Draft Fittings

Don't worry about having a wrench available with a wing style coupling nut.  Just tighten by hand. Specifications Material: Chrome Plated Brass Thread: 7/8"-14 (5/8" BSP) (U.S. Beer Industry Standard)

Read more less

3/8" Hole, 7/16" Barb Shank TailpieceShank Tailpiece for 3/8" ID HoseNickel Plated

Read more less

Beer line 5/16" x 3/8" stainless steel barbed splicer. Splices 1/4" I.D. Vinyl to 5/16" I.D. Vinyl 1/4" I.D. Vinyl to 3/8" I.D. Poly 5/16" I.D. Poly to 3/8" I.D. Poly Specifications Type:  Straight Connectors Material:  304 Stainless Steel I.D.:  1/4"

Read more less

If you use different kegs and couplers on a normal basis, save time by add quick disconnects to your draft systems gas line tubing. Place a quick disconnect fitting in the gas line and no tools are needed to disconnect from the gas source. Simply pull back the sleeve on the female side and the connection separates and the gas is shut off.   Note: To make a complete set please order the Disconnect Tailpiece or Disconnect Nipple with Hose Barb. Specifications: Connection: Female Side Length: 3-1/4" Barb: 3/8" O.D. (to fit 5/16" I.D. Gas Hose) Material: Brass Shut-off: Built in

Read more less

1/4" Hole, 5/16" Barb Shank Tailpiece Shank Tailpiece for 1/4" ID HoseNickel Plated

Read more less

This Duotight check valve is a great idea for protecting your regulator. It has a low opening pressure of 1 psi, and since it cannot be opened or taken apart, it is recommended for gas applications only. The internal components are made from stainless steel. Compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

5/16" X 5/16" hose splicer (for 5/16" ID hose), 303 stainless steel.

Read more less

1/2" Hole, 9/16" Barb Shank TailpieceShank Tailpiece for 1/2" ID HoseNickel Plated

Read more less

Our quick disconnect locks into place with an audible "click," creating a secure, leak—free seal every time. They also allow quick and easy one—handed disconnections by simply pressing the thumb latch. Micro Matic quick disconnect couplings provide a fast, easy and safe way to incorporate a gas shut—off in your draft beer system. FEATURES One handed operation—no tools needed to connect or disconnect Audible "click" asures your connection is secure High flow valve design for maximum flow in a compact coupling Withstand up to 120 PSI Temperature range  -40°F to 180°F (-40°C to 82°C)

Read more less

90 degree barbed swivel elbow stem and nut. Specifications: Barb with fit 3/8" ID tubing. Nut is a 1/4" flare fitting. 304 Stainless Steel.

Read more less

Nylon flare washers for metal-to-metal 1/4" flare fitting connections. 10 Pack

Read more less

Make a really small and useful keg system out of PET plastic bottles. Great for taking beer to a party or making your own micro/portable/mini keg system. PCO 1881 threading on all ends. Tee fitting only. Does not include Carbonation Caps or PET growler.

Read more less

This Duotight ball valve can be used as an inline shut off valve on beverage lines. Compatible with EVABarrier 9.5 mm OD tubing.Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

Stainless steel barbed tee commonly used to splice/split Co2 draft hose. Specifications 304 Stainless Steel 5/16" ID Barbs T Fitting Splices Together 5/16" I.D. Vinyl to 5/16" I.D. Vinyl 5/16" I.D. Vinyl to 3/8" I.D. Poly 3/8" I.D. Poly to 3/8" I.D. Poly

Read more less

Beer line 3/8" x 1/2" stainless steel barbed splicer. Splices 5/16" I.D. Vinyl to 1/2" I.D. Vinyl 1/2" I.D. Vinyl to 3/8" I.D. Poly 3/8" I.D. Poly to 1/2" I.D. Poly Specifications Type:  Straight Connectors Material:  304 Stainless Steel

Read more less

This Duotight fitting with 1/4" male thread is a great option for connecting gas line to regulators and manifolds that have 1/4" FPT. Comes with seated O-ring. Compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

This Duotight joiner fitting is compatible with EVABarrier 8 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

Splice together 3/16" ID and 5/16" ID tubing with this 303 stainless steel hose splicer.

Read more less

This Duotight Bulkhead is the same one used for installing the Temp Twister cooling coil into the lid of the FermZilla. Allows you to add a bulkhead to just about anything that can then be connected to with EVABarrier 9.5 mm OD Tubing or 3/8" OD stainless or copper tubing.  Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

This Duotight elbow fitting is compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

Splice together 3/16" ID and 3/8" ID tubing with this 303 stainless steel hose splicer.

Read more less

Female quick disconnect fitting with a 1/4" barb. Includes a shutoff that seals the valve when not connected to tubing.

Read more less

This 0-40 psi, push-in pressure gauge comes with an 8 mm (5/16 in.) barb and is specifically designed to be compatible with 8 mm Duotight fittings. It's the ideal companion to the BlowTie Diaphragm Spunding Valve, allowing you to dial in your blow off setting for pressure fermentations or pressure transfers. Triple-scaled to read in psi, bar, and kPa.

Read more less

This Duotight tee fitting is compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

This Duotight elbow fitting is compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) 

Read more less

1/2” barbed tee, stainless steel.

Read more less

Stainless steel 1/4" swivel nut and 1/4" barb commonly with 3/16" ID draft tubing and corny keg couplers.  If connecting this to another metal connection, it is recommended to use a nylon flare washer to complete the seal.

Read more less

This Duotight fitting with 1/4" Flare is perfect for flared gas and beverage ball lock and pin lock disconnects.  This Duotight fitting is compatible with EVABarrier 9.5 mm OD Tubing. Although this fitting would also fit a beverage disconnect, 9.5 mm OD EVABarrier is only recommended for beverage line in long draw draft set ups. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Note: Ball lock fitting and regulator not included. 

Read more less

Beer line 5/16" x 1/2" stainless steel barbed splicer. Splices 1/4" I.D. Vinyl to 3/8" I.D. Vinyl 1/4" I.D. Vinyl to 1/2" I.D. Poly 5/16" I.D. Poly to 1/2" I.D. Poly Specifications Type:  Straight Connectors Material:  304 Stainless Steel

Read more less

Beer line 1/4" x 3/8" stainless steel barbed splicer. Splices 3/16" I.D. Vinyl to 5/16" I.D. Vinyl 3/16" I.D. Vinyl to 3/8" I.D. Poly 1/4" I.D. Poly to 3/8" I.D. Poly Specifications Type:  Straight Connectors Material:  304 Stainless Steel I.D.: 3/16"

Read more less

Vinyl beer line 1/2" x 1/2" stainless steel barbed splicer. Splices 1/2" I.D. Vinyl to 1/2" I.D. Vinyl Specifications Type:  Straight Connectors Material:  304 Stainless Steel O.D.: 7/16" I.D.: 1/2"

Read more less

3/16" ID stainless steel tailpiece commonly used for 3/16" ID draft tubing. 316 Stainless Steel  

Read more less

90 degree barbed swivel elbow stem and nut. Specifications: Barb with fit 1/4" ID tubing. Nut is a 1/4" flare fitting. 304 Stainless Steel.

Read more less

This Duotight to Male Elbow fitting can be used to route tubing connecting to 8 mm Duotight Ball Lock QDs. This is a great way to keep tubing organized and out of the way in your kegerator. Compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)  Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.

Read more less

Duotight 6.5 mm (1/4 in.) x 9.5 mm (3/8 in.) Reducer Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) 

Read more less

Male quick disconnect with a 1/4" female barb. Includes a shutoff that seals the valve when not connected to tubing.

Read more less