Best Selling Products
Replacement Malt Pipe for Gen 4 BrewZilla 35L
A replacement malt pipe for the Gen 4 35L BrewZilla. Note: This malt pipe is Not Compatible with Gen 3 or older BrewZillas or DigiBoils. Please note: due to patent restrictions in the United States, the malt pipe has been redesigned with one set of bottom feet. This model does not include the "two stage" malt pipe as advertised by KegLand and featured in previous MoreBeer! YouTube videos. Dimensions: 11.8" (300 mm) Outer Diameter 10.6" (270 mm) Inner Diameter 18.1" (460 mm) Tall
$74.99
Still Spirits Classic Gin
Creates a distinctive gin, of outstanding character. Clean tasting with strong juniper flavor and angelica spice. Each pack holds twin sachets and makes up 2 x 1.125ml (1.2 US qt) bottles. Mixing Instructions: Add one sachet contents to 1.125 L )1.2 US qt) of 40% ABV home-distilled neutral alcohol. Rinse out any remaining flavoring from the sachet with some of the alcohol. Ingredients: Humectant (E422, E1520), natural flavorings.
$8.99
#8 Breathable Silicone Bung
This bung has ventilation holes on the top with a silicone flap that lays tight to the surface. Gases from fermentation can escape through the holes and flap and no contaminants can get in. Used with larger mouthed glass carboys and small wood barrels.
$5.50 - $40.00
ForgeFit® Stainless Tri-Clamp Quick Disconnect (QD) - 1.5 in. T.C. x Female QD
1.5" tri-clamp with female quick disconnect. 304 stainless steel.
$13.99
Poppet Spring CMB Disconnects
Replacement poppet spring for all CMB ball lock disconnects.
$0.99
45 degree 1/4" Swivel Elbow
45 degree barbed swivel elbow stem and nut. Specifications: Barb with fit 1/4" ID tubing. Nut is a 1/4" flare fitting. 304 Stainless Steel.
$4.49
Neoprene Jacket & Recirculation Arm Cover | BrewZilla | Gen 4 | 65L
Add some insulation to your BrewZilla to get better boils! This neoprene jacket will help keep the heat in for quicker and more vigorous boils. Slap it on to speed up heating; take it off to speed up chilling. Also includes a neoprene sleeve for the recirculation arm to reduce heat loss during the mash. This jacket will fit Gen 4 BrewZilla 65l models. It is not compatible with older generations of BrewZillas and DigiBoils due to where the cutouts on the jacket are located. Features: 10% faster heat up time 50% less heat loss from boiler Fits the 65L BrewZilla Gen 4 Made from 8 mm thick neoprene which is easy to wash after use
$29.99
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) - 1.5 in. x 24 in.
304-type stainless steel tri-clamp extension tube with 1.5" clamp ends. 24" long.
$39.99
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) - 1.5 in. x 12 in.
304-type stainless steel tri-clamp extension tube with 1.5" clamp ends. 12" long.
$26.99
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) - 1.5 in. x 5 in.
304-type stainless steel tri-clamp extension tube with 1.5" clamp ends. 5" long. This is the same length as a Tee. It is used to swap instruumentation in and out of an established system.
$22.99
Hop Bong Sight Glass - 2 in. T.C.
The Hop Bong is a versatile pressurizable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters, but also as an inline carbonation/oxygenation accessory. This particular sized tri-clamp Hop Bong was designed for the FermZilla Tri-Conical and All Rounder fermenters with the new Tri-Clamp Adapted Pressure Lid. It can also be adapted to any 2" T.C. port in your system to use either inline or as a dry hopping device. The side port features PCO1881 male threads so you have the option to add a Ball Lock Cap. When used as a dry hopping device on top of your fermenter, this will allow you to purge your additions of oxygen by flushing them with CO2. When used as a sight glass below your fermenter, bubble CO2 from the bottom up via the Ball Lock Cap to rouse hops or carbonate finished beer. Constructed from Nylon 12: An autoclavable, extremely robust, and chemical resistant engineering plastic. Hop Pellet Capacity: 150–180g (5.2–6.3 oz)
$24.99
Italian Floor Corker with Chrome Jaws
This corker with chrome plated brass jaws folds flat into a box for storage when not in use. When assembled, You can cork standard wine bottles quickly and easily. The 4 jaw iris mechanism compresses the cork evenly, before pushing it into the bottle with a metal pin mechanism. The depth of the cork can be varied by changing the level of the nut on the metal pin. Assembly/disassembly: 3 parts ship unassembled and must be secured before use, and removed before storage; The metal handle (lever), the front leg, and the rear legs. Please Note: This corker is not suitable for use with synthetic corks, as the corker will crease the side of the cork during insertion which leads to a leak once the bottle is laid down for storage.
$199.99
Replacement PRV (65 psi)
Replacement pressure relief valve rated to blow at 65 psi. This is a direct replacement of the PRV featured on the KOMOS® CO2 regulator. The Green PRV can also be used with pressurizable FermZilla models for hydro testing. Note that under normal operation, the FermZilla should always be used with the Red PRV (35psi).
$6.49
Growler Filler - Older Perlick/Perl Faucets Models
304 stainless steel faucet insert with 12 inches of 5/16" ID draft tubing. This insert fits into older styles of Perlick and Perl faucets.
$9.99
200L (53G) Variable Capacity Tank - Flat Bottom
Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha. Includes: 304 Stainless Tank 304 Stainless Floating Lid Food-Grade Floating Gasket Air Pump with pressure gauge Connection kit for connecting gasket to pump Dry Airlock for tank Chrome Plated Spigot 200L Specifications: Nominal volume: 200 Liters (52.8 gallons) Effective volume: 200 Liters (52.8 gallons) Diameter: 50 cm (20 inches) Height: 120 cm (47 inches) Valve size: 1/2" BSP Thickness (Bottom X side, in mm): 1.0 X 0.7 *Please Note: Tank may differ slightly from image shown. Stands are sold separately. Due to size of this item, it is available for pick-up only.
$599.99
#30 Wood Basket Press
Traditional ratchet style presses are made with a pressed steel basin with an enamel coating. The basket staves are made of a hardwood and fastened with chrome plated bolts. Baskets are in 2 pieces for easy disassembly and removal of pomace. Also included are 6 hardwood blocks and two hardwood half-rounds to more efficiently and effectively press grapes and extend the reach of the ratchet. These presses come with a removable shaft which has a large nut on the bottom of the basin. The ratchet mechanism allows you to exert more pressure on the grapes than would be possible with a simple screw mechanism. The "number" (#) of the press refers to the diameter of the basket in centimeters. There is no direct relationship between the diameter of the basket and the capacity in gallons or the number of pounds of grapes it can hold.#30 specifications: Basket diameter: 12 inches Basket height: 17 inches Basket capacity: 8 gallons Manufacturer: Fratelli Marchisio (Italy) Due to size and weight, this item is available for pick-up only.
$799.99
Gen 4 65l (17.1g) Brewzilla
WiFi/Bluetooth Enabled RAPT ControllerThe RAPT Controller is mounted to the top of the boiler body, allowing for easy operation when you have the unit set on the ground. The controller can be tilted upwards to give you an even better view, or it can be removed from the BrewZilla entirely if you’d prefer to mount the controller on your wall or lay it down on a workbench. From the controller, you’ll orchestrate your entire brew day. Program mash steps, dial in element power, and operate the integrated pump all from one screen. But the RAPT Controller is much more than a beautiful, full-color display switch board. Once synced to the RAPT Portal, you’ll be able to track, record and monitor your brews online. No need for handwriting notes or punching brew day details into your phone – all of the data from your brew is automatically logged to your portal profile. This information doesn’t just include your mash profile; it also captures detailed information about your element power and pump activity, opening the door for very precise repeatability. And the RAPT Portal isn’t just a digital archive for your brew days. With your BrewZilla powered on, you can control your brewery from virtually anywhere using your phone’s web browser. Not sure when you’ll be home from work or your kid’s ball game going into extra innings? No problem! Before you head out, simply log into the RAPT Portal from your phone and tell the BrewZilla to start heating your strike water. Along with remote control, the portal enables you to program alarms and push notifications for all of your boil additions. We’ve all been caught up with a side task and failed to throw in that yeast nutrient or clarifying agent at the end of the boil, but the BrewZilla has the back of even the most forgetful brewer! But wait, there’s more! In addition to WiFi connectivity, the RAPT Controller is also a Bluetooth gateway device. KegLand is currently developing various Bluetooth devices such as the Bluetooth Beacon Thermometer and other sensors which will be compatible with your brewery upon release. The RAPT Controller is able to receive information from Bluetooth Low Energy (BLE) devices, adjusting its processes based on this new stream of information while simultaneously logging it to your RAPT Portal. With the Bluetooth Beacon Thermometer, for example, you’ll be able to feed temperature readings from the top of your mash bed to the controller. The controller will then compare this reading with the main temp probe reading at the base of the kettle and adjust element cycling based on these combined readings. Finally, the RAPT Controller WiFi connectivity allows you to update the controller’s firmware with a single click. Take advantage of new features and accessories as soon as they become available by simply keeping your BrewZilla connected to your local WiFi network. And again, the WiFi is already built-in! No need to come back for an expensive add-on accessory down the road. High Capacity Malt PipeWith an approximately 41.5 lb capacity, the BrewZilla can mash nearly 20% more grain than similar sized models of the Anvil Foundry and Grainfather G70. If you want to fill your fermenter with more than a 5-gallon batch worth of wort, or brew the highest gravity beer recipes, the BrewZilla is the brewhouse for the job. And the included malt pipe is just the beginning. If you want to expand your brewery’s grain capacity even further, KegLand makes Boiler Extension Kits and Extended Malt Pipes for that very purpose. The malt pipe features a perforated section at the bottom which improves mash recirculation flow without sacrificing efficiency. Concave Base with Center DrainingLeave no wort behind! The concave base with center drain means you’ll be able to extract every last drop of wort to your fermenter. If you’ve brewed in a traditional flat bottom kettle, this center drain may be a bit perplexing at first. Many brewers are used to whirlpooling after the boil to pull hop matter into the center of the kettle, then transfer out using a pick-up tube that pulls from the kettle wall in order to avoid sucking up the solids. But fear not! One of the key features of the BrewZilla is the false bottom protection screen. This screen avoids the need for doing a whirlpool, filtering wort as it transfers and blocking more than 95% of hops and hot break from getting sucked into the pump. This not only prevents blocked pump issues, it also increases the efficiency of your brewhouse by eliminating kettle loss from wort that may have otherwise been left behind. Ultra Low Watt Density ElementsThe concave base on the BrewZilla also allowed for larger heating elements with significantly lower watt density than other breweries. When a lot of energy is coming off of a small element, the local temperature near the element can be so high that it scorches the wort and causes caramelization. Lower watt density essentially means you can produce lighter color beers that would otherwise have fallen victim to caramelization effect. It also reduces that chance of boilovers and reduces stress on the elements which extends their life expectancy. Easy Access Built-In PumpThe built-in pump allows you to recirculate your wort during the mash for improved efficiency and more even temperature distribution. But it can also be used to transfer your wort from kettle to fermenter rather than relying on a gravity feed, and with the optional CIP Rotar, you can used the pump to clean your BrewZilla (or fermenter) after every use. During your brew day you’ll be able to control the pump from the RAPT Controller with a dedicated button for turning the pump on and off. Another feature you’ll find on the controller is adjusting the pump flow. This doesn’t control the actual volume of the flow (you can do that from the ball valve located on the recirculation arm), but rather cycles the pump on and off automatically based on your setting. At 100%, the pump remains on continuously. But at 80%, the pump will cycle to be on 80% of the time and off 20% of the time. This may not be a feature that every brewer thinks they need, but it’s an excellent way to avoid running the pump dry accidentally, as the time the pump is off allows recirculating wort to filter through the grain bed and back into the pump inlet. If you flip over the boiler, you’ll find the magnetic drive pump and all the plumbing is right at your fingertips. This means you don’t have to disassemble the base in order to access the pump for cleaning or maintenance if required. It also means the plumbing can be changed more easily too. For instance, the unit comes as standard with the plumbing from the pump feeding both the recirculation arm and the transfer valve, but you change this so the tap outlet bypasses the pump if you prefer. Perfect for DistillationIf you want to expand your lineup of homemade libations to offer Spirits in addition to Ales & Lagers, the BrewZilla makes an excellent pot still! Add the Distillation Lid upgrade and pair it with an AlcoEngine Copper Reflux Condenser or Copper Pot Still Top. AlcoEngine Stills have been selling on the home market for years and offer some of the most affordable, beginner-friendly stills you'll find. Features: Gen 4.0 Stainless steel construction 17.1 gallon total capacity with a finished beer output of 10-12 gallons WiFi/Bluetooth Enabled RAPT digital temperature controller Automatic step mashing with 6 programmable stages 220V power NEMA 6-30R plug Triple heating elements (2000, 1000 and 500 watts) Stainless steel 1/2 in ball valve for draining (don't have to use the pump) Immersion wort chiller included Stainless steel malt pipe/basket Stamped in volume markers Glass lid Magnetic drive pump for recirculation Recirculation arm Temperature reads in °F or °C Approximately 36" H (with recirculation arm) x 16" D Recommended max. grain bill - 41.5 lbs AlcoEngine Still ready with the purchase of a Distillation Lid Pump Specs: Max Capacity: 2.9–3.1 gal/min Max Head: 4.9–6.8 ft. Poles: 2 Frequency: 50–60Hz Power: 6 watts Current: 60 mA Speed: 2600–3000rpm Duty Cycle: Continuous Capacitor: 2µF Input/Output: 13mm barb Water Resistance: IPX2
$799.99
Stavin French Oak Cubes - Medium Toast - 8 oz.
French oak provides a fruity, cinnamon/allspice character, along with custard, milk chocolate, and campfire/roasted coffee notes. The campfire/roasted coffee notes are more noticeable with higher toast levels. As the toast levels increase, the fruity notes for the wine changes from fresh to jammy to cooked fruit/raisin in character. Cubes (also known as Oak Beans) offer the home winemaker control and flexibility during red and white fermentations and aging. StaVin’s slow fire-toasting creates the same traditional flavors found in the production of fire-toasted barrels. Unlike Fermentation Chips, Cubes offer a slower, more complex extraction, matching barrel flavors. Best results will be achieved by fermenting with the Cubes and leaving them in the wine for the duration (until filtering and bottling). Using Oak Cubes aids in the stabilization of color and helps cross-link tannins, which builds structure in wine. For 100% New barrel impact: Use 1.5 lb (680 g) per 60 gal (227 l) 8 ounce package.
$24.99
Duotight Ball Lock Quick Disconnect (6.35mm) - Gas In
The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world. Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required This particular ball lock disconnect has been designed for use with EVABarrier 6.35 mm OD Tubing. Due to the integrated Duotight fitting the line will simply push directly into this fitting. Ball Lock Quick Disconnect - Gas In Direct connect 6.3 mm OD EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Disassemble by hand for quick and easy cleaning Duotight Ball Lock QDs are offered in three sizes that correspond to the outer diameters seen on our line of EVABarrier Draft Tubing. 6.35 mm OD – features a very tight 3 mm ID that requires only 3.2 ft of length for adequate flow resistance. This is the ideal size for mobile draft or if you want to keep your kegerator as tidy as possible. 8 mm OD – the most common OD size of EVABarrier tubing. This size comes in two IDs (4 mm & 5 mm) and pairs up with the lion's share of Duotight fittings and accessories. 4 mm ID is our most recommended size for beverage lines, requiring 5-6 ft. lengths. 5 mm ID is commonly used as gas line or when 10-12 ft. beverage lines are required. 9.5 mm OD – suitable for gas lines or long draw beverage lines. At 6.3 mm ID, this size is ideal for beverage lines that will be 20 ft. or longer in length.
$7.99
R-HST Dry Wine Yeast
Produces premium, crisp white wines destined for aging. Developed for Riesling. Best used when the most transparency between fruit and a finished wine is sought. Developed for Riesling. Alcohol tolerant to 15%. Use 1 gram per gallon.
$2.99 - $19.99
BrewZilla Lift-N-Lock Pulley System
This heavy-duty pulley is made from strong nylon strapping, laser cut 304 grade stainless steel and is capable of lifting large heavy loads with ease. It's the perfect pulley for lifting the heavy malt pipe from your BrewZilla or other all-in-one system. It's a bit more expensive than other pulley systems, but there's no comparison when it comes to easily lifting or lowering the malt pipe. The included strap is 10m long by 25mm wide (32.8 ft. x 1 in.). The pulley system enables you to multiply your pulling force by 4 times. If you apply 60 lbs of pulling force, the pulley can lift 240 lbs with relative ease. Be sure that the beam you mount the pulley to is rated for the total amount of force being applied i.e. pulling force plus load weight, so for this example 300+ lbs.
$69.99
Motorized Grape Crusher/Destemmer
Does not ship, for In-Store Pickup only. Partially Stainless Motorized Crusher Destemmer with spring loaded, adjustable rubber rollers. Rubber rollers are preferred for a gentler crush. Rollers are spring loaded to allow/protect for the passing of hard item like a rock. They do offer a degree of adjustabiliy, however no hobby model crusher destemmer will allow rollers to be separated far enough to not crush the grapes. These types of crusher destemmers must be fed grapes in a systematic way. Overloading the hopper will bog down the machine. Internal sainless grate slides out for easy cleaning. The Crusher/Destemmer can be purchased by itself or alongside the Stainless Stand & Chute. Features: 304-Type Stainless Steel Receiving Bin, Screw Feed, and Destemming Basket. Enamel body. A Screw Feed drive receiving bin for continual, faster, hands-free operation Adjustabe Rubber Rollers (adjustment on all small machines, regardless of make, is limited to 5mm because of the way the gears mesh.) A powerful 110V 1HP motor which provides an hourly production of approximately 3000 lbs. Replacement parts are available Big, Red Emergency stop button on motor shuts down the machine in a hurry to help reduce chance of accident Overall dimensions: 47" long x 19.6" wide x 25" high. Weight: 118 pounds (54KG.) Imported from Italy from Enoitalia.
$1,499.99 - $1,689.99
KOMOS® Rubicon Cold Plate Jockey Box (2 Tap)
The KOMOS Rubicon Jockey Box is perfect for low-volume home applications like picnics, cookouts, and tailgaters. Built around the ultra-tough, rotomolded Rubicon Cooler and featuring the aluminum cast Slimline cold plate for compact, efficient cooling. The cooler comes with pre-drilled holes and only takes minutes to assemble. Along with the cooler and cold plate, this draft box kit includes stainless steel Intertap faucets, stainless shanks, self-closing faucet springs, tap handles, EVABarrier draft line, and Duotight fittings for all connections. Rubicon CoolerRotomolded body makes this cooler virtually indestructible, while high density polyurethane insulation and compression lid will keep the contents ice-cold for days on end. Rope handles with molded grips make the Rubicon easy to move around, and lockable lid will keep out beverage bandits and bears alike. Slimline Cold PlateThe KOMOS Slimline Cold Plate is made from rugged aluminum casting with a large thermal mass for excellent heat absorption. High conductivity aluminum alloy aids the heat transfer as your beverage travels through the internal 18 ft. long stainless steel lines. Duotight Fittings & EVABarrier Draft Tubing Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing. EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. We recommend adding Duotight fittings to use for your keg connections as well, not included. Features: Rubicon Cooler Rotomolded body High density polyurethane insulation Lockable compression lid with high quality seal Polyester rope handles with molded grips Rubber feet Side drain outlet 23.5" x 16.25" x 16.5" Slimline Cold Plate Aluminum cast 18 ft. internal lines made from 304 stainless steel 1/4" male flare connections 15" x 10" x 1" 2 x Intertap Stainless Faucets w/ Self-Closing Springs 2 x Intertap Stainless Draft Shanks 2 x Black Plastic Tap Handles 39 ft. roll of EVABarrier tubing (8 mm OD x 5mm ID) Duotight push-in fittings for all connections
$399.99
BrewBuilt CoolStix™ for Carboys
The BrewBuilt CoolStix is a revolutionary cooling solution for carboys. It is easy to clean, easy to setup, and cools quickly and efficiently. The CoolStix uses a submersible pump to circulate cooling solution and a digital temperature controller to regulate flow. When the controller's temperature probe detects that the fermentation temp is getting too hot, it will power on the submersible pump to run ice water or glycol through the CoolStix. Once the temperature stabilizes, the controller will shut off the pump and stop circulation. You Will Also Need: Submersible Pump Temperature Controller Thermowell 3/8" ID Tubing 3-Hole Hood or Stopper Ice Bath or Glycol Chiller CoolStix Specs: Diameter - 1/2" Overall Length - 25½" Bottom of CoolStix to Lower Assembly - 22" Width from CoolStix to Barb - 5½" Made from 304 Stainless Steel
$79.99
Melba™ Pellet Hops
Melba™ hop pellets are typically used as an aroma hop and have described as having passionfruit, grapefruit, citrus, and summery characteristics. Grown in Australia. Specifications: Brewing usage: Aroma Aroma: Passionfruit, Grapefruit, Citrus, Summery Characteristics Alpha Acids: 7.0-10.0% Beta Acids: 2.5-5.0% Total Oils: 2.0-4.0% Co-Humulone % rel.: 25-35
$2.19 - $21.99
Weyermann Spelt Malt - 55 pound bag
Spelt malt is used for producing full-bodied, top-fermented beers. Spelt is an ancient grain and is known to possess a number of health benefits. For this reason, spelt was the favorite grain of the medieval pioneers of today's health movement. German nun, Hildegard von Bingen, born in the year 1098 is famous for using spelt in her recipes. Likewise, spelt beer, is considered highly digestible and conducive to good health. Weyermann® Spelt Malt conveys a strong emphasis on typical spelt aromas, along with delivering soft malt notes along with hints of hazelnut aromas, and biscuit flavors. Use like wheat malt. Specifications: Color °L : 1.6 - 3.1 Moisture % Max : 6 Protein Total % : 11 - 17 Extract FG Min : 80 Usage Rate : Up to 60% 55 pound bags of grain are excluded from flat rate / free shipping offers.
$118.00
Funnel Screen - Fits 12" Plastic Funnels
This fine mesh filter screen is made of durable, food-grade plastic and perfectly sized to fit the 12" plastic funnel. It will fit snugly into the funnel to prevent the screen from moving and material from flowing around the sides of the screen. The fine No. 35 mesh is perfect for removing pulp or other small particulates, but many brewing applications require a coarser mesh and would easily clog the No. 35 screen. Specifications: Maximum Temperature: 158°F (70°C) Diameter 5.5″ (13.97 cm) Mesh Size No. 35
$4.49
RHT Hex Nipple, 2.5" x 1/4" NPT
This brass hex nipple is 2.5" in length and has 1/4" NPT, right hand threads (rht). It is commonly used for secondary regulators.
$6.99
Gas Shut Off Valve
This shut-off valve is for draft beer gas regulators & gas distributors. Specifications: Right Hand 1/4" NPT (National Pipe Threads) 3/8" O.D. (To fit 5/16" I.D. Gas Hose) Does not include a check valve.
$14.99
Grain Millers Flaked White Wheat - 50 pound bag
Flaked White Wheat offers the benefits of unmalted wheat in a convenient flaked form. Unmalted wheat has a strong grain flavor, and a very light straw color. It is used in many traditional Belgian styles to add flavor and cloudiness, and improve head formation. Unlike raw, whole grains, the starch in flaked wheat is pre-gelatinized, so a separate cereal mash is usually unnecessary. However, the protein content is high. Depending upon use, a protein rest may be required. Use in the production of Belgian Wit beers. Use up to 40% as a cereal adjunct in the total grist. Use 0.5-1.0% to a standard brew to increase foam stability. 50 pound bags of grain are excluded from flat rate / free shipping offers. Also available by the pound.
$61.00
Dingemans Wheat Malt - 55 pound bag
Dingemans Wheat malt adds grainy wheat flavor and haze to wheat beers and other styles when used at up to 70% of the grist. Adding wheat malt in smaller amounts will enhance the head retention of any beer. Suggested usage: Wheat beers, Hefe-Weizen, Light beers, Belgian Wit, Saison, Belgian Tripel, and wheat-based fruit beers. Specifications: Lovibond: 1.5-2.0 Usage: to 70% Moisture: up to 6.5% Extract% (dry basis): 83 Protein Total: 13% max Origin: Belgium Maltster: Dingemans 55 pound bags of grain are excluded from flat rate / free shipping offers. Also available by the pound.
$83.00
Weyermann® Munich Type 2 Malt - 55 pound bag
Weyermann® Munich Type 2 malt ('Dark Munich') is a kilned lager-style malt made from quality, two-row, German spring barley. Usually used a specialty malt, it has a high enzyme content despite its color, and can constitute up to 100% of the grist. It produces robust malt characteristics, including full body, deep amber color, and smooth mouthfeel. The flavor is strongly malty and the rich aroma has notes of caramel, honey, and bread. Munich malt is typically used in dark lagers and ales, especially Munich-style lagers, various bock styles, and German festival beers like Märzenbier, Festbier, and Märzen. Specifications: Color °L : 8.0-9.9 Moisture % Max : 4 Protein Total % : 9.5-12.5 Extract FG Dry : 78 Max Usage Rate % : Up to 100% 55 pound bags of grain are excluded from flat rate / free shipping offers. Also available by the pound.
$81.00
3/8" FPT x 1/2" MPT Bushing
3/8" FPT x 1/2" MPT Bushing 304 Stainless Steel
$8.49
Premium Breathable Silicone Carboy Hood
When set to the open position, the bung acts as an airlock and allows the release of CO2 while maintaining a seal against oxygen coming in. This makes the bung ideal for alcoholic or malolactic fermentations. When fermentation is over and you no longer want the bung to "breathe" out, you just push the center cap into the bung to create a firm seal and it becomes a solid stopper!
$15.99
Cannular Pro 300 Chuck for 32oz Crowlers
Carbon Steel Chuck for the Cannular Pro Semi-Auto Can Seamer. This chuck can be swapped in for the standard chuck so you can change from 16 oz or smaller cans to 32 oz Crowlers. Suitable for Ball 300 End aluminum crowler cans. Note: This chuck is not compatible with the standard manual Cannular unit.
$39.99
OYL-400 Bananza™ Ale - Omega Yeast
Description: Ripe banana esters (with a hint of pear) make this new, Omega Yeast original a standout for pastry stouts, milkshake IPAs and other modern ales. For prime banana esters, pitch at 68°F (20°C) and let free rise to 72-75°F (22-24°C). Unlike its parental Hefeweizen strain, Bananza is versatile because it is non-phenolic and therefore incapable of producing clove flavors that would mask its pure banana profile. Flocculation: LowAttenuation: 73-77%Temperature Range: 64-75° F (18-24°C)Alcohol Tolerance: 10% We ship all liquid yeast with an ice pack and insulated bubble envelope. Beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.
$12.99
