Best Selling Products

Dingemans Munich malt has a pronounced malty flavor, aroma, and an orange - amber color. It improves the character and full body of a beer. Suggested usage: Amber beers, Ales, Stout, Bock beers, Lagers Specifications: Lovibond: 5.6-6.7 Usage: to 80% Moisture: up to 4.5% Extract% (dry basis): 79.5 Protein Total: 12.0% max Origin: Belgium Maltster: Dingemans 55 pound bags of grain are excluded from flat rate / free shipping offers. Also available by the pound.

Read more less

Weyermann® Pale Rye malt is made from high-quality German rye to exhibit classic rye malt characteristics. It lends a biscuit-like flavor, smooth - almost oily - component, and malty-sweet aromas with hints of bread and honey. A great choice for rye beer styles or to spice up almost any brew. Suggested usage: Belgian Saison and Rye IPA Specifications: Lovibond: 2.0-4.3 Usage: to 30% Moisture: up to 6% Extract% (dry basis): 81 Protein Total: 11.5% max Origin: Germany 55 pound bags of grain are excluded from flat rate / free shipping offers. Also available by the pound.

Read more less

A Stainless Steel pump housing is food-grade and nearly indestructible. Stainless steel is the material of choice for professional breweries because it is a durable, food-grade metal that can withstand caustic chemicals and can also be effectively sanitized. This housing has a 3/4" mpt for the center inlet and a 1/2" mpt outlet.The magnetic drive acts as a clutch allowing the user to put back-pressure on the pump to slow down flow. With a ball valve on the outflow, you can slow flow all the way to nothing. Since it is a magnetic drive, it is not self priming, you must put the pump under the level of the liquid source. This pump has an installed bracket to allow mounting. This is a tough little pump with a 1/25 hp, continuous-duty 1.4 Amp motor which can be run non-stop for extended periods. This pump has a maximum flow of 7.2 GPM with a maximum head of 12 feet. For an example of typical usage: with a head of 6' it will pump 3.25 GPM and with an 8' head it will pump 2.5 GPM.Motor requires 115v 50/60HZ power requirements. 3/4" mpt center inlet 1/2" mpt outlet 7.2 gpm maximum flow 12 foot maximum head 115V 50/60HZ power requirement. 6 foot power cord 250 Fahrenheit or 121 Celsius max liquid temperature

Read more less

The Monotight Elbow Piece is suitable for 6.35 mm (1/4") PE tubing or most lines with a 6.35 mm outer diameter. It is designed for use with stiff PE tubing that is commonly used in water treatment equipment, water filters, reverse osmosis fittings, and other appliances that are directly connected to water lines. These fittings will not fit 8 mm or 9.5 mm OD EVABarrier line Monotight push in fittings have been engineered for maximized performance in both gas and liquid applications. No other push ins on the market have EPDM o-rings. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-ring made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)  Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.

Read more less

If you use different kegs and couplers on a normal basis, save time by add quick disconnects to your draft systems gas line tubing. Place a quick disconnect fitting in the gas line and no tools are needed to disconnect from the gas source. Simply pull back the sleeve on the female side and the connection separates and the gas is shut off. Note: To make a complete set please order the Disconnect Air Coupler. Specifications: Connection: Male Side Length: 1-1/4" Barb: 3/8" O.D. (to fit 5/16" I.D. Gas Hose) Material: Brass (not chrome plated)

Read more less

Air Still Companion Pack includes: Attractive 10 L (2.5 US Gal) bench top Fermenter with Tap and Carbon Cartridge lid system to neutralise odours Graduated Collector for collecting from the Air Still Carbon Cartridge Filter System with Carbon Cartridge Holder and Filter Container Ceramic Boil Enhancers and Distilling Conditioner Click here to download the Air Still Companion Pack instructions.

Read more less

Premium, compact immersion chiller made with 25 feet of 3/8", USA made copper tubing. It is intended to chill up to five gallons of hot wort in under twenty minutes.  Specifications: (2) 5' lengths of clear vinyl tubing (3) strong stainless steel hose clamps (1) 3/4" heavy duty female swivel garden hose fitting Chiller dimensions: 9" coil diameter 7.5" coil height 20" inlet/outlet height

Read more less

The Escali Granda Digital Scale features a durable stainless steel platform and easy to read wired remote display. Perfect for weighing malt, hops, fruit, etc. Stainless Steel PlatformThe stainless steel platform is durable and easy to clean.Remote DisplayThe easy to read remote display is connected with a coiled extension cord.Parts CountingCount large quantities of small items with the accuracy and speed of a digital scale.Tare FeatureReset the scale to zero weight to measure multiple items or subtract the weight of container.Automatic Shut-offWhen operating on batteries the scale will turn off after three minutes of inactivity to help conserve and extend battery life. Specifications: Capacity: 265 lb (120 kg) Increments: 0.05 lb (0.02 kg) Units: kg, lb Platform Dimensions: 10.63 x 10.63 x 1.63 in Display Dimensions: 6.75 x 3.5 x 1.5 in Battery: One 9-volt (included) AC Power Adapter: Included

Read more less

The Grainfather S40 brewing system has a 12 gal (46L) capacity, allowing you to create 11 galllons (40L) of beer every time that you brew. This product has a high-grade stainless-steel build and is packed full of features to make every brew easy. Free Shipping to the Lower 48 States.  Drop ships from distributor via FedEx ground. Please allow additional time for processing. Please Note - this system comes standard with a NEMA 6-15P plug, and requires access to a 220v-240v power supply. Features: S40 body built with sleek 304-grade stainless steel Easily manage heating using the digital controller with color display Built-in pump for maximum brewing efficiencies Easily cool wort with the stainless-steel immersion chiller Recirculation arm for more efficient mashing Backed by a 2-year warranty What's Included Grainfather S40 Grain basket Lid Immersion chiller and hoses Recirculation arm and wort sprayer Connection fittings Specifications: Size: 27"x 19" Weight: 40 lb. (18kg) Capacity: 12 gallon (46L) Batch Volume: Maximum: 11 gallon (40L) Minimum: 3 gallon (10L) Grain Bill: Maximum: 22 lb. (10kg) Minimum: 11 lb. (5kg) Power: 2300W, 240V Connectivity: None Instruction Manual

Read more less

These regulators work great for reducing your main pressure from 0-150 psi. Suitable for both gas and liquid. The 8 mm Duotight inlet and outlet are compatible with EVABarrier tubing. Specifications: Pressure Range: 0–150 psi Suitable for mains water pressure Liquid and gas compatible Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Wall mountable Made from non-corrosive acetyl, nitrile, and stainless parts

Read more less

Just like the Grainfather G30, the G70 is your true brewing companion when it comes to making beer from grain. Thanks to the 70L capacity, homebrewers can now produce more beer to share or commercial breweries now have a unit that's small enough for pilot testing. It also has a smart controller with built-in wireless connectivity and mobile app integration for step-by-step remote-controlled brewing. The G70 gives you everything you need in one compact package that can be used virtually anywhere. Limited supply in-store available for pickup. Due to the weight and dimensions of the Grainfather G70, this item is shipped palletized freight from the vendor to prevent damage from occurring in transit.  Please allow additional time for processing. Product Description 70L of innovation, consistency and power have helped to create one of our most compelling systems to date. The inherent strength and safety capabilities of the G70 are matched by its bold, contemporary look and new smart brewing technologies. From the creators of the original award-winning all-grain brewing system, the Grainfather G70 represents the next level in brewing equipment. We’ve stepped up our game to bring you a smarter brewing system with a larger 70L capacity, improved design, wireless control, app integration and the same Grainfather signature quality guarantee. Whether you're a homebrewer looking to raise the stakes or a commercial brewery looking to bring authenticity back to your pilot batches, the G70 is your true brewing companion. It gives you everything you need in one compact package that can be used virtually anywhere. Features:  Two-stage false bottom. The conical base allows a false bottom with an inner collar to sit in the recess of the base. Early testers used 600gs of hops and saw full flow through the pump. This is very effective. Bespoke 3.2 kWh concealed conical heating element. Makethe most of the power available. The element covers around 80% of the base and is mounted using a thermal paste rather than braised. This moves the heat efficiently upwards, minimizing the loss of heat to areas where it’snot needed. As it’s spread in a wide area, hot spots and scorching are very unlikely. Also, most solids settle on the false bottom, so they won’t touch the elements. As it’s concealed, it makes cleaning easy too. Integrated sight glass for easy volume readings during sparging. Instead of trying to judge the level of your preboil, you can easily sparge until you reach preboil volume. It’s also easy to clean after every brew. The sight glass cap can be replaced with the sight glass cleaning barb to easily recirculate a cleaning solution. Bottom drain below the false bottom means minimal dead space. High temperature, high flow rate, food-grade pump. With an 8L per minute flow rate, you can transfer your brew efficiently and safely. Heavy duty handles on the outside of the G70 unit. Convenient side entry recirculation. Rather than up and over, the G70 has a built in port on the side of the unit. If the pump is accidentally switched on, the wort will be safely directed back into the boiler. New rolled edge, mash plates and hop filter for increased strength and easy set up. There’s no more silicone seals, as the plates now have a smooth finish, making them more robust, hard-wearing and easy to install. Compared to the G30, the G70 is wider but not that much taller. Comparatively, the draining is still quick from the basket and there’s less likelihood of stuck sparges as the draining surface area is bigger. Safety aspects including locked in support ring, heavy duty, no slip brackets on the grain basket and protection from knocking the ball valve open. Automatic heat sensors and safety cut-out for dry boil protection. Color LCD controller screen with magnetic mounting for easy viewing from all angles and manual control. Glass lid with handle. Ball valve for sampling/draining. This runs in line with the pump so it’s particularly helpful when draining the cleaning water. The water runs out quickly, emptying the unit in no time. Huge Wort Chiller included. Despite the volume being more than double, cooling times remain around the same as the G30 thanks to a more powerful pump, efficient false bottom and bigger wort chiller to match the wider unit.The large size means it needs to be positioned away from the G70, however this is made easy with longer silicone tubing attached as standard. Lifting bar included with winch lifting hook. Use the bar for a two person lift or with a stable winch system for individual brewers to lift the grain basket. Large dual-stage hop filter provides a large surface area to allow for a hopping rate of up to 1.5kg, which also reduces pump load and blockages. Robust stainless steel body and excellent build quality. SupportThe Grainfather is fully supported around the world by a fantastic support team who love brewing just as much as you do. Our support team is here for any technical enquiries on brewing or how the Grainfather works, as well as general customer service enquiries. All Grainfathers come with a 3 year warranty. Grainfathers purchased directly from the Grainfather website also come with a 30 day satisfaction guarantee. This means, if you are not fully satisfied with the Grainfather you are welcome to return it within 30 days for a full refund.  Instruction Sheet Tech Sheet  

Read more less

No More Spillovers! Unlike other tap timers that simply measure time, this Fill-O-Meter measures volume of water and will automatically turn off when the specific volume of water is dispensed. We recommend setting up the Fill-O-Meter with either Duotight fittings, Type A Camlocks, or Quick Disconnect fitting. Thread tape will be required for the Camlock. Use sparingly as too much plumber's tape can damage the plastic thread. And it is very important to never overtighten!  Displays real time flow rate and volume (Liters/Min or Gallons/Min) Accurately measures and controls volumes at flow rates from 1-30L/Min (0.26-7.9Gal/Min) Never overfill or spillover again Splash resistant housing Great for filling pools, tanks, brewery hardware, distilling gear, mixing liquid and many other applications Integrated flow meter and solenoid valve Illuminated display for usage in the evening Integrated sound alarm Easy 1/2" BSP Inlet and Outlet Automatic failsafe - flow is stopped if the unit loses power Important Notes:DO NOT flow liquid the wrong direction, it will break the unit.DO NOT overtighten fittings onto the 1/2" ports.DO NOT exceed temperatures greater than 40°C through the unit. Specifications: Flow Range: 1-30L per minute Temperature Range 0°C to 40°C  LCD: 3 inch back lit display Housing Material: ABS Input/Output threads: BSP 1/2" Pressure Rating: 0-12bar (0-180psi) Accuracy: +/- 5% Please Note: Accuracy can be improved with stable flow. Repeated start/stop or variation in water supply can have negative effect on accuracy. If you are noticing innaccurate fill levels, see the instruction manual for calibration instructions. Instruction Manual Download

Read more less

AlcoEngine copper pot still condenser with garden hose quick disconnects for water flow. This pot still design has been created to allow the delicate compounds that form the complex structure of many whiskeys and gins.  This iconic vee shape still has been created to capture the vital esters, aldehydes and phenolic compounds that are necessary to give the final spirit a complexity that simply cannot be created any other way. Use the custom lid to use with a Robobrew or the Turbo Boiler as the base for this still top. Note: Pictured boiler not included. This item will not be sold or shipped to the following states: Kentucky, Maryland, North Carolina, or South Carolina. Instruction Sheet Download

Read more less

Spike Brewing's Solo basket is designed for both convenience and functionality. Purposely built with all stainless steel for increased durability and ease of cleaning. This basket will literally take hours off your brew day and cleaning! Features & Specs: Uses only solid 304 stainless steel; no bags or mesh that can tear Sanitary welded coupler design (done at Spike's facility in Milwaukee, WI) 1.2mm thick walls Thick stainless steel hooks on basket easily holds wet grain on the kettle lip during vorlauf or while the basket drains Bottom of the basket features precision-lasered slits matching the false bottoms on Spike's commercial brewing systems Basket has tapered design to promote good flow through the grain bed Limited availability in-store.  Drop ships from vendor.

Read more less

Spike Brewing's Solo basket is designed for both convenience and functionality. Purposely built with all stainless steel for increased durability and ease of cleaning. This basket will literally take hours off your brew day and cleaning! Features & Specs: Uses only solid 304 stainless steel; no bags or mesh that can tear Sanitary welded coupler design (done at Spike's facility in Milwaukee, WI) 1.2mm thick walls Thick stainless steel hooks on basket easily holds wet grain on the kettle lip during vorlauf or while the basket drains Bottom of the basket features precision-lasered slits matching the false bottoms on Spike's commercial brewing systems Basket has tapered design to promote good flow through the grain bed Limited availability in-store.  Drop ships from vendor.

Read more less

3-way horizontal gas manifold without safety pressure release. 3/8" barbed inlet (3) 5/16" barbed shut-offs Shut-offs do not include check valves Aluminum body

Read more less

Description The optional splash Guard for the Cannular Pro Semi-Auto Bench Top Can Seamer.

Read more less

The long awaited MaltZilla is finally here. A large amount of research and development has gone into designing, manufacturing and testing the MaltZilla Diamond Mill. With an integrated 24V Motor, the MaltZilla is powerful enough to chew through popping corn kernels with ease. The mill works on voltages from 12-30V DC, and the higher the voltage the faster the mill will spin, although 24V is recommended for optimum speed and grist results. The unit does not come with a power supply. When purchasing the unit, you have the option of pairing it with either a power supply with 110V plug, or with a 6 ft. long cord with Anderson plug and alligator clips. The power supply is straight forward, and allows you to plug the unit into a standard 110V power socket. The alligator clips give you the option to power the unit from a battery.   Knurled Steel vs. Diamond Coated Rollers Historically other mill manufacturers have made grain mills from steel. In some better quality mills they harden the steel so that the knurling stays sharp for longer and continues to draw grain. But even the knurling on hardened steel will go blunt and this reduces the mills ability to draw grain well. Other manufacturers attempt to solve this problem by using geared rollers so the rollers grab the grain slightly better or using 3 rollers whereby the first two rollers with a larger gap force the grain into the third roller. These options in our opinion do not solve the real issue, which is that all of these steel rollers go blunt especially if hard grains are used like wheat or corn.   In a commercial setting, it’s not uncommon to send the rollers off to a metalworking factory to re-sharpen and re-knurl, however, this is often uneconomical and a hassle to do. For smaller homebrew customers they might just end up throwing the mill away and purchasing a new one.   The MaltZilla Diamond Mill is quite a different mill design, and it’s the first in the world to use diamonds impregnated into the surface of the roller. Even after many tons of grain are processed through the mill, the diamond surface will stay just as sharp as it was on day one. The sharpness of the diamonds really draws grain exceptionally well and even when hard products are used, such as corn, the diamond rollers simply smash it to pieces.   Sheer Instead of Chop Most mills require aggressive knurling to push into the grain and “chop” the grain as it passes through a tight gap, which means your grains are often chopped in half. The MaltZilla works on a different principle and gap setting is not as critical.  The MaltZilla uses impregnated diamonds to grip the surface of the kernel and the friction of pulling the grain through the gap causes a sheering action. When set up correctly, the sheering action can leave the entire husk intact, reducing the chance of stuck sparge and improve efficiency, while still opening the husk enough that the entire contents of the kernel is available to the mashing process. The 70mm diameter rollers are double the diameter of many other mills.  The large diameter significantly improves the crush and assist in drawing the grain in better.   Integrated Motor You generally would not purchase a car without an engine, so why would you purchase a grain mill without a motor? Milling grain has an optimum RPM— too slow and it will take you a long time, too fast and you will end up with excessive powder. The hand crank is really a pain in the backside and using a drill simply doesn’t give you the speed control that you require and often results in burning out your drill. The MaltZilla has an integrated motor with a very constant RPM putting out optimum RPM with an integrated gearbox. The high torque and sealed construction make it ideal for a brewing environment, as the motor is well sealed from moisture and grain dust.   The motor is seamlessly integrated into the side body of the mill. Being DC, the motor is safer than higher voltage AC especially in an environment where washing down the area with a hose is likely to happen. The DC motor is also reversible so the direction of spin can be changed based on the polarity. This is particularly useful for over-mount and under-mount installation.   Over-Mount and Under-Mount Installation Traditionally, most other mills just sit on a board where they are moved from one bucket to another. The MaltZilla has multiple different mounting configurations. It can be over-mounted to a board like most mills are, but if you want a seamless finish to your garage/brewing area, you can mount the mill under your counter where it’s concealed and out of the way. Simply lift up a small opening in the top of your benchtop, drop in your hopper, pour in grain and run the mill.  When you are done, remove the hopper and conceal the opening.   There is also a PPE MaltZilla Base Board available for over the bucket installation or designing your own mill stand.   Grain Hopper This unit does not come with a grain hopper. We recommend using a large funnel with a shortened spout, or a repurposed gallon-sized water bottle. The MaltZilla Aluminum Hopper is currently in development and available for pre-order.   Specifications: Power: 12-30V DC Anderson Connector Plug Grain Inlet ID: 2-3/16" Grain Inlet OD: 2-3/8" Weight: 11 lbs

Read more less

Want to bottle directly from your ball or pin lock keg using the Tap Cooler Counter Pressure Bottle Filler? This beer valve connector tube assembly will allow you to do just that! Setup is a snap. Simply remove the faucet fitting on the Tapcooler filler, attach the valve end, attach a ball (or pin) lock connector into the included swivel nut set on the tubing, and hook to your keg, and get to bottling! The valve acts as the beer faucet normally would, starting and stopping flow directly from the keg. The attached tubing is 2 meters (about 78 inches) long, giving you plenty of versatility in your bottling range. Another great accessory from Tapcooler! Tapcooler and ball lock disconnect not included.

Read more less

The Tapcooler extension tube is perfectly suited to provide the counter pressure filler a bit of extra space for the bottles where there is not enough room to fit them directly under the tap. The one end of the connection hose is designed to screw into the top of the filler unit and the other end of the tube is designed to screw into the filler unit's removable tap nozzle insert. Includes two small o-rings to seal the extension line on either end (there is already an o-ring seal inside the filler unit when the tap nozzle insert is removed). Tubing (based on length chosen) Stainless steel faucet fitting Stainless steel Tapcooler fitting Required o-rings for sealing purposes Comes pre-assembled!

Read more less

A soft wooden spile allows built up Co2 to escape from the cask (firkin) through the porous wood.

Read more less

A keystone is used to seal off the top (outlet) in a cask (firkin) prior to being tapped.

Read more less

Inserted after the cask has been filled with ale, with the plug displaced prior to dispensing.

Read more less

Best for Camembert, Brie and other white molded cheeses. This wrap is micro-perforated to allow the cheese to breathe over a 6-10 week period during which the external white mold can infuse the interior. The dull side of the paper is designed to absorb any excess moisture while the shiny side with holes protects the cheese from dying out whilst still allowing the cheese to breathe and develop in flavor and aroma. 9" x 9" (240 mm x 240 mm) 10 Pack.

Read more less

With over 100 recipes ranging from vinegar drinks, spirits, and sodas, you will craft and enjoy drinks and cocktails sourced from local and wild ingredients.

Read more less

Stainless steel weldless bulkhead. 1/2" compression x 1/2" MPT (male pipe thread)

Read more less

Best for long term refrigerated storage of your finished cheeses. Also used for maturing wash-rind cheese.The waxed coated paper is waxed both sides which helps to retain moisture in the cheese while still allowing the cheese to breath and further develop without drying out. The wrap is perfect for wrapping both soft and hard cheeses before selling, giving away as gifts, as well as prolonging their shelf-life in the refrigerator. This wrap is also excellent for maturing wash-rind cheeses. 19" x 19" (480 mm x 480 mm) 10 Pack

Read more less

Shank mounting flange, 2" diameter, with 1/4-20 set screw.

Read more less

The Still Spirits Turbo 500 reflux condenser works on the principles of ceiling temperatures, where it prevents chemical substance above a certain boiling point being processed. Unlike other reflux condensers on the market, the Turbo 500 works with a focus on the water flow and controlling the temperature of the water flow out. Assuming that the temperature of the water flow is stable, it is able to create a ceiling threshold temperature based on the water flow out.

Read more less