Best Selling Products

This is a complete replacement silicone tubing kit for the pump and ball valve tubing on a 35L Gen 4 BrewZilla. Made from food grade silicone and temperature resistant to 356°F (180°C). KegLand Part Number: KL27731

Read more less

Master the art of pizza cooking with the ultimate tool—the perforated pizza peel! Spin the pizza for even cooking, lift it higher to flames to cook the top, or shield it from heat to protect the top while the crust cooks Perforations allows heat through to continue cooking the pizza while using the spinner and also allows excess flour to dislodge from the base Perfectly sized for HIZO Pizza Ovens Learning to use a pizza peel and developing your turning skills in the oven is most beneficial and highly recommended. It will take a bit of practice but using this tool will help you manage your pizza while it cooks—and the results will be well worth it! Pizza peels may come perforated or solid but perforated pizza peels have the benefit of allowing the heat from the pizza stone to cook your pizza as it turns and also allows excess flour to be dislodged from the pizza base. The turning peel can also be used as a handy tool to prevent the top of your pizza from overcooking when needed. You can do this by using the peel to shield the top of your pizza from the flame. The peel can also be used to lift the pizza toward the flame when you need to cook your crust or when your base has cooked but your crusts have not. This procedure allows you to manage the cook of your pizza with more precision. With some practice, learning to use a turning peel will give you the opportunity to cook your pizza with more precision against the heat. It will also allow you to turn your pizza without burning your fingers and misshaping your round pizza. Plus, don't forget the handle length of your peel. If you are using a pizza oven with a flame close to the front of the oven, you will need to use a long-handled peel to protect your hands. The size of your pizza oven and the pizza itself will determine the size of your peel. This 8" pizza peel is perfectly sized for the HIZO Pizza Oven. Approximately 8" round and 24" long.

Read more less

This stainless steel spigot for wide mouth glass carboys, jugs, and beverage dispensers. Stainless twist handle. This spigot is compatible with Farro Glass ported wide mouth glass carboys. Installation Instructions

Read more less

Beer Shank Extension Faucet Assembly - 3-1/8"L with 1/4" Bore. This Micro Matic, NSF-certified Beer Shank Extension Faucet Assembly is made of chrome-plated brass and is excellent for both home and commercial bars. The beer shank assembly uses Micro Matic's SpinStop™ technology, a simple solution that stops the spin and keeps the faucets upright. The assembly includes the flange, coupling nut, and lock nut necessary to attach it to the draft beer tower and beer faucet. Designed with 7/8"-14 (5/8" BSP U.S. Beer Industry Standard) straight pipe thread, this shank will work with all North American faucets. If you're using equipment from outside North America, you'll need to source a specialty shank. A high-end beer shank is crucial to serving up perfectly fresh beer from a draft beer faucet. The beer shank is inserted through your refrigerator or house wall. On one end, inside the fridge, you attach the beer lines. On the other end, the shank is connected to your draft faucet. Features Complete assembly Chrome-plated brass Connects beer lines to the faucet Micro Matic's SpinStop™ technology – keeps the faucets upright Highly durable Fits on North American faucets NSF certified Specifications Length: 3-1/8" Bore I.D.: 1/4" Thread: 7/8"-14 (5/8" BSP) (U.S. Beer Industry Standard) Material: Chrome Plated Brass Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Read more less

Beer line 1/4" x 1/2" stainless steel barbed splicer. Splices 3/16" I.D. Vinyl to 3/8" I.D. Vinyl 3/16" I.D. Vinyl to 1/2" I.D. Vinyl 1/4" I.D. Poly to 1/2" I.D. Vinyl Specifications Type:  Straight Connectors Material:  304 Stainless Steel

Read more less

Suitable for Gen 4 BrewZillas and Gen 1 65L DigiBoils. The feet of those brewing systems slot into the cutouts on the dolly plate to make moving your brewery around a breeze. Lock your brewery in place with two locking wheels. These dollies are highly recommended if you are using a Lift-N-Lock Pulley type system for your malt pipe to move the brewery into the exact spot that you need and move away. Please take note that the bolts are pushed through from the bottom, not top down. This Dolly Bundle is highly recommended for 65L and 100L BrewZillas. Includes: Reinforced Plastic Dolly Plate 100 mm Castor Wheels (2 locking, 2 non-locking) Mounting Hardware Plate Dimensions: 21.6" Ø x 0.7" Thick (550 mm x 20 mm) BrewZilla sold separately KegLand Part Number: KB11089 NOTE: Due to the redesigned base of the Gen 2 DigiBoil, these units will not rest in the cutout holes of the dolly plate. They can still be placed on top of the dolly, but use caution when moving the kettle, especially when full.

Read more less

Lupulin is the small yellow glands inside of a hop cone that contain alpha-acids and essential oils.  Through proprietary processing, Hopsteiner is able to separate the lupulin glands from the bract to provide a higher concentrate pellet containing less vegetal matter and more of the resins that boost flavor and aroma. Lupulin Pellets™ are a great option for your late hop additions and for dry hopping.  A high alpa acid hop from New Zealand. Nelson Sauvin is a highly prized, dual-purpose hop that has been used in a wide range of styles by craft brewers. It has a distinctive aroma, similar to Sauvignon Blanc wine or crushed gooseberries. Notes of passionfruit and tangerine are apparent as well. Nelson Sauvin has a low cohumulone content, which imparts a smooth bitterness. Bitter Components Alpha Acid:    23 – 26% Beta Acid:       4.5 - 6.0% Co-Humulone: 31 - 34 Aroma Components Total Oils: 1.0 - 1.5 mL/100g Farnesene % of total oil:  0.22 - 0.26 Linalool% of total oil: 0.4 - 0.7

Read more less

Teflon gasket with 304 stainless mesh screen for 4" tri-clamp connections. Can be used as a filter screen to trap large particulates passing through T.C. fittings. Often used for distillation to retain activated carbon for filtering neutral spirits or used in pot distillation to retain botanicals in the vapor stream. The screen has a mesh size of 7 which will block particles larger than 2.83mm or 2830 microns. This slightly larger mesh size makes this screen ideal for use in a distillation basket. KegLand Part Number: KL28394

Read more less

Teflon gasket with 304 stainless mesh screen for 3" tri-clamp connections. Can be used as a filter screen to trap large particulates passing through T.C. fittings. Often used for distillation to retain activated carbon for filtering neutral spirits or used in pot distillation to retain botanicals in the vapor stream. The screen has a mesh size of 7 which will block particles larger than 2.83mm or 2830 microns. This slightly larger mesh size makes this screen ideal for use in a distillation basket. KegLand Part Number: KL28868

Read more less

The KegLand Heat Resistant Gloves are as impressive as they are functional with the ability to handle contact with temperatures of up to 932°F. This means that it is perfect for use with oven baking, hot pots, grilling, barbecuing, and woodstoves. Fashioned with high-quality aramid fibers which work to insulate and protect hands from burning temperatures, these gloves have a comfortable cotton and polyester lining which allows for breathability to resist sweating and a gauntlet-length style of design to protect wrists and forearm from scorching heat as well. These gloves are thick to provide excellent thermal protection and durability, but they are lightweight for extended use without fatigue. Sizing: Medium (fits most, but may be too small for very large hands). With heat resistance up to 932°F, these gloves are perfect for: Oven baking, hot pots, grilling, barbecuing, and woodstoves Adjusting logs in the fireplace Touching scorching hot utensils or food while boiling or frying Features: High-quality aramid fibers for insulation and cotton and polyester lining Designed for mobility and flexibility in mind Food-grade silicone layer Machine-washable (hang dry) KegLand Part Number: KL32292

Read more less

Perfect to use with the HIZO G14 Pizza Oven or your backyard gas grill. The double-sided griddle and flat skillet plate is the heavy-duty heat-retention cooking utensil you need in your arsenal. Weighing in at a whopping 9 lbs, this thick cast iron plate can really hold the heat! The HIZO double-sided skillet has a flat, smooth griddle side, and raised grill grooves for the other side. Both sides have a raised lip to handle some juices and oil to fry in. It can be moved around easily by the two removable handles in three location points on the plate. Directions for First Use: Conveniently pre-seasoned—simply wipe with a wet cloth and pat dry For super sizzling restaurant-style hot plate, preheat on high for at least 20 minutes Dimensions: 12" x 12" x 1" KegLand Part Number: KL24907

Read more less

The main purpose of a perforated pizza peel is to get rid of excess flour from the pizza base. But why do you want to get rid of the flour? When you’re baking pizza on hot stone or steel, you don’t want flour on the baking surface because it burns. Fine wheat flours that are most commonly used for baking pizza burn at fairly low temperatures. It’s this flour that causes trouble. Dusting your pizza peel with semolina flour, which can handle higher heat better, can also help. Burnt wheat flour will make the oven smoky and will result in more cleaning work when you’re done baking. The burnt flour tends to stick and can be a real pain to get rid of. Especially on an unglazed pizza stone. And if you’re not able to clean the stone properly, the flour can keep smoking next time you use the stone. Less Contact Surface – Less StickingA perforated peel has a smaller surface that is in contact with the pizza dough. This means pizza is less likely to stick to a perforated pizza peel. The reason is that the larger the contact surface is, the more friction there will be between the peel and the pizza. And more friction means it is more likely to stick. A smaller contact surface also means that you’ll need less flour when you’re dusting the peel. As noted above, you want as little flour as possible in the hot oven. So in addition to removing more flour from the dough itself, the peel need less flour due to the holes. Perforated pizza peels are also lighter than solid pizza peels, due to less metal on the carrying surface. This will make it easier to use the peel. Less Condensation – Crispier Pizza CrustWhen you take a hot pizza out of the oven, you may have noticed that water sometimes is formed under the pizza. This moisture makes the pizza less crispy, or even soggy. Using a solid pizza peel may create condensation when the hot pizza meets the cold (room temperature) surface. This is mostly a problem with metal peels since hot air is trapped between the pizza crust and the smooth carrying surface. Condensation happens when this hot air is cooled down to a certain point (it’s dew point), and water drops are created. When you’re using a perforated pizza peel, on the other hand, you will experience less condensation. The reason is that the holes let the hot air escape through the peel. Size Options 12" Square x 31" Long 14" Square x 31" Long Lightweight aluminum construction. Note: Phillips Head screwdriver required for assembly.

Read more less

DigiMash Upgrade Kit for 35L DigiBoil. Includes everything you need to use the DigiBoil as an electric, digitally controlled mash tun. Note: The Gen 2 DigiMash Upgrade Kit is backwards compatible with Gen 1 DigiBoils. Includes: False bottom Malt pipe Wire support  Malt pipe handle Malt pipe bottom screen Kegland Part Number: KL12980

Read more less

Flare threads make it quick and easy to disconnect and sanitize your air stone. Made from 316 stainless steel, 1/2" diameter, stone is 1" in length.

Read more less

This is a gasket / washer for 3/4 gaden hose fittings.

Read more less

Kerry orange flavoring is a 100% natural fruit flavoring made from high quality raw materials, sourced from select fruit juice processors to deliver exceptional flavor and aroma. Does not contain fermentable sugars. Suggested dosage rate: Dose to taste, starting at 0.25% by volume. Intended Use: Brewing, Distilling, or Winemaking Ingredients: Ethanol, Water, Natural flavors 4 ounce bottle 🇺🇸 Product of USA 🇺🇸

Read more less

Kerry yuzu flavoring is a 100% natural fruit flavoring made from high quality raw materials, sourced from select fruit juice processors to deliver exceptional flavor and aroma.  Does not contain fermentable sugars. Suggested dosage rate: Dose to taste, starting at 0.25% by volume. Intended Use: Brewing, Distilling, or Winemaking Ingredients: Water, Propylene Glycol, Natural flavor 4 ounce bottle 🇺🇸 Product of USA 🇺🇸

Read more less

Kerry lychee flavoring is a 100% natural fruit flavoring made from high quality raw materials, sourced from select fruit juice processors to deliver exceptional flavor and aroma.  Does not contain fermentable sugars. Suggested dosage rate: Dose to taste, starting at 0.25% by volume. Intended Use: Brewing, Distilling, or Winemaking Ingredients: Propylene Glycol, Water, Natural flavor 4 ounce bottle 🇺🇸 Product of USA 🇺🇸

Read more less

Brass hose stem. 5/16" barb 1/4" female pipe thread (fpt)

Read more less

Connect a 4" TC fitting to a 1.5" TC fitting with this reducer.  Made from 304 stainless steel.

Read more less

This Duotight 8 mm (5/16") adapter is designed to suit the Nukatap Mini and will allow you to couple the faucet to a wide range of other 8 mm Duotight fittings. This includes attaching it to the Duotight Flow Control Ball Lock Disconnect. This particular type of flow control ball lock disconnect includes a "tang" at the top of the push in fitting that couples with this adapter. The combination of the two fittings prevents the faucet from spinning around while in use.

Read more less

The Duotight In-Line Regulator works with both gas and liquid. Easily adjust the flow can be adjusted with the yellow adjustment knob. 6.35 mm Duotight fittings at both inlet and outlet make this unit perfect for use with 6.35 mm OD tubing.  Features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge. The size of the Duotight connection and the extended 0-150 PSI pressure range makes this model perfect for stepping down the pressure of your mains water line for use with water filtration or RO systems. Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 6.35mm (1/4") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-150 psi Made with quality EPDM seals Wall mountable WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge.

Read more less

KOMOS stainless steel draft tower with matte black finish. Includes EVABarrier draft line, and Duotight push-to-connect fittings. These towers do not include faucets so you can add your existing ones or choose new ones. However, Please note that Perlick Flow Control faucets are not compatible with the included Intertap tower shanks. These are the same tower kits included with the KOMOS Kegerator. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing. Each tower kit comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. Includes: Stainless steel draft tower with matte black finish Stainless steel faucet shank(s) with Duotight tailpieces EVABarrier gas and beverage tubing Draft tower mounting screws Faucet wrench 1-3 Tap Tower Dimensions: 13.4 in. tall (without faucets) 3 in. tower diameter 4.4 in. base diameter 4 Tap Tower Dimensions: 13.4 in. tall (without faucets) 4.5 in. tower diameter Interior mounting holes (does not include bottom collar)

Read more less

Convert the BrewBuilt T.C. brewing kettle into a mash tun using one of these false bottom kits. The heavy duty false bottom rests low in the kettle, utilizing a tri-clamp style maximizer that reduces dead space and pulls from the very bottom of your kettle, leaving no wort behind. A Silicone gasket rims the False Bottom, ensuring a tight seal to the wall with no chance of grain bypass. A handle is welded to the top of the false bottom for easy removal. Specifications: 1.5" tri-clamp and gasket included Welded T.C. maximizer False bottom gasket for tight seal Welded legs and handle Made from 304 stainless steel NOTE: These false bottom kits will fit all BrewBuilt T.C. kettles, including the electric kettle with SlingBlade heating element. It is not recommended converting the electric kettle into a mash tun as the element will scorch the grain. If you wish to use the false bottom in your boil kettle, it should be noted that the screen is designed to filter grain, so fine particle vegetal matter will pass through.

Read more less

Drop Ships from vendor. Please allow additional time for processing. BrewBuilt's T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. The appetite for tri-clamp fittings continues to grow in the homebrewing market as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day. With the ball valve hardware pack, you'll have everything you need to use the kettle on Day 1. The advantage of this model is that you're getting a fully functional kettle and the lowest cost. The disadvantage is that ball valves tend to trap a small amount of wort inside them, so you may need to break it down for cleaning in between brew days.   If you want the ultimate sanitary option, the BrewBuilt Brew Kettle with Butterfly Valve hardware pack is available. Or you can purchase the kettle without fittings and customize it with the fiitings that best suit your needs.   Ball Valve Pack Includes: 1/2" Ball Valve 2 x Tri-Clamps 2 x Tri-Clamp Gaskets T.C. to 1/2" MPT adapter 1/2" MPT x 5/8" Barb T.C. End Cap (for plugging thermometer port) Teflon Tape These days homebrewers have a lot of strong choices when it comes to their kettle purchase. BrewBuilt has adopted a modern feature set designed to make the brew day easier. Silicone handle and lid grips help prevent burns. Etched internal volume markings make filling the kettle for mash or boil simple. Welded valve and thermometer ports are leak-free and never require maintenance--no more discovering worn gaskets on brew day. Sealed handle rivets are strong and allow the entire kettle to be filled if necessary. And perhaps best of all, it features the signature BrewBuilt notched lid with a silicone plug that allows the lid to be in place while using immersion chillers or an Ultimate Sparge Arm. These kettles are truly designed for brewing. Key Features: Two welded T.C. couplers for a lifetime of leak free use AISI304 Stainless Steel construction for longevity and excellent corrosion resistance Stainless handles and rivets for secure lifting Silicone coated kettle and lid handles for heat protection Lid is designed to conveniently hang from a handle 4 mm Tri-Clad Bottom with Aluminum Core heats quickly and disperses heat evenly to prevent scorching Induction burner compatible 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 1.2:1 height to diameter ratio provides optimal evaporation rate during boiling Industry-First notched lid with silicone plug accommodates an immersion chiller or sparge arm Internally etched volume markers from top to bottom for easy filling BrewBuilt Homebrewing Products: Designed for Brewing, Built to Last. Size Kettle ID (in.) Height (in.) 10 13.78 16.54 15 15.75 18.90 20 17.72 21.26 30 19.69 23.62 50 23.62 28.30   Drop Ships from vendor. Please allow additional time for processing.

Read more less

Replacement capillary tubes for chromatography kits. 100 tubes in a pack.

Read more less

These Organic Hard Red Wheat Berries are grown in the Pacific Northwest. Wheat berries are an unmalted wheat that have a strong grain flavor, and a very light straw color. Unmalted wheat is used in many traditional Belgian styles to add flavor and cloudiness, and improve head formation. The starch in raw grain is not gelatinized and the protein content is high. Depending upon use, a cereal mash and/or protein rest may be required. Wheat berry crops are either “spring” or “winter” crops. Typically the harder the berry, the higher the protein content. Since spring wheat generally has higher protein (i.e. gluten) and gluten is what allows dough its shape, elasticity, and rise; hard red spring wheat tends to be a better flour choice for sandwich-style bread. Winter red is wonderful for mixing with other types of flour to produce Old World style breads.  

Read more less

Does not ship, for In-Store Pickup only. This item is 24 amps. Make sure you have the correct power requirements. A motorized shredder for use with apples, pears or any other fruit which needs processing before it can be pressed for its juice. Not for use with peaches, cherries or other pitted fruits. To use, fruit is fed into the hopper at the top of the machine, where it falls on to spinner cutter blades which shred the fruit. The mash is then pushed out of the machine and into your waiting bucket where it can then be transferred to the press. Extremely simple to operate, and safe since the cutting blades are buried deep in the machine during operation. Sturdy, all stainless steel construction means that you know this machine will last you for years and years. Simple disassembly for cleaning. Runs on 110V power at 24 amps with a 2.8HP Motor. Made in Italy.

Read more less

Celebrate simplicity with Heritage Estates. In just four weeks you can craft your own wine that is perfect for celebrating everyday moments. Pinot Noir Style A dry and light-bodied wine with crisp acidity and very little tannin; plenty of fruit flavour with some cherry and red berry notes. Food Pairings Serve with pasta and roasted vegetables or grilled eggplant. Specifications Weeks: 4  Varietal: Pinot Noir Sweetness: Dry Oak: Light Body: Medium ABV: 11.8% Kit Instruction Sheet

Read more less

Free Shipping to the Lower 48 States.  Drop ships from distributor. Compact and simple to use, with a small footprint for brewing indoors the Grainfather G30³ provides a home brewery system that with superior design, innovative features and the latest technology, allows you to brew professional quality craft beer at home. The Grainfather, is your all in one brewing system, to make beer from grain. The sleek look, user friendly, intuitive design, and innovative features, make this your perfect brewing companion for both experienced and beginner all grain brewers. It is made from high quality 304 grade stainless steel with a 8 US Gal capacity, designed to make up to 6 US Gal of beer from one brew. The Grainfather G30³ includes The Grainfather unit and Counter Flow Wort Chiller. New Features on the G303: 1. ) Auto Reset Switch Lifting and reaching underneath the boiler to reset your electric homebrewing system is now a thing of the past! The new auto reset switch avoids needing a physical, manual switch to reset the system; ensuring homebrewers can quickly and easily resume their brew day if an unexpected reset is required. 2. ) Grain Basket Assembly The newly redesigned Perforated Edge Grain Basket on the G303 features side wall perforations to improve wort flow and to prevent a stuck mash. In addition to the redesigned grain basket, the new Rolled Edge Mash Plate filters the wort efficiently without warping. The new rolled edges mean that there is no need for silicone seals, making the plates much easier to install, remove, and clean. The new grain basket and mash plate design means that there is no need for overflow pipework or a top plate, allowing for a hassle-free brew day. Same Great Features: Benefits of Electric Heating The Grainfather is electrically powered and designed to be used indoors. No need for burners, or hot plates, just plug in and go! It is fitted with a controlled heating element so that the correct power can be used depending on what stage of the brewing process you are at. A gentler heat is used at certain stages for accurate temperature control and and to minimise the risk of scorching and after the mash it can also ramp up the heat quickly for when more vigorous heating is required. Heating from mash to boil takes as little as 20 minutes. Wireless Control for Heat, Power, and Pumping Use the Grainfather G30³ Control Box in conjunction with the Connect App and Grainfather Brewing Community for the ultimate brewing experience. Create your recipes on the Grainfather Brewing Community and then sync these recipes with the Connect app. The control box has Bluetooth connection to your mobile device so it can be controlled remotely. This allows you to multitask or simply relax while brewing and then be alerted when to return to your next step.  Features: PID algorithm works in conjunction with a triac for more stable heating and so you can control power output Programmable step mashing Delayed heating - fill your Grainfather with water the night before and wake up to your water at strike temperature ready for brewing straight away Change between celsius and fahrenheit easily Waterproof graphic display Use in manual mode or with app Grainfather App Ability to import recipes (Beer XML files) - NOTE: iOS9 and higher Set your own boil temperature (for different altitudes) Change between celsius and fahreheit easily Grainfather calculators provided in app Create recipes on the Grainfather Brewing Community and then sync these with the Connect App to brew Powerful Magnetic Drive Pump A 6 Watt, 1,800 RPM magnetic powered pump has been fitted to recirculate the wort through the grain bed for maximum brewing efficiencies. This is also used during the cooling stage to pump hot wort through the wort chiller. The pump also makes the cleaning process quick and easy by pumping the cleaning detergent through all the pipe work. The magnetic drive pump has been selected after rigorous testing of multiple pump styles to ensure it meets the tough demands required of continuous brewing. The pump is concealed by a stainless pump cover, which is easy to pop open, giving you direct access. A pump filter is fitted inside the Grainfather to prevent hops and stray grain from entering the pump or pipework, keeping the wort clear while also preventing any blockages.  Counter Flow Wort Chiller A counter flow wort chiller has two connection points. One side is connected to the Grainfather, while the other is connected to the cold tap water. The hot wort is then pumped through copper inner coil while the cold water is pumped through the outer in the opposite direction, providing instant cooling and heat exchange. The cooled wort can then be pumped directly into your clean, sterile fermenter. This reduces the chance of contamination as nothing is inserted in the wort, and it is only passing through the wort chiller one single time, going straight to the sterile fermenter where the yeast is added. 6 US Gal of wort can be cooled in as little as 20 minutes. The cooled wort temperature will be cooled to approximately 41°F above whatever your tap water temperature is.  Support Grainfather is fully supported around the world by a fantastic support team who love brewing just as much as you do. Our support team is here for any technical enquiries on brewing or how the Grainfather works, as well as general customer service enquiries. All Grainfather G30³ units come with a 3-year warranty.  → Grainfather Warranty Policy PLEASE NOTE: All Grainfather G30s contain a yellow packaging strip in the boiler. This should be discarded before you begin brewing. Specifications 304 Grade stainless steel body 220 - 240V 8 US Gal Capacity Expandable grain basket to suit grain bills up to 20 lb A robust magnetic drive pump (6 watt, 1800 RPM) Counter flow wort chiller which can cool wort to less than 68°F within approx 20-30 minutes. Tempered glass lid for maximum durability, heating efficiencies and visibility during your brew day. Clips to easily convert your Grainfather into a home distillery with the Pot Still Attachments  

Read more less

This capping bell can be added to the Monster Bench Bottle Capper for use with 29mm crown caps.

Read more less

A general use, laboratory support stand used for SO2 testing kits. Support stand: 6"x11" Rod: 36"

Read more less

Take your distillation to the next level with super high density spiral prismatic packing. The packing maximizes the purity of the collected distillate from your reflux still, ensuring the best possible product is collected. The prismatic spiral shape is designed to maximize its surface area helping to separate out fractions in your reflux, resulting in a highly pure and neutral end product. It is not recommended for use with pot stills when producing flavored spirits. Note: It is recommend to soak and wash the SPP before its first use with a 50:50 mix of vinegar or citric acid and warm to hot water to remove all manufacturing oils. Sizing: The SPP is approximately 3.35mm x 3.45mm. Suitable to fill a 10” x 2” T.C. Extension Tube. One 500g bag of SPP is enough to fill approximately 500 mL (16.9 oz) of volume. The HETP (Height Equivalent to a Theoretical Plate) for this packing is approximately 30mm. That is roughly 33 theoretical plates per meter. KegLand Part Number: KL25706

Read more less

Precisely read your finishing gravities in beer with this narrow-range, highly accurate hydrometer. The scale range is only .0.985-1.003, but the individual gradients are extra-large allowing for an easy read.

Read more less