.9" Length: 11.8" Material: 800 micron 304 grade stainless steel mesh, with stainless steel support band and single hook.

Read more less

Use the StaVin Infusion Tube when you are making wines in neutral barrels and want to gradually integrate a level of oak compounds. With each 8-ounce load of the Infusion Tube, you will be adding only 33% of new oak flavors. The Infusion Tube is a convenient way to add oak incrementally to your neutral barrels without removing barrel heads. Crafted from high quality 304 grade stainless steel, the StaVin Infusion Tube enables the winemaker to control incremental amounts of oak integrated into the wine during fermentation, aging, or prior to bottling. The Tube is also easy to load and remove, which makes it sanitary. It can be removed from the barrel and easily cleaned. The Infusion Tube can be reused indefinitely, making it as ecological as it is economical. The tube accommodates 8 oz of Oak Cubes at a time. 24" L x 1 3/4"D with a 5" stem.

Read more less

This fine mesh filter screen is made of durable, food-grade plastic and perfectly sized to fit the 12" plastic funnel. It will fit snugly into the funnel to prevent the screen from moving and material from flowing around the sides of the screen. The fine No. 35 mesh is perfect for removing pulp or other small particulates, but many brewing applications require a coarser mesh and would easily clog the No. 35 screen. Specifications: Maximum Temperature: 158°F (70°C)  Diameter         5.5″ (13.97 cm) Mesh Size       No. 35  

Read more less

Replacement mesh liner for a 40L bladder press.  It is similar to a mesh bag but is open on both ends so it can slide over the bladder portion of the press.

Read more less

The accessory that turns your kettle / pot into a mash tun. All stainless steel, 12" long, 3/8" male NPT thread.

Read more less

The Kettle Spider is made from 304 stainless steel and features anti-slip silicone sleeves. The diameter of the opening is 3.75" and the arms are 9". The spider is designed to be used with mesh bags which can be secured with a drawstring, a 4" tri-clamp fitting, or keg lid o-ring.

Read more less