Regulators & Repair

Does not ship.  In store pick up only. Swap out your empty CO2 cylinder with a full one. Tanks will be swapped with the same material as brought in. Tanks must be aluminum and certification no older than 5 years. Cylinders that are out of compliance will not be accepted.  

Read more less

The KOMOS industrial gauge regulator aims to be the last regulator you'll ever need. Large body and precision diaphragm provide high flow rates, and pressure settings are quickly and easily dialed in the with hand knob. The pressure gauges are made from thick stainless steel and come with rubber bumpers for an extra layer of protection. Triple-scale dial faces read in psi, bar, and kPa. Includes a 1/4" flare fitting with barbed outlet. Also included is a Duotight adapter which allows the regulator to be easily used with EVABarrier draft tubing. Features: 0 - 60 PSI Strong, robust design Highly accurate precision diaphragm Easily adjusted by hand 1/4" flare fitting with barbed outlet Duotight adapter fitting included for use with EVABarrier draft tubing Heavy duty steel gauges with rubber bumpers 65 psi PRV M6 mounting screw holes Made in accordance with AS 4267  

Read more less

In store pick up only.  Does not ship. Filled 10 pound aluminum CO2 cylinder. Will dispense approximately 18 five gallon kegs before needing to be refilled or exchanged. Dimensions: 20.75" Tall x 7" wide.  These are used cylinders that have been filled from a local vendor.

Read more less

This modular gas manifold will allow you split one CO2 line to multiple ones.  Each line can be turned off individually without affecting the flow to other kegs.  Each ball valve contains a check valve that ensures no beer or gas can flow between the two kegs.  The barbs are all 5/16" which is standard for gas line in the beer industry.   If later, you decide to add an additional keg this manifold can be expanded using the Add On Assembly.

Read more less

The Duotight In-Line regulator works with both gas and liquid. The flow can easily be adjusted with the yellow adjustment knob. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing. Features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The gauge is removable and can be swapped out with a gauge of a different pressure range.Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-60 psi Made with quality EPDM seals Wall mountable

Read more less

Plastic washers that will fit most brands of gas regulators.  Inserts between the Co2 cylinder and regulator.

Read more less

8 gram non-threaded CO2 cartridge, pack of 10. These will work in a uKeg growler. Each cartridge is 2 1/2" long and 11/16" in diameter.

Read more less

Safely control the flow of CO2 with Micro Matic's Premium Plus dual gauge co2 regulator low pressure primary regulator with an in-place check valve in the shutoff preventing liquid from backing up into the regulator. This is useful for homebrewers who use corny kegs as most corny kegs have no check valves on the keg couplers (ball lock fittings). For added safety, this model has an integrated pressure relief valve that vents if pressures exceed 55-65 PSI. This primary regulator comes with an output gauge that monitors pressure up to 60 PSI to provide you options for different beers while the tank gauge has a 0-3000 PSI range so you know how much pressure remains in your cylinder. Premium Plus regulators come standard with a tamper-evident adjustment screw and bonnet, preventing unauthorized adjustment to gas pressure which can cause foaming/performance issues.  Micro Matic is committed to producing the best quality gas equipment in the industry. Made right here in the USA, every regulator that leaves their plant goes through a rigorous quality control testing process ensuring accuracy, reliability, and optimal performance in the market. The Premium Plus regulator offers industry-leading features, providing a better performing, better quality, and better-tested regulator.  CO2 GAS REGULATOR FEATURES  Adjust pressure from 0 to 60 PSI  Built for durability: forged brass body, accurate machining, tin nickel plated  Useful for homebrewers who use corny kegs as most corny kegs have no check valves on the keg couplers (ball lock fittings)  Premium quality metal gauges for durability  One piece heavy duty seat capsule  Constant pressure supply at high output flow rates  Factory leak tested at 2900 PSI  Tamper-evident adjustment screw and bonnet  Durable built-in long-lasting solid nylon inlet seal  Enlarged CO2 port for high volume  Safety relief valve releases at 55-65 PSI  Made in the USA 🦅🇺🇸 For home or commercial use 

Read more less

Replacement o-ring for co2 tank nipple inlet. .424id x .103cs 70duro

Read more less

This modular gas manifold will allow you split one CO2 line to four of them.  Each line can be turned off individually without affecting the flow to other kegs.  Each ball valve contains a check valve that ensures no beer or gas can flow between the two kegs.  The barbs are all 5/16" which is standard for gas line in the beer industry.   If later, you decide to add an additional keg this manifold can be expanded using the Add On Assembly.

Read more less

This modular gas manifold will allow you split one CO2 line to three of them.  Each line can be turned off individually without affecting the flow to other kegs.  Each ball valve contains a check valve that ensures no beer or gas can flow between the two kegs.  The barbs are all 5/16" which is standard for gas line in the beer industry.   If later, you decide to add an additional keg this manifold can be expanded using the Add On Assembly.

Read more less

Replacement pressure gauge 0-60 PSI 1/4" NPT bottom inlet Right hand threads

Read more less

The BlowTie 2 Spunding Valve complete kit is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style spunding valve is much more accurate than the poppet style. The blow off pressure can be easily set using the BlowTie's integrated pressure gauge. The kit includes everything you'll need to use the spunding valve right out of the bag. Kit Includes: BlowTie 2 w/ Integrated Pressure Gauge (0-15 psi) Ball Lock Disconnect Duotight Flare Fitting 8 mm OD Rigid Plastic Joiner

Read more less

Safely control the flow of nitrogen to a single keg with this made in the USA, Micro Matic Premium Plus primary low pressure nitrogen regulator. The primary nitrogen regulator is designed to decrease the gas cylinders high pressure to a lower, usable pressure for: mix gas (CO2 - N) for beer, wine and cold brew dispensing or servicing a gas blender. For added safety, this model has an integrated pressure relief valve that stops the gas flow if pressure gets too high (at 55-65 PSI). This primary regulator comes with an output gauge that monitors pressure up to 60 PSI to provide you options for different beers while the tank gauge has a 0-3000 PSI range so you know how much pressure remains in your cylinder. Premium Plus regulators come standard with a tamper evident adjustment screw and bonnet, preventing unauthorized adjustment to gas pressure which can cause foaming/performance issues. Features Adjust pressure from 0 to 60 PSI Built for durability: forged brass body, accurate machining, chrome plated finish Premium quality metal gauges for durability Factory leak tested at 2900 PSI Tamper evident adjustment screw and bonnet Nickel-plated valve seats for high corrosion resistance Quad-ring inlet seal at tank connection Fixed exchangeable inlet seal Enlarged nitrogen port for high volume Safety relief valve releases at 55-65 PSI Made in USA For home or commercial use Use for mix gas (CO2 - N) for beer, wine and cold brew dispensing or servicing a gas blender NOTE: The primary nitrogen regulator is designed to decrease the gas cylinders high pressure to a lower, usable pressure for: mix gas (CO2 - N) for beer, wine and cold brew dispensing or servicing a gas blender. Specifications: Performance: 1 Pressure / 1 Product Output Pressure Gauage: 0-60 PSI, for accurate product pressure Tank Pressure Gauge: 0-3000 PSI, for accurate remaining tank pressure Outlet Barbs: 3/8" O.D. (To fit 5/16" I.D. Gas Hoses) Pressure Relief Valve: Safety pressure relief valve releases at 55-65 PSI

Read more less

Replacement tank pressure gauge 0-3000psi (200bar) for regulator. 0-3000 PSI 1/4" NPT Right Inlet Left hand threads Back Blowout Safety Feature

Read more less

16gm Co2 Cartridge Not Threaded

Read more less

Shut-off valve, 1/4"NPT x 5/16" hose barb, w/ball check valve

Read more less

Unthreaded 16g CO2 cartridges, pack of 6.

Read more less

Does not ship.  In store pick up only. Filled 2.5 pound aluminum CO2 cylinder. Will dispense approximately 4-5 five gallon kegs before needing to be refilled.         These are used cylinders that have been filled from a local vendor.      

Read more less

Micro Matic is committed to producing the best quality gas equipment in the industry. Made right here in the USA, every regulator that leaves their plant goes through a rigorous quality control testing process ensuring accuracy, reliability and optimal performance in the market. Micro Matic's Premium Plus regulator offers industry leading features, providing a better performing, better quality and better tested regulator. Safely control the flow of CO2 simultaneously to two kegs of beer with this Premium Plus low pressure primary regulator. For added safety, this model has an integrated pressure relief valve that stops the gas flow if pressure gets too high (at 55-65 PSI). This primary regulator comes with an output gauge that monitors pressure up to 60 PSI to provide you options for different beers while the tank gauge has a 0-3000 PSI range so you know how much pressure remains in your cylinder. Premium Plus regulators come standard with a tamper evident adjustment screw and bonnet, preventing unauthorized adjustment to gas pressure which can cause foaming/performance issues. Features Adjust pressure from 0 to 60 PSI Built for durability: forged brass body, accurate machining, tin nickel plated Premium quality metal gauges for durability Constant pressure supply at high output flow rates Factory leak tested at 2900 PSI Tamper evident adjustment screw and bonnet Enlarged CO2 port for high volume Safety relief valve releases at 55-65 PSI Made in USA For home or commercial use Specifications: Performance: 1 Pressure / 2 Product Installation: CO2 tank mount (CGA-320 threads) Output Pressure Gauge: 0-60 PSI, for accurate product pressure Outlet Barbs: 3/8" O.D. (To fit 5/16" I.D. Gas Hoses) Pressure Relief Valve: Safety Pressure Relief Valve Releases at 55-65 PSI Capacity: SCFM 3.5 Max Tank Pressure Gauge: 0-3000 PSI, for accurate remaining tank pressure

Read more less

Use this add on assembly to expand your existing modular gas manifold. Includes a shut off check/ball valve, one tee and a connecting nipple.

Read more less

KegLand has developed the world's most compact mini digital gauge with backlight illumination. This very compact design retains high accuracy while still meeting the desirable small form factor.  This meets the growing need as mini keg systems, mini regulators and other more compact keg dispensing solutions are required. Traditional analogue gauges require a small capillary mechanism where a small pipe expands and unravels under pressure. This in turn drives a mechanical cog to rotate the gauge needle.  This age-old technique works quite well especially in large gauges but as this mechanism is manufactured smaller and smaller a tradeoff between accuracy and size becomes the issue.  With very small gauges such as a 27mm x 27mm Mini Gauge, it's difficult to make them better than 10% accuracy due to the physical constraints of the mechanical components. Compatible With: BlowTie 2 Spunding Valve Duotight In-Line Regulator w/ Gauge Core 360 Mini CO2 Regulator Specifications: Battery Life: More than 2 years (using the mini gauge once a day) Battery Type: CR2032 Auto Battery Saver: automatically turns off after 15 sec Size: 27mm x 27mm (1" x 1") Radial O-ring Stem: 7.8mm Bore Please note: This gauge is not suitable for measuring pressure of liquids.  It is only for measuring gas pressure.  If liquid gets into the pressure transducer it will damage the gauge.

Read more less

Hex plug, 1/4" NPT, 9/16" hex, right hand threads, for secondary regulators

Read more less

Brass shut off valve with check valve. !/4”MFL x 1/4” NPT

Read more less

The KOMOS® gas manifold features 1/4" flare gas inlet and check valves for much more flexibilty when choosing your draft line. Use 1/4" or 5/16" gas line with the appropriate Flare Fitting Set (1/4 Swivel Set or 5/16 Swivel Set), or use EVABarrier Draft Tubing with the appropriately sized Duotight fitting (8mm Flare Fitting or 9.5mm Flare Fitting). The check valves can also be replaced with a Gas Ball Lock Post Bulkhead, allowing for the use of a gas-in ball lock jumper line as a quick connect option. If more than 4 outlets are needed, join multiple manifolds together with this 1/4" Gas Manifold Nipple. Features: 1/4" Flare connections 1/4" BSP ball valves Rated to 100 psi Wall mount holes Made from aluminum, brass, and stainless steel Manifold Overall Length 2-Way: 5.25 inches 3-Way: 7.25 inches 4-way: 9.25 inches  The above measurements are from the tip for the brass flare inlet to the plug on the opposite end. Each manifold measures approximately 3.5" from the mounting holes to the tip of the valve.

Read more less

1/4" MFL gas shut off valve with non-return check valve. Material: Brass/Chrome Thread Size: 1/4" x 1/4"-19 BSPT

Read more less

Nylon CO2 Inlet Seal for Micro Matic Premium Regulators.

Read more less

1/4" brass nipple for expanding a modular gas manifold. Right hand thread.  

Read more less

Send different pressures to two separate kegs from the same CO2 tank with the KOMOS Dual Body Regulator. This industrial gauge regulator aims to be the last regulator you'll ever need. Large dual-body and precision diaphragms provide high flow rates, and pressure settings are quickly and easily dialed in the with hand knobs. The pressure gauges are made from thick stainless steel and come with rubber bumpers for an extra layer of protection. Triple-scale dial faces read in psi, bar, and kPa. Comes with 1/4" flare fitting with barbed outlets. Included Duotight adapters allow the regulator to be easily used with EVABarrier draft tubing. Features: 0–60 PSI operating range Low pressure gauge reads from 0–100 Pull ring PRV rated to blow off at 65 PSI Strong, robust design Highly accurate precision diaphragm Easily adjusted by hand 1/4" flare fitting with barbed outlet Duotight adapter fitting included for use with EVABarrier draft tubing Heavy duty steel gauges with rubber bumpers M6 mounting screw holes Made in accordance with AS 4267 Made in China Warning: This product contains lead and/or lead compounds, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warning.ca.gov  

Read more less

The new Core 360 Mini CO2 Regulator from KegLand represents a huge jump forward in the mini regulator market. After much feedback on how to make mini regulators more compact, sturdy and efficient, the brilliant engineers at KegLand have come up with this mini-beast. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge The heavy-duty chrome-plated solid cast brass body will stand up to years of abuse, and is well-suited to protect the mini pressure gauge. A unique 2-step cartridge installation process results in zero gas loss. First the cartridge is fully threaded into the unit to form a seal before it's opened, then the actuator pin is threaded down to puncture the cartridge and release gas into the regulator. The included bushing adapter is ready to accept 16g 3/8"-24 UNF threaded cartridges, and with an additional adapter (coming soon!) you can switch to 74-gram 5/8"-18 UNF threaded cartridges. The gas outlet can be swapped between a female flare connection for flare ball lock disconnects and a 6.5mm Duotight-compatible barb for use with draft line. The barb is a great option for dispensing commercial kegs. There are also two potential outlets at either the side or the front of the regulator. This makes it easy to orient the regulator depending on whether you're using plastic or stainless steel ball lock disconnects. If you remove the 16g cartridge bushing, you'll find TR21-4 female threads for use with SodaStream gas cylinders. These can be a great option for mobile dispensing— they provide much more gas than a CO2 cartridge and are more easily transported than a full CO2 tank. Includes: KegLand Core 360 Mini Regulator 6.5mm Duotight-compatible hose barb Female Flare Fitting for MFL Disconnects Port end cap 65psi Green PRV SodaStream to 16g thread bushing   Instruction Manual

Read more less

This co2 cartridge is used with larger, more robust mini regulators. One canister will push between 1-4 five gallon Cornelius style homebrew kegs, depending on how it is used and the CO2 consumption required. Please Note: This unit is not compatible with the Torpedo Mini CO2 Regulator due to the gap between the threading and the tip of the cartridge. For those units select this link for the recommended 74 g cartridge. 5/8-18 UNF threading 74 g cartridge Shipping Restricted: This product is only eligible for ground shipment within the contiguous 48 states.   C02 Warning: Warning, this product is a gas that is under pressure. Please make sure that when in use the bottle remains in an upright position. Please use extreme caution when using.  

Read more less

Replacement regulator pressure gauge 0-3000 PSI 1/4" NPT Right hand threads

Read more less

Draft Beer CO2 regulator to nitrogen tank adapter Quickly converts a CO2 regulator into a nitrogen regulator. Converts female CGA-320 threads to make CGA-580 threads. Ideal for occasional use of mixed gas cylinders with nitrogen connection. Material: Brass

Read more less

CO2 inlet nipple with o-ring tank seal, left hand threads

Read more less

Regulator inlet flare fitting for primary regulators. 1/4" NPT (left hand) x 1/4" flare Does not include check valve

Read more less

Co2 gas regulator wye fitting for adding an additional shutoff. Specifications Material: Brass Finish: Chrome Plated Brass Thread Size: 1/4MPT x 1/4 FPT x 1/4 FPT Warnings / Instructions Important information: Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Read more less