Draft Supplies

This Duotight check valve is a great idea for protecting your regulator. It has a low opening pressure of 1 psi, and since it cannot be opened or taken apart, it is recommended for gas applications only. The internal components are made from stainless steel. Compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

Replacement corny keg post where the gas-in ball lock coupler is fitted onto.  Includes one o-ring and an universal poppet. 19/32" - 18 pitch thread Fits Cornelius Spartan, Super Champion, and Torpedo kegs.  Use a 11/16" deep socket to install

Read more less

The NUKATAP Stealth Bomber beer faucet features a forward sealing design. In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transferring to your beer while you pour. Similar to the Intertap line of faucets, but with improved laminar flow and reduced first pour foam due to its lower thermal mass. The NUKATAP is compatible with all Intertap spout accessories. Made from stainless steel Shuttle made from TPV O-rings made from EPDM Matte black finish

Read more less

Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines.  16.5mm for 5/8" OD Tubing.  (14-16mm OD) This will fit our 5/16" ID clear/red draft tubing that is commonly used for gas/co2 line. Stepless Clamp Tool sold separately.

Read more less

New dual rubber handle ball lock stainless steel keg. Features: 2.5 gallons Rated to 130 PSI Dry hop tab under keg lid 304 stainless steel Imported from China 14.5" h x 8.375" diameter

Read more less

For A.E.B. & Cornelius ball lock tanks

Read more less

Replacement corny keg post where the liquid-out ball lock coupler is fitted onto.  Includes one o-ring and an universal poppet. 19/32" - 18 pitch thread Fits Cornelius Spartan, Super Champion, and Torpedo kegs.  Use a 11/16" deep socket to install

Read more less

Chrome plated Brass splicer tee has a 5/16″ bore. So use with 5/16 in. ID inlet and outlet hoses. Barbed Hose splicer Tee for gas in beer dispensing Brass with chrome plating. Tee fittings turn it to a 3-way system. Use with 5/16″ ID hoses.

Read more less

Replacement o-rings for ball lock or pin lock keg posts (body connects). 10 Pack

Read more less

The patented,Torpedo Kegs are a new lineup of Stainless Steel Ball Lock kegs.  We've taken the features and solid construction of classic ball lock kegs (High Quality welds, pressure reliefs, ball lock fittings & Corny lid) and added a couple more. Laser welded 304 SS construction and rolled Stainless Handles guarantee years of trouble free use.  These are stackable kegs, any size stacks on any other size.  This means you'll be able to save space in the garage or kegerator, since they can be stacked w/ ball lock fittings attached and serving. Features: 304 SS Construction High Quality Laser Welded Seams ISO9001 Quality Assurance 130 PSI Max Pressure PRV Rating: 85 psi Rolled SS handles make transport easy Stackable kegs - storage or serving Kegs come Boxed individually Kegs are marked with size, material, max pressure, ISO9001, In & out for fittings, & A Max Pressure warning.

Read more less

Standard clamp crimper for stepless style clamps with anti-slip rubberized grip. Material: Fully Hardened Steel 9" in length

Read more less

This washer seals the sliding shaft inside your faucet, helping to prevent drips.

Read more less

This stainless steel ball lock cap features soda bottle threads, allowing you to convert a soda bottle into a pressurized growler. It is compatible with both gas and liquid ball lock disconnects. Also works well for cleaning draft lines. Simply add line cleaning solution to a soda bottle, attach it to the draft line, and open the faucet to push solution through. This is a direct replacement to ball lock fittings included with the FermZilla pressure kit. It can also be attached to the FermZilla collection container, enabling you to purge the collection container of oxygen. 28mm PCO 1881 Threads

Read more less

Faucet ball washer

Read more less

Kit includes the NukaTap Mini, Flow Control Ball Lock QD, Duotight Adapter, and Self Closing Spring Mini Design – Ideal Flow Rate for Small SystemsMost conventional beer faucets are designed with 3/8" diameter spouts so you can pour a pint in just over 10 seconds. This type of flow rate is great for high turnover bars and commercial venues but isn't necessary or even desirable for all applications. For compact portable systems and home draft systems, a slower flow rate is easier to control and further reduces foaming issues due to the low liquid volume stored in the body of the faucet. The NukaTap Mini is also more ideal for pouring smaller doses. For example, cocktails where 5-8 oz of liquid is dispensed is difficult to control with a high flow rate tap. For portable systems, the NukaTap Mini with the Flow Control Ball Lock QD & Duotight Adapter assembly is small enough to literally put in your pocket, making it ideal for mini keg setups that you want to be portable or that you want to easily fit inside a domestic fridge where space is tight. Forward SealingForward sealing faucets are absolutely the way to go when it comes to beer taps. Old legacy taps still exist in the industry that are simply poorly designed. The issue with rear sealing faucets is that beer dries up on the internal piston. Aside from being unsanitary, as more and more beer dries up in these components the faucet can almost glue completely shut causing damaged seals or broken handles (this is particularly the case if it's left for some time to dry out with beer inside). These older legacy designs still exist probably due to poor education. The forward sealing designs do not have this problem and the tap drains out completely with no beer drying up on the mechanical moving parts in the same way. This makes the tap more sanitary and reduces maintenance. In many instances the price is similar so there is no reason to use a poorly designed rear sealing faucet. All NukaTap faucets are forward sealing. Laminar FlowJust like the NukaTap SS and NukaTap FC, the NukaTap Mini has been designed with laminar flow in mind. Laminar flow is critical for a beer tap as it means you will pour the beer with minimal foaming and a substantial reduction in wastage. Think about how many times a beer faucet opens and closes in its lifetime. 1,000 or maybe 10,000 times?  Laminar flow saves wasted beer in excessive foam and the better laminar flow easily pays for itself in a reduction in lost beer. To use poorer designed faucets is essentially flushing money down the sink. Extensive modeling has been done on the NukaTap design to improve laminar flow. Integrated Seals That Are Indestructible and More SanitaryUnlike other designs, the NukaTap Mini body is made from Polyketone (POK) making it strong, robust, and able to be autoclaved. The seals are also over-molded from Santoprene® making them hard wearing so they will literally last for the lifetime of the tap without the need for replacement. Santoprene® and POK both have excellent resistance to chemicals such as caustic soda, peroxide, phosphoric acid, lactic acid, citric acid, acetic acid, and all common chemicals sold and used in the beverage industry. The seals internally are over-molded meaning no fissures or cracks exist for bacteria, crud, or yeast to hide. Superior First Pour Foam Due to Low Thermal Mass and ConductivityFirst pour foam is an issue caused by a warm tap body. For most faucets to pour well it's important to dispense enough beer to cool the tap body down to reach maximum performance. In addition to this the conductivity of the tab body also makes this worse so insulative materials simply work better than conductive materials. The NukaTap mini not only has very low thermal mass but is also highly insulative being made mostly from Santoprene® and POK. The combination of these two factors in conjunction with superior laminar flow makes for the lowest "first pour foam" effect out of any tap ever produced. Long Shank AlternativeMost conventional beer faucets require a large 3/4" hole to be drilled through the side of your refrigerator, keezer, or cold box wall. Traditional long shanks also generally have a large volume of liquid that sits inside the wall unrefrigerated which is not ideal. New long shank alternatives developed for the NukaTap Mini are designed to suit any wall thickness and greatly reduces the stagnant beer sitting in the shank itself. For walls up to 2.7" thick, these wall mount shank kits include three screws, however if the wall is thicker, you can also use 6 small wood screws or something similar and attach three screws from the front and 3 from the back allowing you to go into any wall type. Another advantage of this new design is the tap will never accidentally rotate. Typically, other long shank beer taps rely on the hex nut on the shank to be done up tight enough to prevent rotation but if the wall compresses (often the case with foam walls) the tap is allowed to rotate. This new design has three fixing points making it impossible for the tap to rotate accidentally as the interlocking teeth behind the collet allow you to set the angle and then do up the collet to fix the tap permanently in that position.

Read more less

Molded probe seal washer for D style sankey couplers.

Read more less

Limited supply in-store available for pickup. Drop ships from vendor.   The KOMOS V2 Kegerator improves upon the already striking feature set of the original best-selling model -- now made with upgraded refrigeration components for higher efficiency and faster cooling, and a redesigned interior that can hold up to FOUR 5-gallon Ball Lock corny kegs at one time.  Assembly is quick and easy thanks to push-to-connect Duotight fittings and EVABarrier draft tubing. High-quality, stainless steel Intertap, forward sealing faucet(s) and stainless steel tower come standard. It also features a digital controller, stainless steel door, stainless steel floor, rolling casters, tower cooling fan, robust KOMOS regulator, and a list of options.  What's New in V2? Larger Capacity - Fits up to four 5-gallon homebrew kegs Dual Gas Line Inlets - Feed two gas lines at different pressures, or one CO2 and one Nitro. 10% More Energy Efficient 15% Faster Cooling Times 40% Thicker Insulated Walls 25% Larger Condenser 30% Larger Evaporator This unit features an extended range digital controller that can adjust internal temperatures from 26 - 82°F. The higher end of this range is really convenient for homebrewers who often want to ferment at temperatures around 70°F. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed.   All kegerators come with Intertap faucets mounted on a stainless tower. These faucets are the newest, most advanced, forward sealing, beer faucets on the market today and will work perfectly for years. This model includes the all stainless steel version of the Intertap faucet.    Komos kegerators come standard with Duotight fittings and EVABarrier draft tubing. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing. Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free.   The KOMOS kegerator boasts a list of other unique features for a kegerator in this price range, such as the tower fan, included KOMOS CO2 regulator, stainless floor, rolling casters, and countertop drip tray.   Feature Summary: Stainless Steel Air Cooled Tower Stainless Steel Intertap Forward-Sealing Faucet(s) Duotight Fittings make connecting draft lines a breeze Digital Thermostat with wide 26 - 82° F temp range. Optimal ambient temperature is  65°F – 80°F (Please look at the Commercial Kegerator for use in garages or outdoors.  It has an ambient temperature range of 32°F–104°F) Robust KOMOS Dual Gauge Regulator included CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Countertop Style Drip Tray Stainless Steel Floor for additional keg support Includes EVABarrier beer and gas tubing Beverage line measures 4mm ID x 8mm OD 1 x 1.7m length of line per tap Gas line measures 5mm ID x 8mm OD 1 x line of varying length depending on number of taps (2, 2.5, or 3m) 4 Tap model includes uncut rolls of beverage & gas line We recommend cutting beverage lines to 1.7-2m lengths (5.5-6.5 ft.) Gas lines can be cut to whatever length best suits your needs Duotight adapters for draft shank and regulator connections Duotight tee fittings for splitting gas lines (2, 3, 4 tap only) You will need to purchase additional keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny For ball lock and pin lock disconnects we recommend the Duotight 8mm x 1/4" flare fitting For commercial sanke keg couplers we recommend Duotight 8mm x Female Beer Thread fitting Detailed instructions on assembly and use Specifications: 23.75" wide 25" deep  31.5" with CO2 mount 32.5" Tall (fridge only) 35" with Caster wheels 48.75" with tower 51" with Casters and Tower 110 v - 60 hz 0.8 Amp draw Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 Refrigerator only option does not include tower, faucets, duotight connectors, and tubing.

Read more less

Safely control the flow of CO2 with Micro Matic's Premium Plus dual gauge co2 regulator low pressure primary regulator with an in-place check valve in the shutoff preventing liquid from backing up into the regulator. This is useful for homebrewers who use corny kegs as most corny kegs have no check valves on the keg couplers (ball lock fittings). For added safety, this model has an integrated pressure relief valve that vents if pressures exceed 55-65 PSI. This primary regulator comes with an output gauge that monitors pressure up to 60 PSI to provide you options for different beers while the tank gauge has a 0-3000 PSI range so you know how much pressure remains in your cylinder. Premium Plus regulators come standard with a tamper-evident adjustment screw and bonnet, preventing unauthorized adjustment to gas pressure which can cause foaming/performance issues.  Micro Matic is committed to producing the best quality gas equipment in the industry. Made right here in the USA, every regulator that leaves their plant goes through a rigorous quality control testing process ensuring accuracy, reliability, and optimal performance in the market. The Premium Plus regulator offers industry-leading features, providing a better performing, better quality, and better-tested regulator.  CO2 GAS REGULATOR FEATURES  Adjust pressure from 0 to 60 PSI  Built for durability: forged brass body, accurate machining, tin nickel plated  Useful for homebrewers who use corny kegs as most corny kegs have no check valves on the keg couplers (ball lock fittings)  Premium quality metal gauges for durability  One piece heavy duty seat capsule  Constant pressure supply at high output flow rates  Factory leak tested at 2900 PSI  Tamper-evident adjustment screw and bonnet  Durable built-in long-lasting solid nylon inlet seal  Enlarged CO2 port for high volume  Safety relief valve releases at 55-65 PSI  Made in the USA 🦅🇺🇸 For home or commercial use 

Read more less

A replacement lid for Cornelius (Corny) and Firestone kegs. Pressure relief valve included. Includes pressure relief valve and lid o-ring (not pictured).

Read more less

This economical faucet option has a polished chrome-plated brass finish that will add character to either your bar/restaurant or home bar. Fits standard North American shanks. Features Cost effective draft beer faucet Highly polished chrome-plated brass finish Body and lever made of chrome-plated brass, and easy to use with quick handle action Faucet fits U.S. specification knobs and shanks Made in the USA 🦅🇺🇸 Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Read more less

These tap handles come with a removable, erasable chalkboard surface. Additionally, the back of the tap handle features a chalkboard surface that can be written on as well, which is handy and cool if your tap handle is seen from both sides. The insert is made of a thin sheet of metal and coated with chalkboard paint. The outer portion of the tap handle is made of wood and also painted with chalkboard paint. Includes removable metal chalkboard insert Back of tap handle also serves as chalkboard surface Dimensions: 7.25" H x 2.25" W x 0.75" D

Read more less

3/8" ID clear vinyl beverage and gas tubing. Accuflex Bevlex 200 PVC Tubing is used for draft beer transfer and BIB soft drink applications. Its special dual durometer construction combines a low extraction inner contact surface with a flexible outer layer to provide excellent kink resistance and taste protection. NSF-51 Listed. Inside Diameter (ID): 3/8" Outside Diameter (OD): 5/8" Clamp Size: 18.5mm Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.

Read more less

This Duotight tee fitting is compatible with EVABarrier 8 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

Stainless steel 1/4" mfl tailpiece.

Read more less

5/16" Hole, 3/8" Barb Shank TailpieceShank Tailpiece for 5/16" ID HoseNickel Plated

Read more less

This hex nut to hex nut beer draft beer line assembly will connect a sanke coupler to a faucet shank. Includes: 5' of 3/16 ID clear vinyl draft tubing 2 x 304 stainless steel barbed tailpiece 2 x hex nut (chrome plated brass) 2 x hex nut washer 2 x 13.3 stepless oetiker clamp

Read more less

Replacement o-ring for co2 tank nipple inlet. .424id x .103cs 70duro

Read more less

This stainless steel flow control disconnect will eliminate the guess work of balancing draft lines. Use the adjustment knob to dial in the ideal flow resistance based on the beverage being served. Flow control disconnects perform better than flow control faucets as they put the point of resistance at the beginning of the beverage line instead of at the end. When beer passes through the flow control apparatus inside the faucet, turbulence will cause carbonation to come out of solution and foaming issues occur.  Flow control disconnects on the other hand have the ability to restrict the flow before the beer enters the beer line so the head pressure created by the beer line keeps the carbonation in solution. 1/4" flare thread for beverage line connection. Please note: make sure your keg post o-rings are in good condition before using this fitting. If they are overly worn and you are not getting a good seal, replace the post o-ring then re-attach the ball lock fitting.

Read more less

The NukaTap Flow Control beer faucet features a forward sealing design with the added benefit of having a lever to adjust beverage flow. In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transferring to your beer while you pour. The Flow Control model is perfect for users that often switch between beer styles with different carbonation levels, or want to conveniently switch from pouring pints to filling growlers without having to make adjustments to the regulator pressure settings. Generation 2The NukaTap Flow Control G2 uses a completely new flow control mechanism with better sealing properties against the shank as well as improved flow control. Similar to the Intertap line of faucets, but with improved laminar flow and reduced first pour foam due to its lower thermal mass. The NukaTap is compatible with all Intertap accessories, except for the self-closing spring. The NukaTap FC uses a specially designed self-closing spring. Made from stainless steel Shuttle made from TPV O-rings made from EPDM

Read more less

This kit allows you to connect to and dispense from a sanke coupler. It includes 5' of 3/16" ID draft tubing, handheld faucet, 304 stainless steel barbed tailpiece, 13.3 stepless clamp, and a hex nut with washer. We recommend selecting the black draft tubing if dispensing outdoors.

Read more less

Replacement o-ring for Cornelius keg post.

Read more less

This gas in ball lock post bulkhead assembly allows you to add a ball lock post just about anywhere. Create your own pressure vessel or attach it to an aluminum gas manifolds for a quick connect option. 1/4" BSP threads and locking nut.

Read more less

This modular gas manifold will allow you split one CO2 line to four of them.  Each line can be turned off individually without affecting the flow to other kegs.  Each ball valve contains a check valve that ensures no beer or gas can flow between the two kegs.  The barbs are all 5/16" which is standard for gas line in the beer industry.   If later, you decide to add an additional keg this manifold can be expanded using the Add On Assembly.

Read more less

This modular gas manifold will allow you split one CO2 line to three of them.  Each line can be turned off individually without affecting the flow to other kegs.  Each ball valve contains a check valve that ensures no beer or gas can flow between the two kegs.  The barbs are all 5/16" which is standard for gas line in the beer industry.   If later, you decide to add an additional keg this manifold can be expanded using the Add On Assembly.

Read more less