Draft Fittings
1/2” x 1/2” Vinyl Tubing Splicer - Stainless Steel
Vinyl beer line 1/2" x 1/2" stainless steel barbed splicer. Splices 1/2" I.D. Vinyl to 1/2" I.D. Vinyl Specifications Type: Straight Connectors Material: 304 Stainless Steel O.D.: 7/16" I.D.: 1/2"
$3.99
Duotight 8mm (5/16) x 1/4" BSP Male Bulkhead
This Duotight Bulkhead is the same one used for installing the Thermowell into the lid of the FermZilla. Allows you to add a bulkhead to just about anything that can then be connected to with EVABarrier 8 mm OD Tubing or 5/16" OD stainless or copper tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.
$4.49
6.5 mm (1/4 in.) x 9.5 mm (3/8 in.) Reducer
Duotight 6.5 mm (1/4 in.) x 9.5 mm (3/8 in.) Reducer Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$3.99
Push In Pressure Gauge
This 0-40 psi, push-in pressure gauge comes with an 8 mm (5/16 in.) barb and is specifically designed to be compatible with 8 mm Duotight fittings. It's the ideal companion to the BlowTie Diaphragm Spunding Valve, allowing you to dial in your blow off setting for pressure fermentations or pressure transfers. Triple-scaled to read in psi, bar, and kPa.
$8.99
Grommet for 3/8'' ID SS Tubing
Rubber grommet for chrome plated brass ferrule with 3/8" ID bore.
$0.95
Duotight Push-In Fitting - 8 mm (5/16 in.) Plug
This Duotight plug is used to block up your 8 mm (5/16") tees, elbows or other fittings for gas leak testing or simply to plug an unused section. Features: Insert plug and firmly push to connect Release plug by pushing in the collet on the Duotight fitting Suitable for both gas & beverage applications Made from food-grade acetal plastic Temperature rated to 212°F (100°C)
$1.49
Chrome Plated Brass Ferrule for 3/8'' ID SS Tubing
Brass ferrule for jockey box cooling coil. Chrome plated brass with a 3/8" ID bore.
$3.50
3/8'' x 50' Stainless Draft Coil
3/8" x 50' 304 Stainless Steel Coil This 3/8" draft coil will hold more beer than your typical 5/16" coil meaning it will cool your beer quicker and it will take less CO2 to serve your beer. Using less CO2 will help reduce over carbonating your beer which results in less foam.
$95.00
Duotight 9.5 mm (3/8 in.) x 1/2 in.FPT
This Duotight to 1/2" female thread fitting can be used to connect beverage or gas line to any fitting with 1/2" MPT. Compatible with EVABarrier 9.5 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$2.99
$1.25
3/16” x 3/16” Splicer, 304 S/S
Stainless steel barbed splicer generally used for attaching two pieces of beer draft line. Specifications 304 Stainless Steel OD: 1/4" ID: 1/16" Splices Tubing Sizes 3/16" I.D. Vinyl to 3/16" I.D. Vinyl 3/16" I.D. Vinyl to 1/4" I.D. Poly 1/4" I.D. Poly to 1/4" I.D. Poly
$3.49
1/4" x 1/2” Splicer - Stainless Steel
Beer line 1/4" x 1/2" stainless steel barbed splicer. Splices 3/16" I.D. Vinyl to 3/8" I.D. Vinyl 3/16" I.D. Vinyl to 1/2" I.D. Vinyl 1/4" I.D. Poly to 1/2" I.D. Vinyl Specifications Type: Straight Connectors Material: 304 Stainless Steel
$3.99
45 degree 1/4" Swivel Elbow
45 degree barbed swivel elbow stem and nut. Specifications: Barb with fit 1/4" ID tubing. Nut is a 1/4" flare fitting. 304 Stainless Steel.
$4.49
Tubing Quick Disconnect, 1/4'' barb x Male
Male quick disconnect with a 1/4" female barb. Includes a shutoff that seals the valve when not connected to tubing.
$9.99
SS304 Cooling Coil - 50' x 5/16'' OD
304 Stainless Steel Cooling Coil. Includes grommets, ferrules, and hex nut fittings for easy connection to shanks. Specifications: Material: Stainless Steel 304 Size: 50ft x 5/16" OD (Tube) Diameter: 5.25" (coil) Height: 6.75" (coil)
$99.99
Duotight Push-In Fitting - 9.5 mm (3/8 in.) Plug
This Duotight plug is used to block up your 9.5 mm (3/8") tees, elbows or other fittings for gas leak testing or simply to plug an unused section. Features: Insert plug and firmly push to connect Release plug by pushing in the collet on the Duotight fitting Suitable for both gas & beverage applications Made from food-grade acetal plastic Temperature rated to 212°F (100°C)
$1.59
Duotight - 9.5 mm (3/8 in.) Joiner
This Duotight joiner fitting is compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$2.99
$1.00
Duotight 9.5 mm (3/8 in.) x 1/2 in. BSP
This Duotight fitting with 1/2" male thread is perfect for attaching to the Copper Counterflow Chiller and using with 1/2" female threaded Camlock and QD fittings. Compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$2.99
3/16” x 1/4” Splicer, Stainless
3/16" x 1/4" hose splicer, 303 stainless (for 3/16"ID and 1/4"ID hose).
$2.99
1/2” x 1/2” Splicer - Stainless Steel
Beer line 1/2" x 1/2" stainless steel barbed splicer. Splices 3/8" I.D. Vinyl to 3/8" I.D. Vinyl 3/8" I.D. Vinyl to 1/2" I.D. Poly 1/2" I.D. Poly to 1/2" I.D. Poly Specifications Type: Straight Connectors Material: 304 Stainless Steel O.D.: 1/2" I.D.: 3/8"
$3.49
1/4" Barbed Ball Valve
Plastic ball valve with 1/4" barb fittings on each end.
$9.99 $6.99
Push-in 9.5 mm (3/8 in.) Check Valve
Compatible with EVABarrier 9.5 mm OD tubing. It has a low opening pressure of 1 psi, and since it cannot be opened or taken apart, it is recommended for gas applications only. The internal components are made from stainless steel. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Made from food-grade acetal plastic Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$7.99 $4.99
Duotight Push-In Fitting - 9.5mm (3/8 in.) Female Bulkhead
This Duotight fitting is designed to go through the wall of a tank, housing, or wall, similar to a pass through shank, so you can run EVABarrier tubing from one side to the other. Compatible with EVABarrier 9.5 mm OD tubing. With the lock nuts in place, there is approximately 1" of pass through threading. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.
$3.49
Elbow Tailpiece, 5/16'' Barb, Stainless Steel
Stainless steel elbow tailpiece with 5/16" OD Barb
$5.99
Monotight Push-In Fitting - 6.35 mm (1/4") Female x 6.35 mm (1/4") Male Elbow
The Monotight Elbow Piece is suitable for 6.35 mm (1/4") PE tubing or most lines with a 6.35 mm outer diameter. It is designed for use with stiff PE tubing that is commonly used in water treatment equipment, water filters, reverse osmosis fittings, and other appliances that are directly connected to water lines. These fittings will not fit 8 mm or 9.5 mm OD EVABarrier line Monotight push in fittings have been engineered for maximized performance in both gas and liquid applications. No other push ins on the market have EPDM o-rings. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-ring made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.
$1.99
Co2 Disconnect Tailpiece
If you use different kegs and couplers on a normal basis, save time by add quick disconnects to your draft systems gas line tubing. Place a quick disconnect fitting in the gas line and no tools are needed to disconnect from the gas source. Simply pull back the sleeve on the female side and the connection separates and the gas is shut off. Note: To make a complete set please order the Disconnect Air Coupler. Specifications: Connection: Male Side Length: 1-1/4" Barb: 3/8" O.D. (to fit 5/16" I.D. Gas Hose) Material: Brass (not chrome plated)
$9.99
Grommet for 5/16'' ID SS Tubing
Rubber grommet for chrome plated brass ferrule with 5/16" ID bore.
$1.95
Elbow Tailpiece, 3/8'' Barb, Stainless Steel
Stainless steel elbow tailpiece with 3/8" Barb
$6.95
Duotight 9.5 mm (3/8 in.) x Female Beer Thread
This Duotight to Female Beer Thread fitting is perfect for connecting gas line to keg couplers. Although it could be used with 9.5 mm EVA Barrier as a beverage line, this would only be recommended for long draw systems where the beverage line will be 20-25 ft long. Compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$4.49
Chrome Plated Brass Ferrule for 5/16'' ID SS Tubing
Brass ferrule for jockey box cooling coil. Chrome plated brass with a 5/16" ID bore.
$3.50
Chrome Plated Brass Ferrule for 1/4'' ID SS Tubing
Brass ferrule for jockey box cooling coil. Chrome plated brass with a 1/4" ID bore.
$3.50
$1.25
1/4'' Swivel Nut for 5/16'' Barb
Flare nut, 1/4 (for 5/16b)
$1.00
Duotight 9.5 mm (3/8 in.) x 1/2 in. BSP Ball Valve
This Duotight ball valve with 1/2" male thread is perfect for attaching to the water input on the Copper Counterflow Chiller, allowing you to adjust the water flow while chilling your wort. Compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$4.49
