Draft Supplies
Ball Lock Post Bulkhead - Gas In
This gas in ball lock post bulkhead assembly allows you to add a ball lock post just about anywhere. Create your own pressure vessel or attach it to an aluminum gas manifolds for a quick connect option. 1/4" BSP threads and locking nut.
$11.99
4-Way Modular Gas Manifold
This modular gas manifold will allow you split one CO2 line to four of them. Each line can be turned off individually without affecting the flow to other kegs. Each ball valve contains a check valve that ensures no beer or gas can flow between the two kegs. The barbs are all 5/16" which is standard for gas line in the beer industry. If later, you decide to add an additional keg this manifold can be expanded using the Add On Assembly.
$48.99
3-Way Modular Gas Manifold
This modular gas manifold will allow you split one CO2 line to three of them. Each line can be turned off individually without affecting the flow to other kegs. Each ball valve contains a check valve that ensures no beer or gas can flow between the two kegs. The barbs are all 5/16" which is standard for gas line in the beer industry. If later, you decide to add an additional keg this manifold can be expanded using the Add On Assembly.
$38.99
Pressure Gauge, 0-60 PSI
Replacement pressure gauge 0-60 PSI 1/4" NPT bottom inlet Right hand threads
$12.99
Regulator Nut Wrench
Just keep this handy Co2 nut wrench hanging on the regulator inlet and you'll never have to hunt down a wrench when it's time to change your tank. Specifications: 1 1/8" Hex Offset Closed End
$4.99
Duotight Removal Tool and Tube Cutter
This 2-in-1 tubing cutter is hard to beat for clean, straight cuts. It is developed specifically for EVABarrier draft line, but is also compatible with any tubing that is 3/8" OD or smaller. Features a 8mm jaw on the back of the unit to easily pull the collet back when removing tubing from Duotight fillings.
$5.99
3/8'' Barbed Tee, Stainless Steel
3/8” barbed tee, stainless steel.
$3.99
Intertap Tower Shank
This stainless steel Intertap Tower Shanks will fit in any 3" diameter draft tower. The 1/4" tailpiece is Duotight compatible and pairs perfectly with the Duotight 6.5 mm x 8 mm reducer, allowing you to quickly and easily connect 8mm OD EVABarrier draft line. Duotight fitting pictured is sold separately. Please note these shanks are not compatible with Perlick brand faucets. WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
$17.29
6pk - O-ring for Universal Poppet
Universal poppet valve fits most kegs.
$3.99
Bronco Sankey Picnic Hand Pump
This pump is great for parties and special occasions. This is a hand pump tap, so your beer will go flat overnight. This is designed for parties where you plan on drinking the whole keg that same day or night. American Sanke D System Black Lever Coupler Low Profile Plastic Pump
$59.99
Torpedo Keg Stainless Steel Handheld Faucet
This handheld draft faucet from Torpedo Keg is made with stainless steel components. A high-quality option compared to standard plastic picnic faucets or cobra taps. 1/4 OD Barb Constructed of 304 Stainless Steel
$19.99
Standard Beer Faucet - Chrome Plated with Stainless Steel Lever
This economical faucet option has a polished chrome-plated brass finish that will add character to either your bar/restaurant or home bar. Fits standard North American shanks. Features Economical draft beer faucet Highly polished exterior surface for a brilliant finish Body, shaft and collar is constructed of chrome-plated brass Stainless steel lever is more durable than brass when used with tall, heavy handles Faucet fits U.S. specification knobs and shanks Made in the USA 🦅🇺🇸 Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
$28.99
Faucet Friction Washer
Facuet friction washer
$0.50
Dual-Threaded Insert for Wooden Taphandles
Create your own tap handles with this insert. Simply drill a 1/2” hole in a piece of wood and thread the insert with a 3/8”, 16 thread per inch bolt with a nut attached; you can also use a coin. Once inserted, remove the bolt and attach your tap handle to your faucet.
$2.99
Duotight 8 mm (5/16 in.) Ball Valve
This Duotight ball valve can be used as an inline shut off valve on draft lines. Compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$3.49
Pressure Gauge, 0-30 PSI
Replacement regulator pressure gauge 0-30 PSI 1/4" NPT bottom inlet Right hand threads Blowout back safety feature
$12.99
Premium Plus Secondary Regulator 0-60psi
Safely and effectively control the flow of CO2 to a single keg in your draft beer system with this made in the USA, Micro Matic secondary regular. Secondary gas regulators reduce pressure from a primary regulator or gas blender, and provide this lower pressure to each individual keg. This secondary regulator comes with a single gauge with an adjustment range from 0-60 PSI range so you can quickly monitor the amount of gas flowing from the gas source to the keg. For added safety, this model has an integrated pressure relief valve that stops the gas flow if pressure gets too high (55-65 PSI). Premium Plus regulators come standard with a tamper evident adjustment screw and bonnet, preventing unauthorized adjustment to gas pressure which can cause service issues. Features Adjust pressure from 0 to 60 PSI Built for durability: forged brass body, accurate machining, chrome plated finish Premium quality metal gauges for durability Tamper evident adjustment screw and bonnet Nickel-plated valve seats for high corrosion resistance Enlarged CO2 port for high volume Safety relief valve releases at 55-65 PSI Factory leak tested at 145 PSI Made in USA Specifications: Performance: 1 Pressure / 1 Product Height: 7-1/4" Width: 3-3/4" Depth: 5-1/2" Output Pressure Gauge: 0-60 PSI, for accurate product pressure Outlet Barbs: 3/8" O.D. (To fit 5/16" I.D. Gas Hoses) Pressure Relief Valve: Safety Pressure Relief Valve Releases at 55-65 PSI Capacity: Safety pressure relief valve releases at 55-65 PSI
$69.99
Intertap Stout Spout
Simply unscrew the normal spout on an Intertap faucet and screw this stout spout in its place to pour your nitro brews. This spout has a creamer/aerator disc inside that strips out the nitrogen gas for a creamier beer. Type 304 Stainless Steel Construction.
$12.99
1/2" Vinyl Draft Line Tubing
1/2" ID clear vinyl beverage and gas tubing. Accuflex Bevlex 200 PVC Tubing is used for draft beer transfer and BIB soft drink applications. Its special dual durometer construction combines a low extraction inner contact surface with a flexible outer layer to provide excellent kink resistance and taste protection. NSF-51 Listed. Inside Diameter (ID): 1/2" Outside Diameter (OD): 3/4" Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.
$2.25 - $129.00
Premium Plus Double Gauge Nitrogen Regulator
Safely control the flow of nitrogen to a single keg with this made in the USA, Micro Matic Premium Plus primary low pressure nitrogen regulator. The primary nitrogen regulator is designed to decrease the gas cylinders high pressure to a lower, usable pressure for: mix gas (CO2 - N) for beer, wine and cold brew dispensing or servicing a gas blender. For added safety, this model has an integrated pressure relief valve that stops the gas flow if pressure gets too high (at 55-65 PSI). This primary regulator comes with an output gauge that monitors pressure up to 60 PSI to provide you options for different beers while the tank gauge has a 0-3000 PSI range so you know how much pressure remains in your cylinder. Premium Plus regulators come standard with a tamper evident adjustment screw and bonnet, preventing unauthorized adjustment to gas pressure which can cause foaming/performance issues. Features Adjust pressure from 0 to 60 PSI Built for durability: forged brass body, accurate machining, chrome plated finish Premium quality metal gauges for durability Factory leak tested at 2900 PSI Tamper evident adjustment screw and bonnet Nickel-plated valve seats for high corrosion resistance Quad-ring inlet seal at tank connection Fixed exchangeable inlet seal Enlarged nitrogen port for high volume Safety relief valve releases at 55-65 PSI Made in USA For home or commercial use Use for mix gas (CO2 - N) for beer, wine and cold brew dispensing or servicing a gas blender NOTE: The primary nitrogen regulator is designed to decrease the gas cylinders high pressure to a lower, usable pressure for: mix gas (CO2 - N) for beer, wine and cold brew dispensing or servicing a gas blender. Specifications: Performance: 1 Pressure / 1 Product Output Pressure Gauage: 0-60 PSI, for accurate product pressure Tank Pressure Gauge: 0-3000 PSI, for accurate remaining tank pressure Outlet Barbs: 3/8" O.D. (To fit 5/16" I.D. Gas Hoses) Pressure Relief Valve: Safety pressure relief valve releases at 55-65 PSI
$84.99
Duotight BlowTie Spunding Assembly
The Blow Tie Spunding Valve complete kit is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style spunding valve is much more accurate than the poppet style. The blow off pressure can be easily set using the included Push-In Pressure Gauge. The kit includes everything you'll need to use the spunding valve right out of the bag. Kit Includes: BlowTie Pressure Gauge (0-40 psi) Ball Lock Disconnect Duotight Tee & Flared Duotight Fitting 2x Lengths of EVABarrier 8mm OD Tubing
$34.99
O-Ring - Keg Post - Green
Replacement o-ring for Cornelius keg post.
$0.50 - $3.99
Stainless Growler Filler Fitting
Fill your growlers with ease with this stainless fitting and 5/16" ID or 3/8" ID tubing. Faucet insert is 1/2" OD and the barb is 3/8" OD. Fits most standard faucets. Does not fit Intertap, Nukatap, or Perlick
$6.99
Check Ball Retainer, Sanke (D + S)
Check ball retainer for sankey D and S style couplers.
$2.99
1/4” x 1/4” Splicer, 304 S/S
1/4" X 1/4" hose splicer (for 1/4" ID hose) 304 Stainless Steel
$3.49
1/4'' ID Stainless Steel Tailpiece
1/4" ID, 5/16 OD Tailpiece Stainless Steel
$3.49
Faucet Adapter & Coupling Nut Kit
Includes only a faucet adapter and coupling nut so you can hook a tap to your corny keg.
$7.99
3" Stainless Steel Beer Shank Assembly
This 3" long stainless steel shank assembly has a 1/4" bore. The following is included in the assembly: 3" 304 stainless steel shank with 1/4" bore Locking ring Sleeve Coupling nut Lock nut Choice of either a black plastic flange or stainless steel flange
$25.99 - $29.99
Ball Lock Jumper Post
Make your cleaning day a breeze with this QD Jumper post. No need to remove the Ball lock disconnects at all. The cleaner solution goes right through the Ball Lock Keg cleaning post. Connect multiple beer lines and Ball lock kegs in a daisy chain and clean them all in one go. Specifications: Made of Stainless steel material. Includes O rings on both ends. Jumper between the beer lines for easy cleaning. Ball lock kegs are widely used in home-brewing. Hence a handy tool for all home-brewers. Note: Pictured ball lock coupler not included.
$5.99
Pin Lock Conversion Body Connect - Beverage Out
Convert a pin lock beverage out post over to a ball lock. Includes o-ring (not pictured) Does not include poppet valve
$7.50
20lb Co2 Aluminum Cylinder - Filled
In store pick up only. Does not ship. Filled 20 pound aluminum CO2 cylinder. Will dispense approximately 40 five gallon kegs before needing to be refilled or exchanged. Dimensions: 20.75" Tall x 7" wide. These are used cylinders that have been filled from a local vendor.
$184.99
Flare Fitting, 1/4" Male Flare x 1/4" Barb
1/4" male flare fitting to 1/4" barb. Commonly used with cold plates. Barb will fit 3/16" ID or 1/4" ID tubing.
$4.49
Elbow Tailpiece, 3/16'' Barb, Stainless Steel
Stainless steel elbow tailpiece with 3/16" Barb
$6.95
16gm CO2 Cartridge
16gm Co2 Cartridge Not Threaded
$1.50
Beer Transfer Assembly, Ball Lock to Ball Lock
Transfer beer from ball lock corny keg to ball lock corny keg with this jumper assembly. Includes 4 feet of 3/16" ID draft tubing and 2 CMB liquid ball lock connectors.
$26.99
KOMOS® Matte Black Draft Tower With NukaTap Faucet(s) (w/ Duotight Fittings)
KOMOS matte black draft tower with NukaTap faucets, EVABarrier draft line, and Duotight push-to-connect fittings. These are the same tower kits included with the KOMOS Kegerator. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing. Each tower kit comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. Includes: Stainless steel draft tower w/ Matte Black Finish NukaTap Stealth Bomber faucet(s) Stainless steel faucet shank(s) with Duotight tailpieces EVABarrier gas and beverage tubing Draft tower mounting screws Faucet wrench 1-3 Tap Tower Dimensions: 13.4 in. tall (without faucets) 3 in. tower diameter 4.4 in. base diameter 4 Tap Tower Dimensions: 13.4 in. tall (without faucets) 4.5 in. tower diameter Interior mounting holes (does not include bottom collar)
$114.99 - $249.99