Draft Supplies
Stepless Oetiker Clamp, 12.3
Stepless Oetiker Clamp, Size 12.3 for 7/16" OD tubing
$0.50
Hose Gear Clamp - Fits 1'' to 1 5/8'' OD Tubing
Stainless steel hose clamp for 1" to 1 5/8" OD tubing.
$2.00
Duotight In-Line Regulator | Built-In Pressure Gauge | 0-150 PSI | Liquid & Gas Compatible | 6.35 mm Duotight
The Duotight In-Line Regulator works with both gas and liquid. Easily adjust the flow can be adjusted with the yellow adjustment knob. 6.35 mm Duotight fittings at both inlet and outlet make this unit perfect for use with 6.35 mm OD tubing. Features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge. The size of the Duotight connection and the extended 0-150 PSI pressure range makes this model perfect for stepping down the pressure of your mains water line for use with water filtration or RO systems. Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 6.35mm (1/4") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-150 psi Made with quality EPDM seals Wall mountable WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge.
$17.29
Economy Series Regulator Repair Kit
Rebuild a Micro Matic Economy Regulator with this 3-piece repair kit. Includes: Pressure Plate 2" Diaphram Seat Capsule Assembly
$14.99
Pressure Gauge, 0-120 PSI
Pressure gauge, 0-120 psi, 1/4" npt bottom inlet, right hand threads.
$13.99
Regulator Outlet fitting - 3/8" barb
Threaded Nipple with 3/8" O.D. Hose Barb (Right Hand Thread) Right Hand 1/4" NPT to 3/8" barb
$5.99
Regulator Outlet fitting - 1/4" barb
Threaded Nipple with 1/4" O.D. Hose Barb (Right Hand Thread) Right Hand 1/4" NPT to 1/4" barb
$2.99
RHT Hex Nipple, 2.5" x 1/4" NPT
This brass hex nipple is 2.5" in length and has 1/4" NPT, right hand threads (rht). It is commonly used for secondary regulators.
$6.99
Gas Shut Off Valve
This shut-off valve is for draft beer gas regulators & gas distributors. Specifications: Right Hand 1/4" NPT (National Pipe Threads) 3/8" O.D. (To fit 5/16" I.D. Gas Hose) Does not include a check valve.
$14.99
6-1/8"' 304 Stainless Steel Shank Assembly
6-1/8" stainless steel shank assembly for dispensing beer, wine, cider, or kombucha. Wall flange is a black plastic material. Specifications: Length: 6-1/8" Bore ID: 1/4" Thread: 7/8"-14 (5/8" BSP) Material: 304 stainless steel shank
$48.60
Star Washer, Dual Shank
Replacement star lock washer for dual shank.
$1.95
CO2 Regulator Inlet Nipple - LHT
Replacement keg beer regulator CO2 Inlet Nipple. Specifications: 1/4" NPT Left Hand Thread (LHT) 2-1/4" Length
$14.99
Low Pressure Back Mount Gauge
A 0-15 lb low pressure, 1/4" thread back mounted pressure gauge commonly used on spunding valves.Please Note: Color/ style of gauge may vary
$13.99
Locking Flange for Wall Shank
Attach this flange to a wall and help prevent your beer shank and faucet from rotating with a set screw. Material: Brass Finish: Brass Thread Size: 5/8”-14BSP
$11.95 $8.99
Draft Tower Shank Assembly for 3'' Tower
Draft tower shank assembly for 3" diameter tower. Specifications: Shank Length: 2.25" Shank Material: Chrome plated brass Bore Size: 3/16" with 1/4" counter bore Barb Size: 1/4" Flange Material: Chrome plated plastic
$13.99
Ball Valve, 1/4" Barb x 1/4" Barb
Chrome plated, lead free brass ball valve - 1/4 turn, 1/4" barb x 1/4" barb (no check valve).
$13.95 $6.99
3'' x 5/16'' Bore Cooler Wall Coupling Assembly, Chrome Plated
3” shank for jockey box. Material: Brass Finish: Chrome Plated Brass Length: 3" Bore ID: 5/16" Thread Size: 5/8" - 14 BSP Important information: Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
$14.99
1/4'' NPT Plug
1/4" NPT plug, left hand threads, Allen socket head, for primary regulators
$1.75
1.6'' Diaphragm Regulator Repair Kit
This kit contains everything you need to service your 3700 series TapRite regulator after years of use. It includes a 1.6" diaphragm, capsule, and tank nipple o-ring which are the most common wear and leak points.
$19.99
Replacement PRV (65 psi)
Replacement pressure relief valve rated to blow at 65 psi. This is a direct replacement of the PRV featured on the KOMOS® CO2 regulator. The Green PRV can also be used with pressurizable FermZilla models for hydro testing. Note that under normal operation, the FermZilla should always be used with the Red PRV (35psi).
$6.49
Poppet Valve, Ball (Wood/Old-Fire)
Fits John Wood and old style Firestone Challenger ball lock tank (has plastic insert under tank plug).
$4.50
European Sanke Keg Coupler - S Style
Keg coupler (tavern head) for S-system (Euro-Sanke, Heineken) kegs. Includes integrated washer/check valve and nut on the gas in side. Nut, nipple, and washer assembly included for both gas and beer inlet/outlet. Nickel coated body with stainless steel probe. This item does not come with a pressure relief valve.
$45.99
5/8-18 x 1/4MPT Liquid Adapter
Adapts Firestone Tank Liquid Plug to 1/4" male pipe thread
$9.95 $6.50
3-Way Beer Manifold
Material: Stainless Steel 304 Mounting Bracket: Integrated Inlet Connection: 1/2" O.D. Barb Outlet Connection: 7/8" - 14 (5/8" BSP)
$69.95 $39.99
NukaTap Mini Beer Faucet | Duotight Adapter | 8 mm (5/16")
This Duotight 8 mm (5/16") adapter is designed to suit the Nukatap Mini and will allow you to couple the faucet to a wide range of other 8 mm Duotight fittings. This includes attaching it to the Duotight Flow Control Ball Lock Disconnect. This particular type of flow control ball lock disconnect includes a "tang" at the top of the push in fitting that couples with this adapter. The combination of the two fittings prevents the faucet from spinning around while in use.
$6.99
Brass Faucet Lever
Brass faucet lever replacement for most standard U.S. draft faucets.
$2.99
Poppet Spring CMB Disconnects
Replacement poppet spring for all CMB ball lock disconnects.
$0.99
Growler Filler - Older Perlick/Perl Faucets Models
304 stainless steel faucet insert with 12 inches of 5/16" ID draft tubing. This insert fits into older styles of Perlick and Perl faucets.
$9.99
Check Valve with Insert
Non-return check valve with insert. Commonly used in U and G system couplers.
$3.49
Sanke Pump Adapter
For use on Sanke pumps. Material: Brass Finish: Chrome Plated Brass Thread Size: 5/8 BSP
$4.95 $3.99
Pump Connector with 3/8'' Hose Barb
Connects any picnic pump to CO2 inlet side of coupler. Material: Brass Finish: Chrome Plated Brass Barb: 3/8" Length: 5/16"
$4.95 $3.99
Intertap Flow Control Seal Kit
Replacement O-rings for Intertap Flow Control faucets.
$5.00
Faucet Lock, Wrap Around, Krome
Made from chrome plated brass, this lock is easy to remove and install on your faucet. It features a hardened steel locking hasp and lock that are keyed alike, a brass tumbler, and two keys.
$34.95
Faucet Bonnet, Chrome
Faucet bonnet, chrome plated brass.
$1.95
Beer Faucet Tap Ferrule - Gold
Use with a hanger bolt to attach to a wooden tap handle. This ferrule has 5/16” top threads and 3/8” bottom threads.
$4.50
Gas Ball Lock, SS Barbed
304 Stainless steel ball lock gas (in) connector with 1/4" barb connection.
$21.99