Stainless Steel Fittings
1/2 in mpt x 3/8 in (1/4" ID) Barb - Stainless
1/2" MPT (male pipe thread) x 3/8" OD (1/4" ID) barb for 3/8" tubing. 304 Stainless Steel.
$5.99
Weldless Stainless Spigot
This 304 stainless steel weldless ball valve assembly is a great option to adding a spigot to your kettle or mash tun. This assembly features a 1/2" female pipe thread on the inside that allows you to add a barb or threaded stainless screen to the inside of your kettle or mash tun. this weldless kit includes a 1/2" Full Port ball valve and a 1/2" barb. All fittings are made from 304 type stainless steel for a lifetime of corrosion free use. Full installation directions included.You will need to drill a 1" hole in your kettle or mash tun for installation of this weldless spigot. It is recommend to use a step drill bit for this.
$38.50
1/2 in mpt x 5/8 in (1/2" ID) Barb - Stainless
1/2" MPT (male pipe thread) x 5/8" OD barb (1/2" ID) for 1/2" ID tubing. This fitting gets improved flow when using with pumps due to the larger 1/2" inner diameter. The 5/8" outer diameter of the barb creates a snug fit for your silicone tubing to stay put. 304 Stainless Steel
$7.20
Stainless Ball Valve - 1/2 in Full Port
304 stainless steel, 1/2" full port ball valve. Specifications: 304 Stainless Steel 1/2" FPT No locking clip 1000 psi rating
$18.95
Weldless Bulkhead 1/2'' FPT x 1/2'' FPT, Stainless Steel
Stainless steel weldless bulkhead. 1/2" FPT (female pipe thread) x 1/2" FPT (female pipe thread)
$16.99
Camlock Type F
Type F camlock disconnect fitting. Male camlock with 1/2" Male Pipe Thread (MPT). 304 Stainless steel construction. 150 psi working pressure.
$8.80
$4.95
Quick Connect Fitting - MQC x MNPT
Out of all the ways to attach silicone tubing to your brew kettle we like quick connect ball lock fittings the most. The ease of connecting/disconnecting and cleaning is unmatched by standard hose barbs, cam locks or tri-clamps. These fittings can easily be attached using one hand even with heavy brewing gloves. The inside diameter of our QC fitting is 1/2". This creates a full port design and will not restrict flow going through the barb. Specifications: 304SS 1/2NPT x QC 1/2" ID
$9.99
1/2 in. mpt x 5/8 in. (3/8" ID) Barb - Stainless
1/2" MPT (male pipe thread) x 5/8" OD barb (3/8" ID) for 1/2" ID tubing. 304 Stainless Steel
$6.75
Quick Connect Fitting - FQC x Barb
Out of all the ways to attach silicone tubing to your brew kettle we like quick connect ball lock fittings the most. The ease of connecting/disconnecting and cleaning is unmatched by standard hose barbs, cam locks or tri-clamps. These fittings can easily be attached using one hand even with heavy brewing gloves. The over sized barb (5/8" OD) is specially designed for our 1/2" silicone tubing. The larger size does two things: It stretches the tubing over the barb creating a tight fit requiring no hose clamps. The inside diameter of our barb is 1/2" compared to standard 1/2" barbs which have a smaller 3/8" size. This creates a full port design and will not restrict flow going through the barb. Specificatioins: 304SS 5/8" barb x QC 1/2" ID
$17.00
12'' Stainless Steel Kettle Tube Screen
Helps filter debris when transferring wort from your kettle to your fermenter.
$9.00
Female Stainless Steel Quick Disconnect w/ Barb
Female Stainless Steel Quick Disconnect with 1/2" Barb This quick disconnect seals up very well without a lot of work in connecting them. It features a 1/2" Barb on the end for easy connectivity to any 1/2" tubing you may have.The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60 psi or less. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off. Note: This product will NOT work with Brass or Plastic Quick Disconnects. Made from 304 stainless steel.
$19.00
1/4" FPT x 1/2" MPT Bushing
1/4" FPT x 1/2" MPT Bushing 304 Stainless Steel
$7.99
Quick Connect Fitting - MQC x FNPT
Out of all the ways to attach silicone tubing to your brew kettle we like quick connect ball lock fittings the most. The ease of connecting/disconnecting and cleaning is unmatched by standard hose barbs, cam locks or tri-clamps. These fittings can easily be attached using one hand even with heavy brewing gloves. The inside diameter of our QC fitting is 1/2". This creates a full port design and will not restrict flow going through the barb. Specifications: 304SS 1/2NPT x QC 1/2" ID
$9.99
Stainless Steel Street Elbow 1/2''
Stainless Steel Street Elbow for building brewing systems.
$5.50
Lock Nut with Groove - Stainless Steel
This standard stainless steel locknut features a groove on one side that can hold a silicone O-ring in place for a superior seal.
$3.99
Female Stainless Steel Quick Disconnect w/ 1/2'' FPT
Female Stainless Steel Quick Disconnect with 1/2'' Female Pipe Thread When used in conjunction with the male quick disconnect, these quick disconnects seal up completely regardless of the liquids direction of flow, while remaining simple and easy to use. It features a 1/2" Female National Pipe Thread on the end for easy connectivity to almost anything. The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60 psi or less. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off. Note: This product will NOT work with Brass or Plastic Quick Disconnects.
$16.99
Hexagon Cap 1/2'' FPT, Stainless Steel
1/2" fpt (female pipe thread) hexagon cap. 304 stainless steel.
$4.49
BrewZilla Flexible Recirculation Arm
This simple upgrade for the BrewZilla is perfect for positioning your recirculating wort or sparge water over the grain bed and makes it even easier to use the unit's built-in pump for transferring wort to your fermenter or for CIP at the end of the brew day. Pairs perfectly with the Sergeant Sparge Head for mashing and sparging, as well as the BrewZilla Spinning Spray Rotor to clean your kettle. Please note: Pictured Camlocks sold separately. You will need a Type F camlock fitting in order to attach the Flexi Arm to your BrewZilla recirculation piping. Specifications: 304 Stainless Steel Fitted Female 1/2" Hex Nuts Ends Silicone Washers Included Length 31.5" KegLand Part Number: KL15097
$11.00
Three Piece Stainless Ball Valve 1/2''
This 304 stainless steel three piece ball valve can be easily taken apart for cleaning. Both inlet and outlet are 1/2" female pipe.
$24.95
Male Stainless Steel Quick Disconnect w/ 1/2'' Barb
Male Stainless Steel Quick Disconnect with 1/2'' BarbThis quick disconnect seals up very well without a lot of work in connecting them. It features a 1/2" Barb on the end for easy connectivity to any 1/2" tubing you may have.The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60 psi or less. Open port, does not have shut-off. Note: This product will NOT work with Brass or Plastic Quick Disconnects. Made from 304 stainless steel.
$13.50
Hex Nipple, 1/2'' x 1-3/4'' Threaded, Stainless Steel
1/2" MPT x 1-3/4" Threaded Hex Nipple Stainless Steel
$6.50
Full Coupler - 1/2 in - Stainless Steel
This 1/2" stainless steel full coupler is corrosion and rust-resistant, making it a reliable, long-lasting solution for your plumbing needs. Perfect for attaching two pieces of pipe in a leak-proof connection.
$4.99
Female Stainless Steel Quick Disconnect w/ MPT
Female Stainless Steel Quick Disconnect with 1/2" Male Pipe Thread When used with the male quick disconnect, these quick disconnect seal up very well in either flow direction, without a lot of work in connecting them. It features a 1/2" Male National Pipe Thread on the end for easy connectivity to almost anything.The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60 psi or less. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off. Please Note: This product will NOT work with Brass or Plastic Quick Disconnects.
$14.99
Camlock Type C
Type C camlock disconnect fitting. Female camlock with 1/2" Barb (13mm). 304 Stainless steel construction. 150 psi working pressure.
$14.50
Bushing, 1/2''FPT x 3/4''MPT, S/S
3/4" MPT x 1/2" FPT Bushing304 Stainless SteelÂ
$3.95
Stainless Steel Ball Valve - 3 Piece
Spike Brewing's 1/2” stainless steel ball valve screws directly into our brew kettles, no need for an additional nipple to make the connection like competitors valves. This valve is dual sided with a male (which screws directly into your kettle) and a female end (which allows for a 1/2" barb or other 1/2" fitting). The 3 piece valve completely disassembles so a thorough cleaning is easy. Specifications: Made from 304 stainless steel 1/2" NPT male end screws directly into the kettle Full port 5/8” inner diameter
$30.00
1/4" Flare Fitting Tee
Stainless steel tee with 1/4" flare thread on all three ends.
$15.00
Stainless Nipple - 1/2 in x 2 in Threaded
1/2" MPT(male pipe thread) x 2" length stainless steel nipple. 304 stainless steel.
$4.99
Camlock Type B
Type B camlock disconnect fitting. Female camlock with 1/2" Male Pipe Thread (MPT). 304 Stainless steel construction. 150 psi working pressure.
$15.50
Camlock Type A
Type A camlock disconnect fitting. Male camlock with 1/2" Female Pipe Thread (FPT). 304 Stainless steel construction. 150 psi working pressure.
$9.90
BrewZilla | DigiBoil | Adjustable Lid Clamps | Stainless Steel | Set of 4
Get the exact tension you need with your BrewZilla or DigiBoil with KegLand's Stainless Steel Adjustable Clamp Set. Permanently replace the standard lid clamps and adjust the tension to your needs. These clamps are only intended for use with the metal Distillation Lid or Boiler Extension Kits. If you are having trouble getting the correct tension to form a good seal with those accessories, these adjustable clamps can help you dial in the fit. They should never be used with the standard glass lid. Compatible with 35L and 65L BrewZillas (Gen 3 / Gen 4), DigiBoils (Gen 1 / Gen 2), and Boiler Extensions. Installation Instructions: You will need a pair of bolt cutters or tin snips to cut the standard clamp off. (Please see product photos for optimum cut location). Remove the nut and bolt and thread it through the clamp. Ensure that the grooved part is facing outwards (photo for reference). If you do not have the grooved part facing outwards, the clamp will be blocked by the round lip of the boiler. Loosen the bolts and spin the clamp up or down to adjust the tension. Use the nuts to lock the desired tension. It is always best to start looser than you think, then adjust tighter. Warning: Do not use the adjustable clamps with a glass lid, the clamps are only designed for distillation lids or other metal accessories.
$13.50
Stainless Tri-Clamp Weldless Bulkhead - 2 in.
Add a 2" tri-clamp port to any tank or lid with this 304 stainless steel weldless bulkhead. Just drill a 45-47 mm hole and tighten this item to your vessel wall. For distilling purposes, this is perfect if you want to fit an extension tube between the BrewZilla / DigiBoil distillation lid and the copper pot or reflux still.
$29.99
Washer - Stainless Steel
This stainless steel washer is specially sized to fit over male NPT fittings. Inner diameter: 0.82" Outer diameter: 1.25" Thickness: ~0.0625"
$1.00
1/2'' x 1'' SS Nipple, Threaded Close
Stainless steel 1/2" x 1" close nipple. Used for connecting a 1/2" ball valve to a union.
$5.00
3/8" Full Port Stainless Ball Valve
304 stainless steel full port ball valve with 3/8" female pipe thread (FPT) on both ends. Note: Handle may be blue instead of the pictured yellow.
$16.50
