Hardware & Fittings
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) - 1.5 in. x 5 in.
304-type stainless steel tri-clamp extension tube with 1.5" clamp ends. 5" long. This is the same length as a Tee. It is used to swap instruumentation in and out of an established system.
$22.99
Stainless Tri-Clamp Weldless Bulkhead - 2 in.
Add a 2" tri-clamp port to any tank or lid with this 304 stainless steel weldless bulkhead. Just drill a 45-47 mm hole and tighten this item to your vessel wall. For distilling purposes, this is perfect if you want to fit an extension tube between the BrewZilla / DigiBoil distillation lid and the copper pot or reflux still.
$29.99
Washer - Stainless Steel
This stainless steel washer is specially sized to fit over male NPT fittings. Inner diameter: 0.82" Outer diameter: 1.25" Thickness: ~0.0625"
$1.00
SS 45 Degree Elbow
1/2" FPT(female pipe thread) stainless steel 45 degree elbow.
$4.65
$5.75
1.5'' Tri-Clamp Tee
1.5" Tri-Clamp Tee 304 Stainless Steel
$29.95
ForgeFit - 1.5" EPDM TC Gasket - Blue
EPDM gasket for 1.5" tri-clamp connection with a temperature range of -30°F to 300°F. Use color-coded gaskets for different applications to avoid cross contamination.
$2.00
3'' Tri-Clamp Gasket with Mesh Screen
Teflon gasket with 304 stainless mesh screen for 3" tri-clamp connections. Can be used as a filter screen to trap large particulates passing through T.C. fittings. Often used for distillation to retain activated carbon for filtering neutral spirits or used in pot distillation to retain botanicals in the vapor stream. The screen has a mesh size of 7 which will block particles larger than 2.83mm or 2830 microns. This slightly larger mesh size makes this screen ideal for use in a distillation basket. KegLand Part Number: KL28868
$9.99
Hose Stem, 5/16'' Barb, 1/4'' fpt
Brass hose stem. 5/16" barb 1/4" female pipe thread (fpt)
$2.99 $1.99
Male Garden Hose Fitting with 3/8" Barb
Brass, male garden hose fitting with 3/8" barb for tubing.
$4.99
Silicone Gasket, 1/2'' TRI-CLVR
Tri clover compatible 1/2" silicone gasket.
$1.50 $1.00
1/4" MFL x 1/2" MPT Half Union
1/4" MFL x 1/2" MPT Half Union 304 Stainless Steel
$13.99
1/2" MPT x 1/2" Barb, 90° Adapter
Stainless steel 90 degree adapter from 1/2" male pipe thread to 1/2" barb.
$14.99
Gas Post x 1/4" NPT
Since most brewers who keg use ball lock connections for hooking up their CO2 tank we figured why not design a ball lock fitting to easily add CO2 to your conical! The Spike Brewing gas post assembly has a standard ball lock gas post on one end with a 1/4" NPT on the other. This allows it to screw directly into Spike Brewing carb stone as well as the their gas manifold. Specifications: Stainless steel Ball lock x 1/4" NPT Comes with replacement o-ring
$11.00
15 psi Pressure Relief Valve
When pressurizing your Spike Conical you'll always want to use a pressure relief valve (PRV). This will prevent the tank from being over pressurized and causing a potential failure to occur. This Spike Brewing PRV was developed with their OEM specifically to work with their CF series Conical. It will keep your tank below the 15psi max working pressure rating. The PRV also has a handy bleeder pull ring to release built up pressure. Specifications: 15 psi release 1/4" npt threads Spike Brewing's specially designed gas manifold is also now available.
$25.00
Camlock Type E
Type E camlock Disconnect fitting. Male camlock with 1/2" Barb (13mm). 304 Stainless steel construction. 150 psi working pressure.
$7.99
QuickConnector™ 1/2'' Barb x 1/2'' FPT
Blichmann Engineering's 1/2" Straight Barb QuickConnector™ Specifications: 1/2" Barb x 1/2" fpt 100% stainless throughout Cool touch silicone grips Retained silicone o-ring Easy to clean and sanitize
$13.99 $11.99
1/2'' Female Flare Thread x 1/2'' Barb, Stainless Steel
1/2" female flare thread x 1/2" barb, stainless steel
$4.25 $2.99
1/2'' mpt x 1/2'' Compression, Stainless Steel
1/2" malt pipe thread (mpt) x 1/2" compression fitting. Stainless Steel
$19.99
1/2 in. mpt X 3/8 in. Barb Elbow, Stainless
This 1/2 in. mpt X 3/8 in. Barb Elbow is made from corrosion-resistant 304 Stainless steel.
$6.50
1/2 in MPT Hollow Plug - Stainless
1/2" MPT stainless steel hollow plug.
$5.25
ForgeFit® Stainless Tri-Clamp End Cap Reducer - 4 in. x 1.5 in.
Connect a 4" TC fitting to a 1.5" TC fitting with this reducer. Made from 304 stainless steel.
$37.99
ForgeFit® Stainless Tri-Clamp Quick Disconnect (QD) - 1.5 in. T.C. x Female QD
1.5" tri-clamp with female quick disconnect. 304 stainless steel.
$13.99
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) - 1.5 in. x 24 in.
304-type stainless steel tri-clamp extension tube with 1.5" clamp ends. 24" long.
$39.99
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) - 1.5 in. x 12 in.
304-type stainless steel tri-clamp extension tube with 1.5" clamp ends. 12" long.
$26.99
2'' Tri-Clamp Tee
304-Polished Stainless tee with 2" tri-clamp connections.
$36.99
3/8" FPT x 1/2" MPT Bushing
3/8" FPT x 1/2" MPT Bushing 304 Stainless Steel
$8.49
1.5" TC Thermowell, 7"
Stainless steel tri-clamp (TC) thermowell. 1.5" TC Connection 7" Length
$29.95
Spike+ Pickup Tube - Side
The Spike+ side pickup is specially designed to work with Spike Brewing's Spike+ line of kettles. The dual 1.5" TC flange allows the pickup tube to attach to the kettle and have a valve or other 1.5" TC accessory attached to the outside. They use 5/8" tubing which flows up to 4x better than their competitors 1/2" size. Recommend Uses: Boil Kettle - Create a whirlpool inside your kettle so hop material collects in the center of the lower stepped section. The side pickup will drain clear wort from the side, above the stepped bottom, avoiding the hop and trub material which has settled. Custom Kettles - Works as a top re-circulation arm or a whirlpool arm. Features: One size fits all Spike+ kettles Oversized 5/8" diameter 304 stainless tube Sized to pick up from above the stepped bottom to avoid hop/trub pickup Rotatable from the outside when installed Made in the USA **A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares**
$34.00
Spike+ Pickup Tube - Shorty
The Spike+ shorty pickup is specially designed to work with Spike Brewing's Spike+ line of kettles. The dual 1.5" TC flange allows the pickup tube to attach to the kettle and have a valve or other 1.5" TC accessory attached to the outside. They use 5/8" tubing which flows up to 4x better than their competitors 1/2" size. Features: One size fits all Spike+ kettles Oversized 5/8" diameter 304 stainless tube Sits on the bottom of the kettle for very low volume losses Made in the USA **A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares**
$34.00
QuickConnector™ 3/8'' Barb x 1/2'' FPT
Blichmann Engineering's QuickConnector™ Stainless Swivel Fitting Specifications: 1/2" fpt x 3/8" straight barb Cool touch silicone grips Retained silicone o-ring Easily cleaned
$16.00 $12.99
QuickConnector™ 1/4" mfl x 1/2'' FPT
Blichmann Engineering's 1/4" mfl QuickConnector™ Specifications: 1/4" mfl x 1/2" fpt 100% stainless throughout Cool touch silicone grips Retained silicone o-ring Easy to clean and sanitize
$13.99 $11.99
Kettle Thermometer Coupling
SS Brewtech Kettle Thermometer Bulkhead 304 stainless steel For use with a dial thermometer 1/2" FPT Fits into 13/16" punch hole Hi-Temp silicone o-rings
$11.95
2" TC Butterfly Valve
Spike Brewing conicals come equipped with this 100% sanitary 2” TC butterfly valve. This valve has a squeeze locking/trigger handle that allows for 180 degrees of motion and 13 locking positions.The butterfly valve is the preferred valve for the cold side of brewing instead of ball valves. These butterfly valves have no pockets or crevices for bacteria to hide in. Ball valves can trap liquid between the seals in the internal ball when opening and closing the valve.The handle is a special 'shorty' style which keeps a compact design. This handle is made from extremely durable glass reinforced Nylon which is much lighter than metal handles. Specifications: 2" TC 304SS metal components FDA silicone seals Light and very durable Nylon handle Squeeze trigger with 13 locking positions
$75.00
Carb Stone
If you didn't already know the Spike Conical is a unitank! This means it is designed to handle pressures up to 15psi. This capability allows you to add 15psi of pressure needed to carbonate your beer before transferring to your keg. This will reduce carbonation times from upwards of a week down to less than 24hrs. Spike Brewing's carb stone is designed to attach to the outside of the racking port butterfly valve. This means the carb stone can be installed when you need it and won't be sitting inside the tank during the entire fermentation process. This eliminates the chance for the stone to become clogged. It also has a protective stainless housing which prevents damaging the very brittle 'stone'. Detailed product guide:Product Guide.pdf Forced carbonation pressure chart:Carbonation Chart Carb Stone Only Carb Stone 1.5" TC Clamp 1.5" TC Gasket Gas Post Carb Stone Bundle Carb Stone Package (see above) Pressure Gauge (Link) PRV (Link) 2nd Gas Post (Link) Gas Manifold (Link) **Always use a 15psi pressure relief valve when pressurizing a tank**
$85.00 - $160.00
4'' Tri-Clamp Gasket with Mesh Screen
Teflon gasket with 304 stainless mesh screen for 4" tri-clamp connections. Can be used as a filter screen to trap large particulates passing through T.C. fittings. Often used for distillation to retain activated carbon for filtering neutral spirits or used in pot distillation to retain botanicals in the vapor stream. The screen has a mesh size of 7 which will block particles larger than 2.83mm or 2830 microns. This slightly larger mesh size makes this screen ideal for use in a distillation basket. KegLand Part Number: KL28394
$10.99
